MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

Introduction of MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123)

Specification of MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

Below’s the MMSZ4693T1 Zener diode information. This component is a surface mount device. It supplies a secure 7.5 V reference voltage. The diode takes care of as much as 500 milliwatts of power dissipation. It uses the common SOD123 plastic package. This bundle is really little and conserves board room. Its small dimension makes it great for modern electronic devices. The voltage resistance is ± 5%. This means the actual Zener voltage remains between 7.125 V and 7.875 V. The diode manages voltage properly. It keeps the voltage near 7.5 V across its terminals when reverse biased. This occurs within its defined existing range. The typical operating current is around 5mA. Optimum current relies on problems. Power dissipation need to stay under 500mW. Exceeding this damages the diode. The diode has a favorable temperature level coefficient. This coefficient is roughly +2 mV/ ° C. Voltage raises somewhat as temperature level increases. Reverse leak current is very low. It’s commonly simply a few nanoamperes. The maximum leakage is 100nA at the examination voltage. This reduced leak is efficient. The diode functions accurately over a large temperature variety. The operating range is -65 ° C to +150 ° C. Storage temperature levels coincide. This matches requiring settings. Surface install setting up is uncomplicated. The SOD123 package works with standard reflow procedures. Hand soldering is additionally possible with care. This diode is generally used for voltage guideline. It safeguards delicate circuits from overvoltage spikes. It supplies a secure referral voltage. It secures voltage degrees in various circuits. You discover it in power products. It protects inputs on microcontrollers. It stabilizes voltage in sensor circuits. It serves in several consumer and industrial gadgets. Its small dimension and reliable efficiency are essential advantages. Valuable in space-constrained layouts needing specific voltage control.

(MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123)

Applications of MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ4693T1 is a Zener diode. It controls voltage at 7.5 volts. It manages up to 500 milliwatts of power. Its little SOD123 bundle fits easily on motherboard. This diode is extremely beneficial in lots of electronic circuits.

One primary job is voltage regulation. It maintains a consistent 7.5 V supply for sensitive components. Microcontrollers need secure voltage. Sensors usually need secure voltage as well. This diode supplies that defense. It prevents damage from voltage spikes.

Another vital usage is voltage clamping. It safeguards circuits from unforeseen high voltage. It “clamps” the voltage to 7.5 V. This quits voltage from going expensive. Input/output lines typically require this protection. Signal lines benefit from securing. It shields expensive parts.

Power materials utilize this diode. It aids tidy up the result voltage. It makes the voltage a lot more secure. Simple power circuits depend on it. It’s a low-cost way to enhance supply top quality. Battery-powered devices discover it handy.

It additionally acts as a voltage reference. Circuits need a well-known voltage point. This diode provides a set 7.5 V referral. Analog circuits use this for precision. Sensor calibration might need it. Timing circuits occasionally utilize it.

You see it in battery monitoring. It inspects if battery voltage drops also low. It causes low-battery warnings. Easy battery chargers use it for cutoff points. It guarantees batteries don’t over-discharge.

Its small size is a big benefit. Modern electronics are really compact. The SOD123 package conserves space. It functions well in limited styles. Mobile gizmos use it a whole lot.

It safeguards sensitive components. Transistors and ICs are easily damaged. This diode takes in damaging voltage spikes. It acts like a safety and security shutoff. This makes circuits much more trustworthy.

It is affordable. Zener diodes are inexpensive services. They use great efficiency for the cost. Developers pick them for spending plan projects. Hobbyists locate them simple to utilize.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

This is the MMSZ4693T1 diode. It’s a Zener diode. People often have questions about it. Here are five common ones.

What is the MMSZ4693T1? It’s a small electronic part. It controls voltage. It keeps voltage steady at 7.5 volts. It protects other parts in a circuit from too much voltage. It comes in a SOD123 plastic package.

What is the voltage rating? Its main job is to hold voltage at 7.5 volts. This is its Zener voltage. It does this when voltage flows backwards through it correctly. This voltage is fixed. It doesn’t change much.

What power can it handle? It can safely handle up to 500 milliwatts of power. This is its power dissipation limit. Don’t exceed this. Too much power makes it overheat. It might get damaged. You need to limit the current flowing through it.

Where is it used? You find it in many small electronic devices. It protects sensitive parts. It provides a stable voltage reference. It’s good for power supplies. It works in battery chargers. It fits in portable gadgets. Its small SOD123 size helps save space.

Is it different from a regular diode? Yes. A regular diode blocks reverse current. This Zener diode allows reverse current at its specific voltage. It uses this to regulate voltage. Regular diodes don’t do this. Use this Zener when you need precise voltage control.

How should it be handled? Be careful with static electricity. Static can harm it. Use anti-static precautions. Follow standard soldering practices. Don’t use too much heat. Check the polarity when putting it on a circuit board. The cathode end is marked. Put it in the right way.

(MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123)