MMSZ5237B DIODE ZENER 8.2V 500MW SOD123

Introduction of MMSZ5237B DIODE ZENER 8.2V 500MW SOD123

The MMSZ5237B DIODE ZENER 8.2V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Hindi tulad ng mga nakahiwalay na module, MMSZ5237B DIODE ZENER 8.2V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Pinapasimple ng disenyo na ito ang istraktura ng circuit, binabawasan ang gastos, at nagpapabuti ng kahusayan.

 

Features and Benefits of MMSZ5237B DIODE ZENER 8.2V 500MW SOD123

Compact na disenyo: Dahil walang karagdagang isolation component ang kailangan, MMSZ5237B DIODE ZENER 8.2V 500MW SOD123s are typically smaller and lighter in weight.

Mataas na pagganap: Ang pinababang pagkawala ng enerhiya dahil sa mga bahagi ng paghihiwalay ay nagpapabuti sa pangkalahatang kahusayan ng conversion.

Mababang Gastos: Ang mga mamahaling bahagi ng paghihiwalay ay inalis, na nagreresulta sa mas mababang gastos sa pagmamanupaktura.

Mabilis na Tugon: Ang built-in na Fast Recovery Diode (FRD) maaaring mabilis na lumipat mula sa isang nasa estado patungo sa isang estado ng pagharang, pagbabawas ng mga pagkalugi sa paglipat.

Mataas na Maaasahan: Ang mga advanced na materyales at teknolohiya ay ginagamit upang matiyak ang matatag na operasyon kahit na sa malupit na kapaligiran.

Madaling i-install at mapanatili: Pinapasimple ng mga standardized na interface at koneksyon ang proseso ng pag-install at pinapadali ang pagpapanatili sa ibang pagkakataon.

(MMSZ5237B DIODE ZENER 8.2V 500MW SOD123)

Specification of MMSZ5237B DIODE ZENER 8.2V 500MW SOD123

This diode is the MMSZ5237B. Ito ay isang Zener diode. Its primary work is voltage policy. It keeps a stable voltage of 8.2 volts. This occurs when it operates in reverse failure. Hinahawakan nito hanggang sa 500 milliwatt ng kapangyarihan. This power rating is critical. It informs you just how much power the diode can securely dissipate. The plan kind is SOD-123. This is a very little surface-mount bundle. It conserves space on motherboard. It’s common for contemporary electronics.

The nominal Zener voltage is 8.2 V. But remember, actual voltage varies slightly. Ang pagpapaubaya ay ± 5%. So the real voltage might be in between 7.79 V at 8.61 V. You need to know this for precise designs. The diode handles a maximum reverse current. This existing is defined at the examination voltage. The test voltage is usually higher than 8.2 V. Check the datasheet for exact values. There’s likewise an optimum Zener insusceptibility. This resistance is measured at a particular test current. A reduced insusceptibility is normally much better. It indicates the diode manages voltage better.

This diode benefits protecting delicate components. It secures voltage spikes. It avoids damages from overvoltage. It’s typically used in power supplies. It provides a stable referral voltage. You see it in customer electronic devices. It’s utilized in communication devices. It fits auto applications also. Its tiny size makes it versatile. It works well in battery-powered gadgets. It aids manage power effectively.

Always think about the operating temperature level. The power ranking relies on temperature. The diode derates over 25 ° C. This suggests its power handling drops as it obtains hotter. You need to make up this in your design. Installing matters. Make sure good thermal administration. The SOD-123 plan has thermal restrictions. Don’t surpass the joint temperature level. Inspect the optimum onward voltage too. This is essential if the diode sees onward bias. It’s usually around 1V at reduced currents. Leak current is little in ahead prejudice. However it exists. Know the reverse leak specs. It’s generally very reduced listed below the break down factor.

(MMSZ5237B DIODE ZENER 8.2V 500MW SOD123)

Applications of MMSZ5237B DIODE ZENER 8.2V 500MW SOD123

The MMSZ5237B is a Zener diode. It controls voltage at 8.2 volts. It manages as much as 500 milliwatt ng kapangyarihan. It comes in a small SOD123 bundle. This size is good for conserving space on motherboard. This diode works in several electronic circuits.

