MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

Introduction of MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

The MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. N'adịghị ka modul dịpụrụ adịpụ, MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Nhazi a na-eme ka usoro sekit dị mfe, na-ebelata ọnụ ahịa, ma na-eme ka arụmọrụ dịkwuo mma.

 

Features and Benefits of MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

Kọmpat imewe: N'ihi na ọ dịghị ihe mgbakwunye ikewapụ ọzọ achọrọ, MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123s are typically smaller and lighter in weight.

Ịrụ ọrụ dị elu: Mbelata ume ike n'ihi ihe ndị dịpụrụ adịpụ na-eme ka arụmọrụ ngbanwe n'ozuzu ya dịkwuo mma.

Ọnụ ala: A na-ekpochapụ ihe ndị dị oke ọnụ, na-eme ka ọnụ ahịa nrụpụta dị ala.

Nzaghachi ngwa ngwa: Ngwa ngwa mgbake Diode arụnyere n'ime ya (FRD) nwere ike ịgbanwe ngwa ngwa site na steeti gaa na steeti mgbochi, ibelata ngbanwe ọnwụ.

Ntụkwasị obi dị elu: A na-eji ihe dị elu na teknụzụ eme ihe iji hụ na arụ ọrụ kwụsiri ike ọbụlagodi na gburugburu ebe siri ike.

Ọ dị mfe ịwụnye na idobe: Oghere na njikọ ahaziri ahazi na-eme ka usoro nrụnye dị mfe ma na-eme ka nhazi ya dị mfe.

(MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123)

Specification of MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

This MMSZ2V4ET1 is a Zener diode. It regulates voltage at 2.4 volt. This specific voltage makes it useful for protecting sensitive circuits. It prevents damage from small voltage spikes. The diode handles up to 500 milliwatts nke ike. This power rating suits many low-power applications. Its small SOD123 surface-mount package saves space. This compact size is good for modern electronics. Assembly is easy using standard pick-and-place machines. The component is designed for stability. Its voltage tolerance is tight, typically ±5%. This ensures reliable performance. The diode works well over a standard temperature range. This range is usually -65°C to +150°C. It provides consistent voltage regulation. Leakage current is very low when off. This minimizes wasted power. The device reacts quickly to voltage changes. This fast response protects circuits effectively. Common uses include voltage reference circuits. It stabilizes power supply outputs. It safeguards inputs on microcontrollers. It protects signal lines. It clamps transient voltages. The SOD123 package is industry standard. Availability is generally good. This diode offers a simple solution. It provides precise voltage control. It is cost-effective for its function. Designers choose it for basic protection needs. It integrates easily into various circuit layouts. This part is reliable for everyday electronic designs.

(MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123)

Applications of MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

The MMSZ2V4ET1 is a Zener diode. Its main job is voltage regulation. It holds a steady voltage at 2.4 volt. This happens when you reverse-bias it correctly. The diode blocks current until voltage hits 2.4V. Then it starts conducting heavily. This action clamps the voltage. It prevents the voltage from going higher than 2.4V. This protects sensitive parts.

Its small SOD123 package is good. Ọ na-echekwa ohere na bọọdụ sekit. This is vital in modern electronics. Think phones, mbadamba nkume, wearables. Every millimeter counts. The 500mW power rating is standard. It handles typical loads. You see it in many basic circuits.

One major use is protecting inputs. Microcontrollers and logic chips hate overvoltage. The MMSZ2V4ET1 sits at the input pin. It clamps any voltage spikes. It keeps the input safe. It prevents damage from static electricity or noise. This is common in interfaces.

It also works as a simple voltage reference. Circuits sometimes need a known voltage point. This diode provides a stable 2.4V reference. It’s cheaper than complex reference ICs. It’s good enough for many non-critical tasks. Power supplies use it too. It stabilizes low voltage outputs. It ensures downstream parts get clean power.

Another application is level shifting. Sometimes signals need adjusting. This diode can clip signals to 2.4V. It helps match different logic levels. It’s a basic but effective solution. Designers like its simplicity and low cost. It’s easy to use. Just connect it across the supply or signal line. Add a series resistor. The resistor limits the current. This keeps the diode safe. It prevents burning out. The diode works reliably. It’s a fundamental building block. You find it everywhere needing precise voltage control or protection at 2.4V.

Nkọwapụta Ụlọ ọrụ

Ụlọ ọrụ PDDN Photoelectron Technology Co., Ltd., Ltd.(sales@pddn.com) bụ otu n'ime ụlọ ọrụ na-eduga na teknụzụ ọkụ eletrik na ngwaahịa ike, nke na-etinye aka n'ụzọ zuru ezu n'ịmepụta ihe ntụgharị anyanwụ， ihe ntụgharị, ndị na-achịkwa voltaji, nkesa kabinet, thyristors， modul， diodes， ndị na-ekpo ọkụ, na ngwaọrụ eletrọnịkị ndị ọzọ ma ọ bụ semiconductors. Anyị ga-agba mbọ ịnye ndị ọrụ oke mma, ngwaahịa na-arụ ọrụ nke ọma na ọrụ nlezianya.

Ọ na-anabata ịkwụ ụgwọ site na kaadị kredit, T/T, West Union, na Paypal. PDDN ga-ebuga ngwa ahịa ndị ahịa na mba ofesi site na FedEx, DHL, site n'oké osimiri, ma ọ bụ site na ikuku. If you want high-quality MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123, biko zitere anyị ajụjụ; anyị ga-anọ ebe a inyere gị aka.

 

Ụzọ ịkwụ ụgwọ

L/C, T/T, Western Union, Paypal, Kaadị kredit wdg.

 

Mbupu

Site n'oké osimiri, site n'ikuku, site na nkwuwa okwu, dị ka ndị ahịa na-arịọ.

 

Ọnọdụ Nchekwa

1) Chekwaa na ebe akọrọ na ụlọ okpomọkụ.

2) Zere iru mmiri na oke okpomọkụ.

3) Jiri ozugbo imepechara akpa nkwakọ ngwaahịa dị n'ime.

5 FAQs of MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

What is the MMSZ2V4ET1 diode? The MMSZ2V4ET1 is a Zener diode. It regulates voltage at 2.4 volt. It handles up to 500 milliwatts nke ike. The package type is SOD123. This diode is for surface mounting. It stabilizes voltage in circuits.

What is the main use of this diode? This diode protects circuits. It prevents voltage spikes. It maintains a steady 2.4V output. You find it in power supplies. It also guards sensitive components.

What are the key specs? The Zener voltage is 2.4V. Power dissipation is 500mW. Forward voltage is 0.9V max. Leakage current is 5µA max. It works in tight spaces.

Why the SOD123 package? SOD123 is very small. It saves board space. It suits automated assembly. This cuts manufacturing costs. It fits high-density designs.

What conditions does it need? Store it from -65°C to 150°C. Operate it from -55°C to 150°C. Avoid high humidity. Handle with ESD precautions. Keep it dry before use.

(MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123)