MMSZ2V4ET1 DIOOD ZENER 2.4V 500MW SOD123

Introduction of MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

The MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Erinevalt isoleeritud moodulitest, MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. See disain lihtsustab vooluahela struktuuri, vähendab kulusid, ja parandab efektiivsust.

 

Features and Benefits of MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

Kompaktne disain: Kuna täiendavaid isolatsioonikomponente pole vaja, MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123s are typically smaller and lighter in weight.

Kõrge jõudlus: Isolatsioonikomponentide tõttu vähenenud energiakadu parandab üldist muundamise efektiivsust.

Madalad kulud: Kallid isolatsioonikomponendid elimineeritakse, mille tulemuseks on madalamad tootmiskulud.

Kiire reageerimine: Sisseehitatud kiire taastamise diood (FRD) saab kiiresti lülituda sisselülitatud olekust blokeerimisolekusse, lülituskadude vähendamine.

Kõrge töökindlus: Kasutatakse täiustatud materjale ja tehnoloogiaid, et tagada stabiilne töö ka karmides keskkondades.

Lihtne paigaldada ja hooldada: Standardsed liidesed ja ühendused lihtsustavad paigaldusprotsessi ja hõlbustavad hilisemat hooldust.

(MMSZ2V4ET1 DIOOD ZENER 2.4V 500MW SOD123)

Specification of MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

This MMSZ2V4ET1 is a Zener diode. It regulates voltage at 2.4 volti. This specific voltage makes it useful for protecting sensitive circuits. It prevents damage from small voltage spikes. The diode handles up to 500 millivatti võimsust. This power rating suits many low-power applications. Its small SOD123 surface-mount package saves space. This compact size is good for modern electronics. Assembly is easy using standard pick-and-place machines. The component is designed for stability. Its voltage tolerance is tight, typically ±5%. This ensures reliable performance. The diode works well over a standard temperature range. This range is usually -65°C to +150°C. It provides consistent voltage regulation. Leakage current is very low when off. This minimizes wasted power. The device reacts quickly to voltage changes. This fast response protects circuits effectively. Common uses include voltage reference circuits. It stabilizes power supply outputs. It safeguards inputs on microcontrollers. It protects signal lines. It clamps transient voltages. The SOD123 package is industry standard. Availability is generally good. This diode offers a simple solution. It provides precise voltage control. It is cost-effective for its function. Designers choose it for basic protection needs. It integrates easily into various circuit layouts. This part is reliable for everyday electronic designs.

(MMSZ2V4ET1 DIOOD ZENER 2.4V 500MW SOD123)

Applications of MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

The MMSZ2V4ET1 is a Zener diode. Its main job is voltage regulation. It holds a steady voltage at 2.4 volti. This happens when you reverse-bias it correctly. The diode blocks current until voltage hits 2.4V. Then it starts conducting heavily. This action clamps the voltage. It prevents the voltage from going higher than 2.4V. This protects sensitive parts.

Its small SOD123 package is good. It saves space on circuit boards. This is vital in modern electronics. Think phones, tablets, wearables. Every millimeter counts. The 500mW power rating is standard. It handles typical loads. You see it in many basic circuits.

One major use is protecting inputs. Microcontrollers and logic chips hate overvoltage. The MMSZ2V4ET1 sits at the input pin. It clamps any voltage spikes. It keeps the input safe. It prevents damage from static electricity or noise. This is common in interfaces.

It also works as a simple voltage reference. Circuits sometimes need a known voltage point. This diode provides a stable 2.4V reference. It’s cheaper than complex reference ICs. It’s good enough for many non-critical tasks. Power supplies use it too. It stabilizes low voltage outputs. It ensures downstream parts get clean power.

Another application is level shifting. Sometimes signals need adjusting. This diode can clip signals to 2.4V. It helps match different logic levels. It’s a basic but effective solution. Designers like its simplicity and low cost. It’s easy to use. Just connect it across the supply or signal line. Add a series resistor. The resistor limits the current. This keeps the diode safe. It prevents burning out. The diode works reliably. It’s a fundamental building block. You find it everywhere needing precise voltage control or protection at 2.4V.

Ettevõtte profiil

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) on üks juhtivaid jõuelektroonika tehnoloogia ja energiatoodete ettevõtteid, mis on täielikult kaasatud päikeseenergia inverterite väljatöötamisse， trafod, pinge regulaatorid, jaotuskapid, türistorid， moodulid， dioodid， küttekehad, ja muud elektroonilised seadmed või pooljuhid. Oleme pühendunud kasutajatele kvaliteetse pakkumise pakkumisele, tõhusad tooted ja tähelepanelik teenindus.

See aktsepteerib makseid krediitkaardiga, T/T, West Union, ja Paypal. PDDN saadab kaubad FedExi kaudu välismaistele klientidele, DHL, meritsi, või õhuga. If you want high-quality MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123, palun saatke meile päringud; me oleme siin, et teid aidata.

 

Makseviisid

L/C, T/T, Western Union, Paypal, Krediitkaart jne.

 

Saadetis

Merega, õhuga, ekspressi teel, vastavalt klientide soovile.

 

Säilitamistingimused

1) Hoida kuivas keskkonnas toatemperatuuril.

2) Vältige niisket ja kõrget temperatuuri.

3) Kasutage kohe pärast sisemise pakkekoti avamist.

5 FAQs of MMSZ2V4ET1 DIODE ZENER 2.4V 500MW SOD123

What is the MMSZ2V4ET1 diode? The MMSZ2V4ET1 is a Zener diode. It regulates voltage at 2.4 volti. It handles up to 500 millivatti võimsust. The package type is SOD123. This diode is for surface mounting. It stabilizes voltage in circuits.

What is the main use of this diode? This diode protects circuits. It prevents voltage spikes. It maintains a steady 2.4V output. You find it in power supplies. It also guards sensitive components.

What are the key specs? The Zener voltage is 2.4V. Power dissipation is 500mW. Forward voltage is 0.9V max. Leakage current is 5µA max. It works in tight spaces.

Why the SOD123 package? SOD123 is very small. It saves board space. It suits automated assembly. This cuts manufacturing costs. It fits high-density designs.

What conditions does it need? Store it from -65°C to 150°C. Operate it from -55°C to 150°C. Avoid high humidity. Handle with ESD precautions. Keep it dry before use.

(MMSZ2V4ET1 DIOOD ZENER 2.4V 500MW SOD123)