MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

Introduction of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

The MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Till skillnad från isolerade moduler, MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Denna design förenklar kretsstrukturen, minskar kostnaden, och förbättrar effektiviteten.

 

Features and Benefits of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

Kompakt design: Eftersom inga ytterligare isoleringskomponenter krävs, MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123s are typically smaller and lighter in weight.

Hög prestanda: Minskad energiförlust på grund av isoleringskomponenter förbättrar den totala omvandlingseffektiviteten.

Låg kostnad: Dyra isoleringskomponenter elimineras, vilket resulterar i lägre tillverkningskostnader.

Snabb respons: Den inbyggda snabbåterställningsdioden (FRD) kan snabbt växla från ett på-läge till ett blockerande tillstånd, minska kopplingsförlusterna.

Hög tillförlitlighet: Avancerade material och teknologier används för att säkerställa stabil drift även i tuffa miljöer.

Lätt att installera och underhålla: Standardiserade gränssnitt och anslutningar förenklar installationsprocessen och underlättar senare underhåll.

(MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123)

Specification of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

The MMSZ4692ET1 is a Zener diode. It provides stable voltage guideline. Its primary job is maintaining a consistent 6.8 volt. This takes place when it runs in reverse malfunction. Consider it as a pressure safety valve for electrical power.

This certain diode manages a maximum power dissipation of 500 milliwatt. This ranking is very important. It tells you how much power the diode can securely manage. Exceeding this limitation threats damaging the part. Keep its power use listed below 500mW.

The ranked Zener voltage is 6.8 V. There is a resistance. The actual voltage might be in between 6.46 V and 7.14 V. This is a ± 5% tolerance. Expect this variant under examination problems. The examination current is usually 5mA.

Leakage current is low. At voltages listed below 6.8 V, really little reverse existing flows. The maximum leak is 5 microamps at 4V. This is good for efficiency. Less power is wasted when the diode is off.

The diode can be found in a SOD123 surface-mount package. This is extremely little. It conserves room on circuit card. The package is made for automated setting up. It prevails for modern electronics manufacturing.

The tool manages a broad temperature level variety. It works from -65 °C till +150 °C. This matches lots of environments. The Zener voltage adjustments slightly with temperature. The temperature coefficient is around +3 mV/ ° C for this voltage. This indicates the voltage enhances a little as it obtains hotter.

Common usages involve safeguarding circuits. It clamps voltage spikes. It maintains power supply outcomes. It supplies a reference voltage. You usually find it protecting sensitive inputs like CMOS logic gates. It stops voltage from going too expensive. It is also used in fundamental power regulation circuits. De 6.8 V degree is useful for lots of low-voltage digital systems.

(MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123)

Applications of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

This MMSZ4692ET1 diode is a Zener kind. It provides a stable 6.8 volt. Designers pick this diode for voltage law. It maintains voltages stable in lots of circuits. Power materials require this security. Battery-powered tools need it too. It manages 500 milliwatt effekt. This power rating fits typical electronic devices. It protects sensitive components. It quits voltage spikes from causing damages. Inputs on microcontrollers are susceptible. Sensor inputs can be delicate. This diode shields them. It clamps the voltage safely. It prevents signals from going too high. It prevents signals from going also low. It acts like a voltage reference. Circuits compare voltages against it. Analog-to-digital converters require accurate recommendations. This diode offers a reliable 6.8 V punkt. Its little SOD123 plan conserves room. Circuit card are commonly crowded. This little dimension fits quickly. Surface-mount assembly is typical. It functions well for portable gadgets. Automotive electronics utilize components such as this. Industrial controls need reputable components. Consumer electronic devices gain from its dimension. It takes care of modest power degrees properly. Designers trust its steady break down voltage. It starts conducting dependably at 6.8 V backwards. This predictable habits is essential. It makes sure consistent circuit procedure. It supplies an easy service for guideline. It gives an inexpensive option for security. It supplies a specific referral voltage. The MMSZ4692ET1 is a functional component.

Företagsprofil

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) är ett av de ledande företagen inom kraftelektronikteknik och kraftprodukter, som är fullt delaktig i utvecklingen av solväxelriktare， transformatorer, spänningsregulatorer, distributionsskåp, tyristorer， moduler， dioder， värmare, och andra elektroniska enheter eller halvledare. Vi kommer att vara engagerade i att ge användarna hög kvalitet, effektiva produkter och omtänksam service.

Den accepterar betalning med kreditkort, T/T, West Union, och Paypal. PDDN kommer att skicka varorna till kunder utomlands via FedEx, DHL, till sjöss, eller med flyg. If you want high-quality MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123, skicka oss förfrågningar; vi kommer att finnas här för att hjälpa dig.

 

Betalningsmetoder

L/C, T/T, Western Union, Paypal, Kreditkort etc.

 

Transport

Till sjöss, med flyg, med express, som kunderna begär.

 

Förvaringsvillkor

1) Förvara i en torr miljö i rumstemperatur.

2) Undvik fukt och hög temperatur.

3) Använd omedelbart efter att den inre förpackningspåsen har öppnats.

5 FAQs of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

What does the MMSZ4692ET1 Zener diode do?
It keeps a steady voltage. It makes sure 6.8 volts stays constant in a circuit. This protects parts from voltage spikes. It acts like a pressure relief valve for electricity.

How precise is the 6.8V rating?
It’s not perfectly exact. The actual voltage changes slightly. It depends on the current flowing through it. It also changes with temperature. Expect it between about 6.46 volts and 7.14 volts typically.

What does the 500mW power rating mean?
This is its maximum power limit. You cannot exceed 500 milliwatt. Calculate power by multiplying voltage drop across it by the current through it. Keep this number below 500mW always.

How do I connect it? Correct polarity matters?
Ja, polarity is critical. Connect it backwards compared to a normal diode. Look for the cathode stripe on the SOD123 package body. Point this stripe towards the higher voltage point in your circuit.

Does heat affect this diode?
Ja, heat matters a lot. Power dissipation creates heat. Too much heat damages the diode. The 500mW rating assumes proper cooling. Ensure the ambient temperature stays within the specified range. Provide enough airflow if needed.

(MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123)