MM1W8V2 DIODE ZENER 8.2V 1W SOD-123

Introduction of MM1W8V2 DIODE ZENER 8.2V 1W SOD-123

The MM1W8V2 DIODE ZENER 8.2V 1W SOD-123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Ko ya sọtọ modulu, MM1W8V2 DIODE ZENER 8.2V 1W SOD-123 does not use transformers or similar isolation components to separate inputs and outputs. Yi oniru simplifies awọn Circuit be, din iye owo, ati ki o mu ṣiṣe.

 

Features and Benefits of MM1W8V2 DIODE ZENER 8.2V 1W SOD-123

Apẹrẹ iwapọ: Nitoripe ko si awọn paati ipinya afikun ti a nilo, MM1W8V2 DIODE ZENER 8.2V 1W SOD-123s are typically smaller and lighter in weight.

Ga išẹ: Idinku agbara ti o dinku nitori awọn paati ipinya ṣe ilọsiwaju ṣiṣe iyipada gbogbogbo.

Owo pooku: Gbowolori ipinya irinše ti wa ni imukuro, Abajade ni awọn idiyele iṣelọpọ kekere.

Idahun Yara: Diode Imularada Yara ti a ṣe sinu (FRD) le ni kiakia yipada lati ẹya on-ipinle to a ìdènà ipinle, idinku awọn adanu iyipada.

Gbẹkẹle giga: Awọn ohun elo to ti ni ilọsiwaju ati imọ-ẹrọ ni a lo lati rii daju iṣẹ iduroṣinṣin paapaa ni awọn agbegbe lile.

Rọrun lati fi sori ẹrọ ati ṣetọju: Awọn atọkun idiwon ati awọn asopọ jẹ ki ilana fifi sori ẹrọ rọrun ati dẹrọ itọju nigbamii.

(MM1W8V2 DIODE ZENER 8.2V 1W SOD-123)

Specification of MM1W8V2 DIODE ZENER 8.2V 1W SOD-123

The MM1W8V2 is a Zener diode. Its main job is to regulate voltage. This diode provides a steady 8.2 folti. O mu soke si 1 watt ti agbara. The SOD-123 package keeps it small. This size makes it good for tight spaces on circuit boards.

You use this diode when you need a fixed voltage. It works well in voltage regulation circuits. It also protects against voltage spikes. When the voltage gets too high, this diode starts conducting. Yi igbese clamps awọn foliteji si isalẹ. It protects sensitive parts in your circuit.

The SOD-123 case is popular. It’s easy to solder. It doesn’t take up much board space. You get reliable performance from this package. It’s good for many different projects. This diode handles the 1-watt power level well. You need good heat management for this. The package helps with that.

Its voltage is 8.2 folti. There’s a small tolerance allowed. The exact voltage might be a bit higher or lower. Nigbagbogbo, it’s within 5%. Check the specific part for details. The temperature affects the voltage slightly. This effect is small and predictable.

You find this diode used in power supplies. It sets reference voltages. It protects inputs from overvoltage. It stabilizes voltage for ICs. Automotive electronics use parts like this. Consumer electronics use them too. It’s a common component for regulation. Its 8.2V rating is useful for many 5V or 3.3V systems. It provides a stable point above those levels.

(MM1W8V2 DIODE ZENER 8.2V 1W SOD-123)

Applications of MM1W8V2 DIODE ZENER 8.2V 1W SOD-123

The MM1W8V2 is a specific Zener diode. It is a voltage regulator component. This diode controls voltage levels in electronic circuits. It operates at a steady 8.2 folti. Its power rating is 1 watt. The SOD-123 package is small and surface-mountable. This makes it good for compact circuit boards.

One main use is voltage regulation. It keeps the voltage steady at 8.2 folti. Power supplies often need this. It protects sensitive parts from voltage changes. It handles voltage spikes effectively. It clamps the voltage to a safe level. This prevents damage to other components. Circuits get more reliable this way.

Another application is overvoltage protection. It acts as a safety device. If the voltage climbs too high, it activates. It diverts the excess voltage away. This shields delicate integrated circuits (ICs). Transistors and microchips stay safe. Power surges are a common threat. This diode helps manage them.

