Focusable 3.2W 808nm 810nm Infrared Laser Diode Module

Introduction to Thyristor Diode Modules

Thyristor diode modules, often simply referred to as thyristors, are a type of semiconductor device used primarily for controlling and switching electrical power in various applications. They act as controlled switches, allowing current to flow when triggered by a small gate signal. Once turned on, they remain conducting until the current through them falls below a certain threshold or the direction of the current is reversed.

A thyristor module typically consists of multiple thyristors packaged together to handle higher currents or voltages than a single component could manage. These modules can be found in a variety of configurations, including SCR (Bộ chỉnh lưu điều khiển bằng silicon), TRIAC, and GTO (Gate Turn-Off) thyristor, each designed for specific types of power control tasks.

Features and Advantages of Thyristor Diode Modules

1. High Power Handling Capacity:
   Thyristor modules are capable of handling high levels of power, making them suitable for industrial applications that require robust and reliable power management solutions.

2. Efficient Power Control:
   Thyristors offer precise control over the power delivered to a load. By controlling the timing of the gate pulse, it’s possible to adjust the amount of power being transferred, which is particularly useful in AC power control applications such as dimming lights or speed control of motors.

3. Low Conduction Losses:
   When fully on, thyristors have low forward voltage drops, resulting in minimal power losses during conduction. This efficiency contributes to lower operating temperatures and improved energy efficiency.

4. Xây dựng chắc chắn:
   Designed for harsh environments, thyristor modules feature durable packaging that can withstand mechanical stress, temperature fluctuations, and other environmental factors typical in industrial settings.

5. Thiết kế nhỏ gọn:
   Despite their ability to handle significant power, modern thyristor modules are compact, enabling space-saving designs in equipment where size and weight are critical considerations.

6. Cost-Effective Solution:
   Thyristor modules provide an economical way to implement powerful switching and control functions compared to alternative technologies that might not be as efficient or may cost more per unit of power handled.

7. Simple Triggering Mechanism:
   Thyristors require only a small gate current to turn on, which simplifies the design of control circuits. The triggering mechanism can be easily integrated into existing systems with minimal additional components.

8. Wide Range of Applications:
   From motor control and power supplies to welding machines and traction systems, thyristor modules find application across a broad spectrum of industries due to their versatile characteristics.

9. Bảo vệ quá dòng:
   Many thyristor modules come equipped with built-in protection features against overcurrent conditions, safeguarding both the device itself and connected loads from potential damage.

10. Fast Switching Speeds:
    Advanced thyristor modules can switch states rapidly, which is beneficial in applications requiring quick response times or frequent switching cycles without compromising performance.

(Focusable 3.2W 808nm 810nm Infrared Laser Diode Module)

Specification of Focusable 3.2W 808nm 810nm Infrared Laser Diode Module

The Focusable 3.2 W 808nm 810nm Infrared Laser Diode Module supplies high-performance infrared outcome for accuracy applications. It runs at wavelengths of 808nm and 810nm, making it appropriate for medical, thuộc về thương mại, and clinical uses. The component offers a maximum result power of 3.2 W, making certain trusted performance popular environments. Its emphasis change feature enables users to regulate the beam spot dimension, allowing modification for details tasks. The style includes a collimated lens system for constant light beam top quality.

The module is built with a sturdy aluminum alloy housing, enhancing heat dissipation and extending operational life. It sustains constant and pulsed procedure modes, providing flexibility for various circumstances. The integrated vehicle driver circuit makes sure secure present supply, lowering power fluctuations. Security functions include overload defense and temperature monitoring to avoid damage from extreme use.

Power input demands are 5V DC, suitable with basic power sources. The component has a small style, gauging 40mm in size and 12mm in size, making it easy to integrate into existing systems. Operating temperature level ranges from -10 ° C đến 40 ° C, making certain capability in different problems. Storage temperature varies from -20 ° C đến 60 ° C, shielding the gadget during non-use.

The laser diode releases infrared light undetectable to the human eye, needing care throughout operation. Individuals need to wear ideal protective equipment to avoid accidental exposure. The component includes a threaded base for safe mounting, minimizing alignment concerns. Connections are made by means of a 3-pin user interface, đơn giản hóa việc cài đặt.

Applications consist of laser therapy, material handling, and optical testing. The flexible focus enables precise targeting in clinical treatments or inscribing tasks. Industrial individuals benefit from its reliability in noting or cutting procedures. Researchers utilize it for experiments needing controlled infrared source of lights.

Conformity with international security requirements makes certain top quality and individual defense. The component is checked for performance uniformity under extended operation. Upkeep includes routine cleaning of the lens surface area to preserve light beam quality. No additional cooling systems are required under typical conditions.

The style focuses on easy to use procedure while keeping technical precision. Its mix of power, adjustability, and resilience makes it a sensible option for specialists. Technical support is readily available for troubleshooting or modification requests. Compatibility with common laser control systems permits seamless assimilation right into operations.

