KDZVTR24B DIODE ZENER 25.8V 1W PMDU

Introduction of KDZVTR24B DIODE ZENER 25.8V 1W PMDU

The KDZVTR24B DIODE ZENER 25.8V 1W PMDU is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Ko ya sọtọ modulu, KDZVTR24B DIODE ZENER 25.8V 1W PMDU does not use transformers or similar isolation components to separate inputs and outputs. Yi oniru simplifies awọn Circuit be, din iye owo, ati ki o mu ṣiṣe.

 

Features and Benefits of KDZVTR24B DIODE ZENER 25.8V 1W PMDU

Apẹrẹ iwapọ: Nitoripe ko si awọn paati ipinya afikun ti a nilo, KDZVTR24B DIODE ZENER 25.8V 1W PMDUs are typically smaller and lighter in weight.

Ga išẹ: Idinku agbara ti o dinku nitori awọn paati ipinya ṣe ilọsiwaju ṣiṣe iyipada gbogbogbo.

Owo pooku: Gbowolori ipinya irinše ti wa ni imukuro, Abajade ni awọn idiyele iṣelọpọ kekere.

Idahun Yara: Diode Imularada Yara ti a ṣe sinu (FRD) le ni kiakia yipada lati ẹya on-ipinle to a ìdènà ipinle, idinku awọn adanu iyipada.

Gbẹkẹle giga: Awọn ohun elo to ti ni ilọsiwaju ati imọ-ẹrọ ni a lo lati rii daju iṣẹ iduroṣinṣin paapaa ni awọn agbegbe lile.

Rọrun lati fi sori ẹrọ ati ṣetọju: Awọn atọkun idiwon ati awọn asopọ jẹ ki ilana fifi sori ẹrọ rọrun ati dẹrọ itọju nigbamii.

(KDZVTR24B DIODE ZENER 25.8V 1W PMDU)

Specification of KDZVTR24B DIODE ZENER 25.8V 1W PMDU

This KDZVTR24B diode is a Zener diode. Awọn oniwe-akọkọ ise ni foliteji ilana. It keeps a steady voltage in electronic circuits. This specific diode has a Zener voltage of 25.8 folti. That is its breakdown voltage. It can handle up to 1 watt ti agbara. This power rating is important. It shows how much energy the diode can manage before getting too hot. The diode comes in a PMDU package. This is a surface-mount package. It is small. O fi aaye pamọ sori awọn igbimọ Circuit. The diode works well within a temperature range. This range is usually from -55°C to +150°C. This makes it reliable for many environments. The diode offers good voltage regulation stability. Its leakage current is low when not in breakdown. This helps circuit efficiency. The maximum Zener impedance is specified. This impedance is usually low at the nominal current. This ensures effective regulation. Engineers choose this diode for precise 25.8V reference points. It is also used for voltage clamping. It protects sensitive parts from voltage spikes. O rii ni awọn ipese agbara. It is common in voltage regulators. It works in protection circuits too. This KDZVTR24B provides a stable 25.8V reference. O mu 1 watt of power dissipation. Its PMDU package suits modern, compact designs. It is a dependable component for regulation tasks.

(KDZVTR24B DIODE ZENER 25.8V 1W PMDU)

Applications of KDZVTR24B DIODE ZENER 25.8V 1W PMDU

This KDZVTR24B is a Zener diode. O mu 25.8 folti ati 1 watt ti agbara. It comes in a PMDU package. This package is good for surface mounting on circuit boards. It helps save space.

Zener diodes work in reverse bias. They keep a steady voltage across themselves. This makes them very useful. The KDZVTR24B is often used for voltage regulation. It can hold a voltage steady at 25.8 folti. This protects sensitive parts in a circuit. It stops the voltage from going too high.

It is also good for clipping and clamping signals. This shapes waveforms. It protects circuits from voltage spikes or surges. Another common job is providing a reference voltage. Precision circuits need a stable point. This diode gives that reliable 25.8V reference. It helps other parts work correctly.

Its 1 watt power rating matters. It shows how much energy it can handle safely. Exceeding this wattage can damage the diode. Check the actual power dissipation in your circuit. The tolerance tells you how close the voltage is to 25.8V. A typical tolerance might be ±5%. This means the voltage could be between 24.51V and 27.09V. Temperature affects the Zener voltage too. The coefficient tells you how much it changes with heat or cold. This is important for stable performance.

You find this diode in power supplies. It regulates output voltage. It protects against overvoltage. Signal processing circuits use it too. It sets voltage levels or clips signals. Test equipment uses it as a precise reference. It is common in many electronic devices. This diode provides a simple, reliable voltage control solution. Its surface-mount PMDU package makes it easy to use.

Ifihan ile ibi ise

PDDN Photoelectron Technology Co., Ltd., Ltd.(tita@pddn.com) jẹ ọkan ninu awọn ile-iṣẹ oludari ni imọ-ẹrọ itanna agbara ati awọn ọja agbara, eyi ti o ni kikun lowo ninu sese oorun inverters， Ayirapada, foliteji olutọsọna, awọn apoti ohun elo pinpin, thyristors， awọn modulu， diodes， awọn igbona, ati awọn ẹrọ itanna miiran tabi awọn semikondokito. A yoo ṣe ileri lati pese awọn olumulo pẹlu didara-giga, daradara awọn ọja ati o tiyẹ iṣẹ.

O gba owo sisan nipasẹ Kaadi Kirẹditi, T/T, West Union, ati PayPal. PDDN yoo gbe awọn ẹru naa ranṣẹ si awọn alabara okeokun nipasẹ FedEx, DHL, nipa okun, tabi nipasẹ afẹfẹ. If you want high-quality KDZVTR24B DIODE ZENER 25.8V 1W PMDU, jọwọ fi wa ibeere; a yoo wa nibi lati ran ọ lọwọ.

 

Awọn ọna isanwo

L/C, T/T, Western Union, Paypal, Kaadi Kirẹditi ati bẹbẹ lọ.

 

Gbigbe

Nipa okun, nipa afẹfẹ, nipa kiakia, bi awọn onibara beere.

 

Awọn ipo ipamọ

1) Fipamọ ni agbegbe gbigbẹ ni iwọn otutu yara.

2) Yago fun ọririn ati iwọn otutu giga.

3) Lo lẹsẹkẹsẹ lẹhin ṣiṣi apo iṣakojọpọ inu.

5 FAQs of KDZVTR24B DIODE ZENER 25.8V 1W PMDU

What is the KDZVTR24B Zener diode used for? This diode provides stable voltage regulation. O ntọju ibakan 25.8 volts across it when reverse-biased. This protects sensitive circuits from overvoltage. It ensures other components get the right voltage level.

What are the key specifications of the KDZVTR24B? The nominal Zener voltage is 25.8 folti. It can handle a continuous power dissipation of 1 watt. Its PMDU package is compact. This diode suits various circuit board layouts. Its voltage tolerance is tight.

Where is this Zener diode commonly applied? You find it in voltage regulators. It stabilizes power supplies. It protects inputs on sensitive devices. It clamps voltage spikes in circuits. It serves as a voltage reference source.

How reliable is the KDZVTR24B diode? It is built for steady performance. Its design ensures consistent voltage regulation. It handles typical power levels well. Proper heat management is important. Using it within ratings ensures long life.

How does the KDZVTR24B compare to other diodes? Its specific voltage is 25.8V. The 1W power rating suits many common uses. The PMDU package is industry standard. It offers a good balance of size and capability. It is a standard choice for this voltage level.

(KDZVTR24B DIODE ZENER 25.8V 1W PMDU)