MMSZ5231B DIODE ZENER 5.1V 500MW SOD123

Introduction of MMSZ5231B DIODE ZENER 5.1V 500MW SOD123

The MMSZ5231B DIODE ZENER 5.1V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Ko ya sọtọ modulu, MMSZ5231B DIODE ZENER 5.1V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Yi oniru simplifies awọn Circuit be, din iye owo, ati ki o mu ṣiṣe.

 

Features and Benefits of MMSZ5231B DIODE ZENER 5.1V 500MW SOD123

Apẹrẹ iwapọ: Nitoripe ko si awọn paati ipinya afikun ti a nilo, MMSZ5231B DIODE ZENER 5.1V 500MW SOD123s are typically smaller and lighter in weight.

Ga išẹ: Idinku agbara ti o dinku nitori awọn paati ipinya ṣe ilọsiwaju ṣiṣe iyipada gbogbogbo.

Owo pooku: Gbowolori ipinya irinše ti wa ni imukuro, Abajade ni awọn idiyele iṣelọpọ kekere.

Idahun Yara: Diode Imularada Yara ti a ṣe sinu (FRD) le ni kiakia yipada lati ẹya on-ipinle to a ìdènà ipinle, idinku awọn adanu iyipada.

Gbẹkẹle giga: Awọn ohun elo to ti ni ilọsiwaju ati imọ-ẹrọ ni a lo lati rii daju iṣẹ iduroṣinṣin paapaa ni awọn agbegbe lile.

Rọrun lati fi sori ẹrọ ati ṣetọju: Awọn atọkun idiwon ati awọn asopọ jẹ ki ilana fifi sori ẹrọ rọrun ati dẹrọ itọju nigbamii.

(MMSZ5231B DIODE ZENER 5.1V 500MW SOD123)

Specification of MMSZ5231B DIODE ZENER 5.1V 500MW SOD123

The MMSZ5231B is a Zener diode. O fiofinsi foliteji. Its main job is keeping a steady 5.1 folti. This voltage is nominal. Actual voltage might vary slightly. Ifarada jẹ deede ± 5%. So actual voltage stays between 4.845V and 5.355V. It handles power well. Ipilẹ agbara ti o pọju jẹ 500 milliwatts. This rating applies at 25°C. Temperature affects this limit. Higher temperatures reduce the safe power level.

The diode comes in a SOD123 surface mount package. Apo yii jẹ kekere. O fi aaye pamọ sori awọn igbimọ Circuit. The compact size is good for modern electronics. Designers use it where space is tight. O ni awọn itọsọna meji. The cathode end is marked with a band. Correct orientation matters for installation.

It operates over a wide temperature range. The junction temperature can be from -65°C to +150°C. This makes it suitable for many environments. It functions reliably in different conditions. Electrical characteristics are measured at 25°C. Test conditions are important for specs.

The diode is useful for voltage regulation. It provides a stable reference voltage. Circuits need this for precision. It protects against voltage surges. It clamps voltages safely. It prevents damage to sensitive parts. O rii ni awọn ipese agbara. It stabilizes outputs. It guards inputs on integrated circuits. It manages transients in data lines. Its fast response time helps here. It works well in portable devices. Its small size and performance fit mobile applications. Engineers choose it for reliable clamping.

(MMSZ5231B DIODE ZENER 5.1V 500MW SOD123)

Applications of MMSZ5231B DIODE ZENER 5.1V 500MW SOD123

The MMSZ5231B diode is a Zener diode. O fiofinsi foliteji ni 5.1 folti. O mu soke si 500 milliwatts ti agbara. Its small SOD123 package saves space on circuit boards. This diode is useful in many electronic devices.

One main job is voltage regulation. It keeps voltage steady at 5.1V. Circuits needing a stable 5V reference use it. It protects sensitive parts from voltage spikes. If input voltage rises too high, the Zener diode activates. It clamps the voltage to 5.1V. Eyi ṣe idilọwọ ibajẹ.