One primary job is voltage guideline. Ito ay nagpapanatili ng isang pare-pareho 8.2 volts throughout its terminals. It does this also if the input voltage transforms a little. It functions by performing added present when the voltage gets too high. This activity clamps the voltage down. It secures sensitive parts downstream. Makikita mo ito sa mga produktong pang-kapangyarihan. It provides a stable reduced voltage factor.

Another key use is overvoltage security. Voltage spikes can damage circuits. This diode assists stop that. It attaches between the signal line and ground. Karaniwan, it does nothing. If a spike presses the voltage above 8.2 volts, the diode performs. It shunts the unsafe spike to ground. This shields various other parts. It prevails on input or outcome lines.

It also offers well as a voltage referral. Some circuits need an exact voltage to contrast against. Ang 8.2 V level from this diode is stable. Circuits utilize this steady factor for measurements. It works in analog-to-digital converters. It operates in sensing unit interfaces. It functions where accuracy matters.

The 500mW power score is important. It implies the diode can deal with an affordable quantity of present. The SOD123 plan is easy to position on boards. It deals with conventional soldering processes. This makes it useful for lots of styles. Engineers select it for its dependability and dimension. It is a great selection for setting 8.2 V.

Profile ng Kumpanya

Ang PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) ay isa sa mga nangungunang negosyo sa power electronics technology at power products, na ganap na kasangkot sa pagbuo ng mga solar inverters， mga transformer, mga regulator ng boltahe, mga kabinet ng pamamahagi, thyristors， mga module， mga diode， mga pampainit, at iba pang mga elektronikong kagamitan o semiconductor. Kami ay magiging nakatuon sa pagbibigay sa mga user ng mataas na kalidad, mahusay na mga produkto at mapagbigay na serbisyo.

Tumatanggap ito ng bayad sa pamamagitan ng Credit Card, T/T, West Union, at Paypal. Ipapadala ng PDDN ang mga kalakal sa mga customer sa ibang bansa sa pamamagitan ng FedEx, DHL, sa pamamagitan ng dagat, o sa pamamagitan ng hangin. If you want high-quality MMSZ5237B DIODE ZENER 8.2V 500MW SOD123, mangyaring magpadala sa amin ng mga katanungan; nandito kami para tulungan ka.

 

Mga Paraan ng Pagbabayad

L/C, T/T, Western Union, Paypal, Credit Card atbp.

 

Pagpapadala

Sa pamamagitan ng dagat, sa pamamagitan ng hangin, sa pamamagitan ng express, bilang kahilingan ng mga customer.

 

Mga Kondisyon sa Imbakan

1) Mag-imbak sa isang tuyo na kapaligiran sa temperatura ng silid.

2) Iwasan ang basa at mataas na temperatura.

3) Gamitin kaagad pagkatapos buksan ang panloob na packing bag.

5 FAQs of MMSZ5237B DIODE ZENER 8.2V 500MW SOD123

What is the voltage rating of the MMSZ5237B diode?
This diode is an 8.2V Zener diode. That means its designed voltage is 8.2 volts. Ang boltahe na ito ay tinatawag na boltahe ng Zener. It’s the key point where the diode starts regulating voltage.

How much power can the MMSZ5237B handle?
The diode can handle up to 500 milliwatt ng kapangyarihan. This is its maximum power dissipation. Hindi ka dapat lumampas sa limitasyong ito. Exceeding it risks damaging the diode. Good heat management helps it stay within this limit.

What package does the MMSZ5237B diode use?
Ito ay nasa SOD123 surface-mount package. Napakaliit ng paketeng ito. Its size makes it good for compact circuit boards. The small size saves space on your PCB layout.

Where is the MMSZ5237B diode typically used?
This diode is mainly used for voltage regulation. It holds a steady 8.2V in a circuit. Pinoprotektahan nito ang mga sensitibong bahagi mula sa mga spike ng boltahe. You find it protecting inputs or outputs. It’s common in power supplies and signal lines.

Does polarity matter when installing the MMSZ5237B?
Oo, ang polarity ay kritikal. Zener diodes are polarized parts. The cathode end must connect correctly. The cathode is marked with a stripe. Installing it backwards prevents it from working right. It might even cause circuit problems. Always check the stripe orientation.

(MMSZ5237B DIODE ZENER 8.2V 500MW SOD123)