MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

Introduction of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Hindi tulad ng mga nakahiwalay na module, MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Pinapasimple ng disenyo na ito ang istraktura ng circuit, binabawasan ang gastos, at nagpapabuti ng kahusayan.

 

Features and Benefits of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

Compact na disenyo: Dahil walang karagdagang isolation component ang kailangan, MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123s are typically smaller and lighter in weight.

Mataas na pagganap: Ang pinababang pagkawala ng enerhiya dahil sa mga bahagi ng paghihiwalay ay nagpapabuti sa pangkalahatang kahusayan ng conversion.

Mababang Gastos: Ang mga mamahaling bahagi ng paghihiwalay ay inalis, na nagreresulta sa mas mababang gastos sa pagmamanupaktura.

Mabilis na Tugon: Ang built-in na Fast Recovery Diode (FRD) maaaring mabilis na lumipat mula sa isang nasa estado patungo sa isang estado ng pagharang, pagbabawas ng mga pagkalugi sa paglipat.

Mataas na Maaasahan: Ang mga advanced na materyales at teknolohiya ay ginagamit upang matiyak ang matatag na operasyon kahit na sa malupit na kapaligiran.

Madaling i-install at mapanatili: Pinapasimple ng mga standardized na interface at koneksyon ang proseso ng pag-install at pinapadali ang pagpapanatili sa ibang pagkakataon.

(MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123)

Specification of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ7V5ET1 is a Zener diode. It offers voltage regulation at 7.5 volts. This component takes care of up to 500 milliwatt ng kapangyarihan. It makes use of the tiny SOD123 surface-mount package. This size conserves space on modern-day motherboard. The SOD123 style is common and simple to position automatically.

Its key work is keeping a secure 7.5 V recommendation voltage. It does this in reverse prejudice procedure. The voltage tolerance is limited. The nominal Zener voltage (Vz) is 7.5 V. The real voltage gauged at the test current (Izt) of 5mA falls between 7.13 V and 7.87 V. This accuracy is essential for reliable circuits.

The diode handles an optimal reverse present (Ir) of 100 nanoamps. This reduced leak existing takes place at 4 volts reverse bias. The optimum Zener insusceptibility (Zzt) is 20 ohms. This impedance is measured at the test current of 5mA. A reduced insusceptibility frequently indicates much better voltage law under changing tons conditions.

The optimal power dissipation (Ptot) is 500mW. This rating is vital for style. Exceeding it harms the diode. The operating temperature level variety is vast. It functions from -65 ° C hanggang +150 ° C. This makes it ideal for numerous settings. The diode is unidirectional. It conducts present openly in the forward instructions like a standard diode. In reverse bias, it regulates voltage once break down takes place.

Regular uses include voltage clamping. It safeguards sensitive inputs from overvoltage spikes. It functions well as a simple voltage reference. Designers utilize it for waveform shaping. It discovers functions in power supplies and signal conditioning circuits. Its small size and reliable efficiency make it popular. The MMSZ7V5ET1 offers an affordable option for 7.5 V policy requirements. Constantly inspect the datasheet for absolute maximum scores. Make sure appropriate warm dissipation in your design.

(MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123)

Applications of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ7V5ET1 is a 7.5 V Zener diode. It takes care of 500mW power. Its tiny SOD123 bundle fits limited spaces. This diode controls voltage specifically. You can utilize it in numerous circuits.

One primary work is voltage regulation. It maintains a stable 7.5 V output. Position it across a power supply. It clamps the voltage at 7.5 V. This shields delicate parts downstream. It stops voltage spikes. It prevents over-voltage damage. It’s good for protecting inputs on ICs or sensing units. It absorbs unexpected rises quickly.

It also helps signal securing. It quits signals going too expensive. It clips waveforms over 7.5 V. This is useful in audio circuits. It safeguards analog-to-digital converters. It makes sure signals remain within secure restrictions.

Another usage is offering a steady recommendation voltage. You need a known voltage point. This diode gives a set 7.5 V reference. Use it in power supplies. Utilize it in voltage monitors. It aids compare other voltages accurately.

Its little size aids in mobile gadgets. Believe phones, tablet computers, wearables. It fits on crowded circuit card. It saves room. It does not add much weight.

It defends against electrostatic discharge. ESD can fry electronics. This diode diverts the rise harmlessly. Place it near ports. Position it on information lines. It guards ports like USB.

You see it in power management circuits. It stabilizes prejudice factors. It protects low-power microcontrollers. It protects communication lines like I2C or SPI. It makes sure secure operation.

It’s dependable for basic tasks. It’s cost-effective. Its specifications are distinct. It carries out constantly. Engineers trust it for simple security. It uses a solid service without intricacy. It satisfies typical style requirements.

Profile ng Kumpanya

Ang PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) ay isa sa mga nangungunang negosyo sa power electronics technology at power products, na ganap na kasangkot sa pagbuo ng mga solar inverters， mga transformer, mga regulator ng boltahe, mga kabinet ng pamamahagi, thyristors， mga module， mga diode， mga pampainit, at iba pang mga elektronikong kagamitan o semiconductor. Kami ay magiging nakatuon sa pagbibigay sa mga user ng mataas na kalidad, mahusay na mga produkto at mapagbigay na serbisyo.

Tumatanggap ito ng bayad sa pamamagitan ng Credit Card, T/T, West Union, at Paypal. Ipapadala ng PDDN ang mga kalakal sa mga customer sa ibang bansa sa pamamagitan ng FedEx, DHL, sa pamamagitan ng dagat, o sa pamamagitan ng hangin. If you want high-quality MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123, mangyaring magpadala sa amin ng mga katanungan; nandito kami para tulungan ka.

 

Mga Paraan ng Pagbabayad

L/C, T/T, Western Union, Paypal, Credit Card atbp.

 

Pagpapadala

Sa pamamagitan ng dagat, sa pamamagitan ng hangin, sa pamamagitan ng express, bilang kahilingan ng mga customer.

 

Mga Kondisyon sa Imbakan

1) Mag-imbak sa isang tuyo na kapaligiran sa temperatura ng silid.

2) Iwasan ang basa at mataas na temperatura.

3) Gamitin kaagad pagkatapos buksan ang panloob na packing bag.

5 FAQs of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

What is the MMSZ7V5ET1?
This is a Zener diode. It regulates voltage. Its main job is maintaining a steady 7.5 volts across its terminals. You use it in circuits needing stable voltage.

What does it do?
The diode lets current flow backwards once voltage hits 7.5 volts. Ito “breakdown” keeps the voltage at 7.5V. It protects sensitive parts from voltage spikes. It gives a stable reference voltage.

Key specifications?
Its voltage is 7.5 volts. Its power rating is 500 milliwatts. It comes in a tiny SOD123 surface-mount package. This saves space on circuit boards. Its tolerance is usually ±5%.

Where is it used?
Find it protecting inputs on ICs or microcontrollers. It clamps voltage surges. It provides a simple voltage reference. It stabilizes voltage in low-power supplies. It is common in many electronic devices.

How is it different from a regular diode?
Regular diodes block reverse current. This Zener diode conducts reverse current at 7.5V. Regular diodes are for rectification. This Zener is for voltage regulation and protection.

(MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123)