Factory 10/100M unmanaged mini POE switch 6 port for cctv

Muhtasari wa Swichi za AC za Msururu wa W

Swichi za W Series AC ni vifaa vya hali ya juu vya kubadilisha hali dhabiti vilivyoundwa kwa udhibiti mzuri na wa kutegemewa wa mkondo wa mkondo. (AC) mizigo. Swichi hizi hutoa mchanganyiko wa utendaji wa juu, muundo wa kompakt, na urahisi wa kuunganishwa katika mifumo mbalimbali ya umeme. Zimeundwa kushughulikia viwango muhimu vya nishati huku zikipunguza uzalishaji wa joto na mwingiliano wa sumakuumeme (EMI). Mfululizo wa W unafaa kwa programu zinazohitaji udhibiti sahihi na wa haraka wa nishati ya AC, kama vile mitambo ya viwandani, udhibiti wa taa, mifumo ya joto, na anatoa motor.

Vipengele vya Swichi za AC za Msururu wa W

1. Uwezo wa Juu wa Sasa: Imeundwa kudhibiti upakiaji wa AC ya nguvu ya juu, kuhakikisha utendaji thabiti katika mazingira yenye mahitaji.
2. Upungufu wa Nguvu ya Chini: Utaratibu wa kubadili ufanisi hupunguza matumizi ya nishati na gharama za uendeshaji.
3. Ukubwa wa Compact: Ubunifu wa kuokoa nafasi hurahisisha usakinishaji na ujumuishaji katika mifumo iliyopo.
4. Kasi ya Kubadilisha Haraka: Huwasha nyakati za majibu ya haraka, bora kwa programu zinazohitaji mizunguko ya kuwasha/kuzima haraka.
5. Utambuzi wa Kuvuka Sifuri: Hupunguza EMI kwa kuwasha au kuzima swichi kwenye sehemu za kuvuka volteji sifuri.
6. Ulinzi wa Kupakia kupita kiasi: Mbinu za ulinzi zilizojengewa ndani hulinda dhidi ya hali ya overcurrent na ya joto kupita kiasi.
7. Kiwango Kina cha Halijoto cha Uendeshaji: Utendaji thabiti katika wigo mpana wa halijoto, kuimarisha kuegemea.
8. Muda mrefu wa Maisha: Ujenzi wa kudumu huhakikisha uendeshaji wa muda mrefu bila matengenezo ya mara kwa mara.
9. Kiolesura Inayofaa Mtumiaji: Miingiliano rahisi ya udhibiti hufanya usanidi na utendakazi kuwa moja kwa moja.

(Factory 10/100M unmanaged mini POE switch 6 port for cctv)

Specification of Factory 10/100M unmanaged mini POE switch 6 port for cctv

This 10/100M unmanaged mini POE button is developed for CCTV systems. It makes adding power and network connections easy. The button has six ports. Four ports supply Power over Ethernet (POE). You attach electronic cameras straight to these POE ports. This sends both information and power over one cable. You prevent messy power adapters near each camera. The remaining 2 ports are typical Ethernet ports. Utilize them for attaching non-POE devices. Connect a network video clip recorder (NVR) below. Link one more network device if required. All ports support 10Mbps or 100Mbps speeds. This is excellent for basic IP electronic camera feeds.

The switch is really tiny. Its compact layout saves room. Install it easily inside a closet or near your cameras. Installing it is straightforward. Plugging in your devices is simple. No complicated software configuration is required. This is an unmanaged switch. It works automatically appropriate out of package. Plug in your cams and NVR. The button takes care of the links quickly. It supplies reputable power to your POE cameras. Constant power is crucial for safety systems. Electronic cameras remain online without disruption.

The built-in power supply is inner. You just require one power cord for the entire button. This minimizes mess further. The button utilizes IEEE 802.3 af conventional POE. It delivers up to 15.4 watts per POE port. This power degree collaborates with many typical POE safety cameras. The complete power spending plan is 60 wati. This sustains powering 4 cams at the same time. The switch runs reliably. Its steel casing helps dissipate warmth. This makes certain stable performance gradually. Shield your CCTV financial investment. This miniature POE switch provides an easy, economical solution. It streamlines your video camera installation dramatically. Handle fewer wires and power points. Concentrate on your safety monitoring.

(Factory 10/100M unmanaged mini POE switch 6 port for cctv)

Applications of Factory 10/100M unmanaged mini POE switch 6 port for cctv

This small POE button powers your CCTV cameras straight. It plugs into your network. The button sends out both information and electricity over one cord. This suggests you do not need different power connects near each camera. It saves time. It conserves money on wiring.

