MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

Introduction of MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

The MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Hindi tulad ng mga nakahiwalay na module, MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Pinapasimple ng disenyo na ito ang istraktura ng circuit, binabawasan ang gastos, at nagpapabuti ng kahusayan.

 

Features and Benefits of MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

Compact na disenyo: Dahil walang karagdagang isolation component ang kailangan, MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123s are typically smaller and lighter in weight.

Mataas na pagganap: Ang pinababang pagkawala ng enerhiya dahil sa mga bahagi ng paghihiwalay ay nagpapabuti sa pangkalahatang kahusayan ng conversion.

Mababang Gastos: Ang mga mamahaling bahagi ng paghihiwalay ay inalis, na nagreresulta sa mas mababang gastos sa pagmamanupaktura.

Mabilis na Tugon: Ang built-in na Fast Recovery Diode (FRD) maaaring mabilis na lumipat mula sa isang nasa estado patungo sa isang estado ng pagharang, pagbabawas ng mga pagkalugi sa paglipat.

Mataas na Maaasahan: Ang mga advanced na materyales at teknolohiya ay ginagamit upang matiyak ang matatag na operasyon kahit na sa malupit na kapaligiran.

Madaling i-install at mapanatili: Pinapasimple ng mga standardized na interface at koneksyon ang proseso ng pag-install at pinapadali ang pagpapanatili sa ibang pagkakataon.

(MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123)

Specification of MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

The MMSZ5221ET1 is a Zener diode. It provides a secure referral voltage. This diode is ranked for 2.4 volts. This voltage is its nominal Zener voltage. The actual voltage has a resistance. It can be plus or minus 5%. So the genuine voltage ranges between 2.28 volts at 2.52 volts. This precision is essential for accurate circuits.

The diode deals with an optimal power dissipation of 500 milliwatts. This is the power it can safely take in. You must not exceed this restriction. Surpassing it risks harming the part. The SOD123 surface install bundle houses this diode. This plan is extremely small. It conserves considerable room on circuit card. The SOD123 is prominent for modern electronic devices assembly. It is developed for effective automatic positioning.

This Zener diode is suitable for voltage regulation. It secures voltage spikes efficiently. It safeguards sensitive elements from overvoltage. You typically discover it shielding inputs on integrated circuits. It likewise supplies steady bias factors in analog circuits. The component functions well in power supplies. It maintains reduced voltage rails reliably. The MMSZ5221ET1 suits consumer electronics applications. It prevails in mobile gadgets. Industrial control systems likewise use this part.

Its operating temperature array is broad. It operates from -65 levels Celsius to +150 levels Celsius. This makes it robust for various environments. The diode features low leak current. This characteristic improves circuit efficiency. Excellent thermal performance comes from the SOD123 package. This assists manage warmth during operation. The MMSZ5221ET1 uses dependable performance. It is a common choice for 2.4 V guideline needs. Designers trust it for regular outcomes.

(MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123)

Applications of MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

The MMSZ5221ET1 is a Zener diode. It provides a consistent 2.4 V voltage referral. This details part is available in the small SOD123 surface-mount package. Its small size fits well in modern, small electronic devices. The diode deals with as much as 500 milliwatts (mW) of power dissipation. This score is very important for its risk-free operation.

This diode works generally for voltage policy. It keeps a steady voltage throughout its terminals. When the voltage tries to exceed 2.4 V, the diode carries out heavily. This activity secures the voltage close to 2.4 V. So it shields delicate parts downstream from voltage spikes.

You discover it protecting low-voltage circuits. It’s common protecting inputs on microcontrollers or sensing units. These components typically need protection from unexpected voltage surges. Ang 2.4 V degree suits many low-power reasoning circuits. It secures interfaces like low-voltage serial lines.

Another vital usage is as a basic voltage reference. Circuits requiring an accurate 2.4 V factor use this diode. It offers a secure recommendation voltage. This serves in fundamental power products or sensor circuits. It supplies a low-cost method to obtain a known voltage degree.

Its SOD123 package is very popular. This makes assembly very easy using standard pick-and-place makers. The tiny impact saves important board area. Developers select it for thick circuit formats. Its efficiency is dependable for general-purpose jobs.

The diode has a tolerance of ± 5%. So the actual failure voltage varies in between 2.28 V and 2.52 V. Designers have to make up this range. Its efficiency modifications a little with temperature level. This is typical for Zener diodes. Circuits needing high precision might require extra parts.

It works for securing voltage transients. Consider occasions like electrostatic discharge (ESD). The diode promptly limits the voltage to its secure level. This avoids damages to extra costly ICs. It’s a standard foundation for circuit defense.

This diode is widely offered. It’s an affordable option for lots of styles. Its combination of 2.4 V ranking, 500mW power, and small dimension makes it flexible. It works well in battery-powered gizmos. It’s additionally found in USB peripherals and portable devices. Designers trust it for simple voltage control tasks.

Profile ng Kumpanya

Ang PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) ay isa sa mga nangungunang negosyo sa power electronics technology at power products, na ganap na kasangkot sa pagbuo ng mga solar inverters， mga transformer, mga regulator ng boltahe, mga kabinet ng pamamahagi, thyristors， mga module， mga diode， mga pampainit, at iba pang mga elektronikong kagamitan o semiconductor. Kami ay magiging nakatuon sa pagbibigay sa mga user ng mataas na kalidad, mahusay na mga produkto at mapagbigay na serbisyo.

Tumatanggap ito ng bayad sa pamamagitan ng Credit Card, T/T, West Union, at Paypal. Ipapadala ng PDDN ang mga kalakal sa mga customer sa ibang bansa sa pamamagitan ng FedEx, DHL, sa pamamagitan ng dagat, o sa pamamagitan ng hangin. If you want high-quality MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123, mangyaring magpadala sa amin ng mga katanungan; nandito kami para tulungan ka.

 

Mga Paraan ng Pagbabayad

L/C, T/T, Western Union, Paypal, Credit Card atbp.

 

Pagpapadala

Sa pamamagitan ng dagat, sa pamamagitan ng hangin, sa pamamagitan ng express, bilang kahilingan ng mga customer.

 

Mga Kondisyon sa Imbakan

1) Mag-imbak sa isang tuyo na kapaligiran sa temperatura ng silid.

2) Iwasan ang basa at mataas na temperatura.

3) Gamitin kaagad pagkatapos buksan ang panloob na packing bag.

5 FAQs of MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

What is the MMSZ5221ET1?
It’s a Zener diode. It regulates voltage in circuits. It keeps voltage steady at a specific point. This diode is surface-mount. You find it in small electronic devices.

What voltage does it regulate?
It regulates at 2.4 volts. This is its Zener voltage. If voltage tries to go above 2.4V, the diode conducts. It clamps the voltage down to 2.4V. This protects sensitive parts.

How much power can it handle?
Kakayanin nito 500 milliwatts (0.5 watts). This is its maximum power dissipation. Don’t exceed this limit. Too much power will damage the diode. Check the current flowing through it.

What package does it use?
It comes in an SOD-123 surface mount package. This package is small. It saves space on circuit boards. You solder it directly onto the PCB. It’s common for automated assembly.

Where is this diode typically used?
It’s used for voltage regulation. It provides a stable 2.4V reference. It protects circuits from overvoltage. Common uses include protecting inputs on microcontrollers. It’s also used in power supplies.

(MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123)