MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

Introduction of MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

The MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123)

Specification of MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

This MMSZ2V4ET1 is a Zener diode. It regulates voltage at 2.4 volts. This specific voltage makes it useful for protecting sensitive circuits. It prevents damage from small voltage spikes. The diode handles up to 500 milliwatts of power. This power rating suits many low-power applications. Its small SOD123 surface-mount package saves space. This compact size is good for modern electronics. Assembly is easy using standard pick-and-place machines. The component is designed for stability. Its voltage tolerance is tight, typically ±5%. This ensures reliable performance. The diode works well over a standard temperature range. This range is usually -65°C to +150°C. It provides consistent voltage regulation. Leakage current is very low when off. This minimizes wasted power. The device reacts quickly to voltage changes. This fast response protects circuits effectively. Common uses include voltage reference circuits. It stabilizes power supply outputs. It safeguards inputs on microcontrollers. It protects signal lines. It clamps transient voltages. The SOD123 package is industry standard. Availability is generally good. This diode offers a simple solution. It provides precise voltage control. It is cost-effective for its function. Designers choose it for basic protection needs. It integrates easily into various circuit layouts. This part is reliable for everyday electronic designs.

(MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123)

Applications of MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

The MMSZ2V4ET1 is a Zener diode. Its main job is voltage regulation. It holds a steady voltage at 2.4 volts. This happens when you reverse-bias it correctly. The diode blocks current until voltage hits 2.4V. Then it starts conducting heavily. This action clamps the voltage. It prevents the voltage from going higher than 2.4V. This protects sensitive parts.

Its small SOD123 package is good. It saves space on circuit boards. This is vital in modern electronics. Think phones, tablets, wearables. Every millimeter counts. The 500mW power rating is standard. It handles typical loads. You see it in many basic circuits.

One major use is protecting inputs. Microcontrollers and logic chips hate overvoltage. The MMSZ2V4ET1 sits at the input pin. It clamps any voltage spikes. It keeps the input safe. It prevents damage from static electricity or noise. This is common in interfaces.

It also works as a simple voltage reference. Circuits sometimes need a known voltage point. This diode provides a stable 2.4V reference. It’s cheaper than complex reference ICs. It’s good enough for many non-critical tasks. Power supplies use it too. It stabilizes low voltage outputs. It ensures downstream parts get clean power.

Another application is level shifting. Sometimes signals need adjusting. This diode can clip signals to 2.4V. It helps match different logic levels. It’s a basic but effective solution. Designers like its simplicity and low cost. It’s easy to use. Just connect it across the supply or signal line. Add a series resistor. The resistor limits the current. This keeps the diode safe. It prevents burning out. The diode works reliably. It’s a fundamental building block. You find it everywhere needing precise voltage control or protection at 2.4V.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

What is the MMSZ2V4ET1 diode? The MMSZ2V4ET1 is a Zener diode. It regulates voltage at 2.4 volts. It handles up to 500 milliwatts of power. The package type is SOD123. This diode is for surface mounting. It stabilizes voltage in circuits.

What is the main use of this diode? This diode protects circuits. It prevents voltage spikes. It maintains a steady 2.4V output. You find it in power supplies. It also guards sensitive components.

What are the key specs? The Zener voltage is 2.4V. Power dissipation is 500mW. Forward voltage is 0.9V max. Leakage current is 5µA max. It works in tight spaces.

Why the SOD123 package? SOD123 is very small. It saves board space. It suits automated assembly. This cuts manufacturing costs. It fits high-density designs.

What conditions does it need? Store it from -65°C to 150°C. Operate it from -55°C to 150°C. Avoid high humidity. Handle with ESD precautions. Keep it dry before use.

(MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123)