Another use is protecting inputs and outputs. Microcontrollers often connect to sensors or other devices. Voltage spikes can harm these connections. Adding the MMSZ5231B across the input or output line adds safety. It absorbs harmful surges. This is common in communication ports or sensor interfaces. USB ports sometimes use similar protection.

Power supplies benefit from this Zener too. It acts as a simple shunt regulator. Low-power circuits needing a fixed 5.1V find it effective. It’s cheaper than complex regulator chips. Its small size is a big plus for compact designs. Think gadgets, wearables, or small modules.

Voltage clamping is another key task. Circuits might see unexpected high voltage. The Zener diode limits this voltage. It prevents signals from exceeding safe levels. This protects transistors or integrated circuits. It’s a basic safety component.

package SOD123 jẹ oke-oke. It’s easy for automated assembly. Designers like its small footprint. It fits tight spaces easily. Its 500mW power rating suits many common applications. It handles typical power needs without bulk. Devices needing reliable 5.1V regulation choose it. Its balance of size, cost, and performance works well. You find it in consumer electronics, automotive modules, ati awọn iṣakoso ile-iṣẹ. It protects logic circuits. It stabilizes reference points. It ensures voltage stays safe.

Ifihan ile ibi ise

PDDN Photoelectron Technology Co., Ltd., Ltd.(tita@pddn.com) jẹ ọkan ninu awọn ile-iṣẹ oludari ni imọ-ẹrọ itanna agbara ati awọn ọja agbara, eyi ti o ni kikun lowo ninu sese oorun inverters， Ayirapada, foliteji olutọsọna, awọn apoti ohun elo pinpin, thyristors， awọn modulu， diodes， awọn igbona, ati awọn ẹrọ itanna miiran tabi awọn semikondokito. A yoo ṣe ileri lati pese awọn olumulo pẹlu didara-giga, daradara awọn ọja ati o tiyẹ iṣẹ.

O gba owo sisan nipasẹ Kaadi Kirẹditi, T/T, West Union, ati PayPal. PDDN yoo gbe awọn ẹru naa ranṣẹ si awọn alabara okeokun nipasẹ FedEx, DHL, nipa okun, tabi nipasẹ afẹfẹ. If you want high-quality MMSZ5231B DIODE ZENER 5.1V 500MW SOD123, jọwọ fi wa ibeere; a yoo wa nibi lati ran ọ lọwọ.

 

Awọn ọna isanwo

L/C, T/T, Western Union, Paypal, Kaadi Kirẹditi ati bẹbẹ lọ.

 

Gbigbe

Nipa okun, nipa afẹfẹ, nipa kiakia, bi awọn onibara beere.

 

Awọn ipo ipamọ

1) Fipamọ ni agbegbe gbigbẹ ni iwọn otutu yara.

2) Yago fun ọririn ati iwọn otutu giga.

3) Lo lẹsẹkẹsẹ lẹhin ṣiṣi apo iṣakojọpọ inu.

5 FAQs of MMSZ5231B DIODE ZENER 5.1V 500MW SOD123

What is the MMSZ5231B Zener diode used for? This diode regulates voltage in circuits. It maintains a steady 5.1V output. It also protects components from voltage spikes. Common uses include power supplies and signal conditioning. It is reliable for basic regulation tasks.

What voltage does the MMSZ5231B provide? It operates at 5.1 folti. This specific voltage is key for many digital circuits. Tolerance is tight around this value. It ensures stable performance.

How much power can the MMSZ5231B handle? It dissipates up to 500 milliwatts. This power rating suits low-power applications. Designers must stay within this limit. Overloading risks damaging the diode.

What is the package type for the MMSZ5231B? It uses the SOD123 surface-mount package. This compact size saves board space. Two leads simplify soldering. It fits automated assembly processes well.

How does this diode protect electronic parts? It clamps voltage surges above 5.1V. Excess current flows through it harmlessly. This action shields sensitive components. It reacts quickly to overvoltage events.

(MMSZ5231B DIODE ZENER 5.1V 500MW SOD123)