It also works well as a voltage reference. Some circuits need a precise voltage point. The 8.2V level is stable and known. It gives a reliable comparison voltage. Analog-to-digital converters (ADCs) use this. Voltage regulators may need it too. It provides a stable benchmark.

You find it in many power management jobs. Battery chargers need stable voltage. This diode helps achieve that. Switching power supplies use it for feedback. It ensures the output voltage stays correct. Automotive electronics face voltage swings. This component helps stabilize them.

It suits low-power applications best. Awọn 1 watt rating is adequate for many tasks. Its small size saves space on PCBs. Designers appreciate its efficiency. It offers good performance for its size. It is a common choice for 8.2V needs.

Ifihan ile ibi ise

PDDN Photoelectron Technology Co., Ltd., Ltd.(tita@pddn.com) jẹ ọkan ninu awọn ile-iṣẹ oludari ni imọ-ẹrọ itanna agbara ati awọn ọja agbara, eyi ti o ni kikun lowo ninu sese oorun inverters， Ayirapada, foliteji olutọsọna, awọn apoti ohun elo pinpin, thyristors， awọn modulu， diodes， awọn igbona, ati awọn ẹrọ itanna miiran tabi awọn semikondokito. A yoo ṣe ileri lati pese awọn olumulo pẹlu didara-giga, daradara awọn ọja ati o tiyẹ iṣẹ.

O gba owo sisan nipasẹ Kaadi Kirẹditi, T/T, West Union, ati PayPal. PDDN yoo gbe awọn ẹru naa ranṣẹ si awọn alabara okeokun nipasẹ FedEx, DHL, nipa okun, tabi nipasẹ afẹfẹ. If you want high-quality MM1W8V2 DIODE ZENER 8.2V 1W SOD-123, jọwọ fi wa ibeere; a yoo wa nibi lati ran ọ lọwọ.

 

Awọn ọna isanwo

L/C, T/T, Western Union, Paypal, Kaadi Kirẹditi ati bẹbẹ lọ.

 

Gbigbe

Nipa okun, nipa afẹfẹ, nipa kiakia, bi awọn onibara beere.

 

Awọn ipo ipamọ

1) Fipamọ ni agbegbe gbigbẹ ni iwọn otutu yara.

2) Yago fun ọririn ati iwọn otutu giga.

3) Lo lẹsẹkẹsẹ lẹhin ṣiṣi apo iṣakojọpọ inu.

5 FAQs of MM1W8V2 DIODE ZENER 8.2V 1W SOD-123

What is the MM1W8V2 diode?
The MM1W8V2 is a Zener diode. Zener diodes are special. They are made to work in the reverse breakdown region. This lets them keep a steady voltage. The MM1W8V2 provides an 8.2 Volt Zener voltage. It can handle up to 1 Watt of power. It comes in the small SOD-123 surface mount package. This makes it good for many circuits.

Kini idiyele foliteji?
The voltage rating is 8.2 Awọn folti. Eyi ni foliteji Zener. It is the voltage where the diode starts conducting heavily in reverse. The diode keeps the voltage steady at this 8.2V point. This is its main job. Check your circuit needs this specific voltage.

What does the 1W power rating mean?
The 1W rating shows how much power the diode can safely handle. Power is voltage times current. So for this 8.2V diode, the maximum safe current is about 122 milliamps. You calculate it by dividing 1 Watt by 8.2 Awọn folti. Do not exceed this power. Otherwise, the diode might overheat and fail.

What is the SOD-123 package?
SOD-123 is a small surface mount diode package. It is designed for automated assembly on circuit boards. The size is compact. This saves space on your PCB. You need proper soldering equipment to use it. Hand soldering is possible but needs care. Check the footprint matches your board design.

Where is this diode used?
This 8.2V Zener is used for voltage regulation. O aabo awọn iyika lati overvoltage. It can set reference voltages. O rii ni awọn ipese agbara. It stabilizes voltages in many electronic devices. Use it where you need a stable 8.2V point. It clamps voltage spikes too.

(MM1W8V2 DIODE ZENER 8.2V 1W SOD-123)