(Focusable 3.2W 808nm 810nm Infrared Laser Diode Module)

Applications of Focusable 3.2W 808nm 810nm Infrared Laser Diode Module

The Focusable 3.2 W 808nm 810nm Infrared Laser Diode Module is a high-performance device created for accuracy jobs throughout several sectors. Its adjustable focus and stable output make it suitable for applications calling for controlled infrared light. The wavelengths 808nm and 810nm are near-infrared, excellent for scenarios where deep penetration or minimal exposure is needed.

In medical areas, this component is used for treatments like soft tissue surgical treatment and dermatology. The 808nm wavelength is soaked up well by hemoglobin and water in tissues, making it possible for efficient cutting or coagulation. Physicians depend on its accuracy for minimally invasive procedures. It also supports photobiomodulation treatment, promoting cell repair and reducing inflammation.

Industrial setups gain from the component’s power for cutting, welding, and engraving products like plastics and metals. The emphasis adjustment enables operators to adapt light beam strength for different jobs. It works in automated systems for noting product codes or developing thorough patterns. Manufacturing facilities utilize it for quality assurance, inspecting products with infrared imaging.

Scientific research study employs the component in spectroscopy and research laboratory experiments. Its stable outcome aids in examining molecular structures or examining material homes. Universities and laboratories integrate it right into optical setups for information collection. The near-infrared array serves for low-light imaging or tracking chain reaction.

Safety and security and security systems utilize the module for nighttime lighting. The unnoticeable infrared light pairs with video cameras to catch clear video in darkness. It is used in boundary surveillance or wildlife monitoring. The beam of light can be adjusted to cover broad areas or focus on specific targets.

Enthusiasts and tech designers include the component into custom tasks like robotics or do it yourself laser systems. Its small dimension and resilience make it versatile for prototypes. Customers appreciate the equilibrium of power and control.

The module’s layout ensures heat administration, preventing overheating throughout expanded usage. Safety and security functions include defense against power rises. It works with standard power materials and installing configurations. Bảo trì rất đơn giản, calling for basic cleaning and occasional calibration.

Industries choose this laser diode for dependability and versatility. It fulfills needs for precision and efficiency in expert settings. The modern technology behind it advances continuously, maintaining it relevant for emerging applications.

Hồ sơ công ty

Công ty TNHH Công nghệ Năng lượng Lạc Dương Datang(sales@pddn.com) là một trong những doanh nghiệp hàng đầu về công nghệ điện tử công suất và các sản phẩm điện, tham gia đầy đủ vào việc phát triển bộ biến tần năng lượng mặt trời， máy biến áp, bộ điều chỉnh điện áp, tủ phân phối, thyristor， mô-đun， điốt， máy sưởi, và các thiết bị điện tử hoặc chất bán dẫn khác. Chúng tôi sẽ cam kết cung cấp cho người dùng chất lượng cao, sản phẩm hiệu quả và dịch vụ chu đáo.

Nó chấp nhận thanh toán qua thẻ tín dụng, T/T, Tây Liên, và Paypal. PDDN sẽ vận chuyển hàng hóa tới khách hàng nước ngoài thông qua FedEx, DHL, bằng đường biển, hoặc bằng đường hàng không. If you want high-quality Focusable 3.2W 808nm 810nm Infrared Laser Diode Module, xin vui lòng gửi cho chúng tôi yêu cầu; chúng tôi sẽ ở đây để giúp bạn.

Phương thức thanh toán

L/C, T/T, Công Đoàn Phương Tây, Paypal, Thẻ tín dụng vv.

Lô hàng

Bằng đường biển, bằng đường hàng không, bằng cách thể hiện, như khách hàng yêu cầu.

Điều kiện bảo quản

1) Bảo quản ở môi trường khô ráo ở nhiệt độ phòng.

2) Tránh ẩm ướt và nhiệt độ cao.

3) Sử dụng ngay sau khi mở túi đóng gói bên trong.

5 FAQs of Focusable 3.2W 808nm 810nm Infrared Laser Diode Module

The Focusable 3.2W 808nm 810nm Infrared Laser Diode Module is built for precision tasks. It supports medical treatments, industrial cutting, and scientific research. The adjustable focus allows users to control beam intensity. This flexibility suits jobs needing accuracy over different distances.

People often ask what safety features the module has. It includes protective housings to prevent accidental exposure. Safety interlocks cut power if the housing opens. Users must wear infrared-protective goggles. These measures reduce risks during operation.

Questions about customization are common. Parameters like focus settings, power levels, and cooling methods can be tailored. Custom orders require specific details about the application. This ensures the module meets exact project needs.

Maintenance requirements are simple. Regularly clean the lens with a microfiber cloth. Check electrical connections for wear. Avoid running the module beyond its duty cycle. Proper care extends its lifespan.

Technical support is available for setup or troubleshooting. The supplier provides manuals and video guides. Direct contact options include email and phone. Support teams help diagnose issues like power fluctuations or beam misalignment. Replacement parts are shipped quickly if needed.

(Focusable 3.2W 808nm 810nm Infrared Laser Diode Module)