Installment is easy. Just connect your IP cameras into any one of the six ports. Connect one port into your main network router or recorder. The button takes care of the remainder immediately. It’s unmanaged. You don’t need to set up anything. It functions right now. This is perfect for tiny configurations. Assume home security. Believe tiny stores. Think workplaces needing a couple of electronic cameras.

The switch offers standard 10/100Mbps speeds. This is fine for the majority of CCTV cameras. HD cameras stream more than this link. It uses IEEE 802.3 af/at POE criteria. Most modern IP electronic cameras support these criteria. Each port quits to 30 wati. This powers most dome video cameras, bullet video cameras, and tiny PTZ designs. Examine your cam’s power requires first.

Making use of POE makes your CCTV system cleaner. You run only one cable television to each video camera. This reduces clutter. It makes the system look more professional. It additionally makes fixing simpler. Fewer cables indicate fewer possible troubles. The switch itself is tough. Its steel case assists it last. It takes care of warm well. This integrity is essential for safety and security systems. Cameras should stay online.

Location the switch near your electronic cameras. Place it in a ceiling space. Put it in a wall surface box. Its little size assists it fit nearly anywhere. Keep it away from water. Maintain it far from severe warmth. Connect your network video clip recorder (NVR) to your primary router. Attach the POE switch to the very same network. Your cams link to the button. The NVR sees the cams. Tracking works smoothly. This arrangement reduces cable television runs considerably. It centralizes power neatly. Maintenance becomes easier long-lasting.

Wasifu wa Kampuni

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) ni mojawapo ya makampuni yanayoongoza katika teknolojia ya umeme wa umeme na bidhaa za nguvu, ambayo inahusika kikamilifu katika kuendeleza inverters za jua， transfoma, vidhibiti vya voltage, makabati ya usambazaji, thyristors， moduli， diodi， hita, na vifaa vingine vya elektroniki au halvledare. Tutajitolea kuwapa watumiaji ubora wa juu, bidhaa bora na huduma inayozingatia.

Inakubali malipo kupitia Kadi ya Mkopo, T/T, Muungano wa Magharibi, na Paypal. PDDN itasafirisha bidhaa kwa wateja wa ng'ambo kupitia FedEx, DHL, kwa bahari, au kwa hewa. If you want high-quality Factory 10/100M unmanaged mini POE switch 6 port for cctv, tafadhali tutumie maswali; tutakuwa hapa kukusaidia.

Mbinu za Malipo

L/C, T/T, Muungano wa Magharibi, Paypal, Kadi ya Mkopo nk.

Usafirishaji

Kwa bahari, kwa hewa, kwa kujieleza, kama wateja wanavyoomba.

Masharti ya Uhifadhi

1) Hifadhi katika mazingira kavu kwenye joto la kawaida.

2) Epuka unyevu na joto la juu.

3) Tumia mara baada ya kufungua mfuko wa ndani wa kufunga.

5 FAQs of Factory 10/100M unmanaged mini POE switch 6 port for cctv

What is an unmanaged POE switch?
This switch is plug-and-play. You don’t need to configure it. Connect your devices. It starts working immediately. This simplicity is perfect for basic setups like CCTV cameras. It handles power and data automatically.

Does this switch power my cameras?
Ndiyo. Four ports provide Power over Ethernet (POE). Plug your POE security cameras into these ports. The switch sends both data and electricity through one cable. This eliminates the need for separate power adapters near each camera. Installation becomes much cleaner and easier.

How fast are the network ports?
All six ports operate at 10/100Mbps speeds. This speed is sufficient for standard definition (SD) and high definition (HD) CCTV cameras. Most IP cameras work well within this bandwidth. It won’t support very high-resolution cameras needing Gigabit speeds. Check your camera requirements first.

What power supply does the switch need?
The switch requires an external power adapter. This adapter plugs into a standard wall outlet. It converts AC power to the DC power the switch uses. The switch then sends this DC power safely over the Ethernet cables to your cameras. The total POE power budget is typically 56W. This means it can power multiple cameras, but check each camera’s wattage.

How do I install this mini switch?
Mounting it is straightforward. The compact size helps. Use the included brackets. You can easily attach it to a wall or rack. Place it near your cameras or network recorder. Connect the power adapter. Plug your cameras into the POE ports. Connect the uplink port to your network router or recorder using a standard Ethernet cable.

(Factory 10/100M unmanaged mini POE switch 6 port for cctv)