DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

Introduction of DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

The DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Teu kawas modul terasing, DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923 does not use transformers or similar isolation components to separate inputs and outputs. Desain ieu simplifies struktur sirkuit, ngurangan ongkos, sarta ngaronjatkeun efisiensi.

 

Features and Benefits of DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

Desain kompak: Kusabab euweuh komponén isolasi tambahan diperlukeun, DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923s are typically smaller and lighter in weight.

kinerja luhur: Ngurangan leungitna énergi alatan isolasi komponén ngaronjatkeun efisiensi konversi sakabéh.

Biaya murah: Komponén isolasi mahal dileungitkeun, hasilna biaya produksi handap.

Tanggapan Gancang: Dioda Pamulihan Gancang anu diwangun (FRD) bisa gancang pindah ti kaayaan on-kaayaan blocking, ngurangan switching karugian.

Reliabiliti tinggi: Bahan sareng téknologi canggih dianggo pikeun mastikeun operasi anu stabil bahkan dina lingkungan anu parah.

Gampang masang sareng ngajaga: Interfaces sareng sambungan standar nyederhanakeun prosés pamasangan sareng ngagampangkeun pangropéa engké.

(DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923)

Specification of DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

This diode is the DZ9F13S92-7. It is a Zener diode. Tugas utami nyaéta pangaturan tegangan. Eta ngajaga tegangan ajeg dina 13 volt. Ieu tegangan Zener na. Ieu handles nepi ka 200 milliwatts kakuatan. This is its power dissipation rating. You cannot exceed this limit. The diode comes in a SOD923 package. This package is very small. Ieu ngaheéat spasi dina papan circuit. It is a surface-mount device. It gets soldered directly onto the PCB.

The diode controls voltage in reverse bias. It lets current flow backwards once voltage hits 13V. It clamps the voltage to this level. It protects sensitive parts. Ieu nyegah paku tegangan. It stabilizes power supplies. Designers use it for precise voltage references. It works well in low-power circuits. It fits portable gadgets. It suits battery-operated devices. Its small size is key for miniaturization.

Check the voltage tolerance. It is not exactly 13.000 volts every time. There is a small variation. This is normal for Zener diodes. Consider the power dissipation. 200mW is the absolute maximum. Run it below this for reliability. Heat affects performance. Keep it cool. The SOD923 package has two terminals. Soldering needs care. Use proper techniques. Follow the manufacturer’s data sheet. It has all the details. It shows the current-voltage curve. It lists thermal characteristics.

Pick this diode for 13V regulation needs. Use it where space is tight. It works in voltage clamps. It works in shunt regulators. Éta ngajaga input tina overvoltage. It is a common component. It is reliable for its job. Its specs meet many design requirements. Ensure your circuit current stays safe. Stay within the power limit. The diode does its job well under these conditions. It is a standard choice for 13V applications.

(DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923)

Applications of DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

This Zener diode, the DZ9F13S92-7, gives a stable 13 volt. Ieu handles 200 milliwatts kakuatan. Ieu leutik, using the SOD923 package. This makes it good for tight circuit boards.

Tugas utami nyaéta pangaturan tegangan. Circuits often need steady voltages. The power supply might change. This diode keeps the voltage steady at 13 volt. It acts like a pressure release. It shunts extra voltage away. Ieu ngajaga bagian sénsitip.

It works well as a voltage reference. Sababaraha sirkuit butuh titik tegangan dipikawanoh. This diode provides that 13V reference. It’s reliable for this job. It helps measure other voltages accurately.

Protecting circuits is another key use. Voltage spikes happen. They can damage electronics. This diode helps prevent that. If the voltage jumps above 13 volt, dioda konduktor. It pulls the voltage down. This shields other components.

It’s used for signal clamping too. Sometimes signals need limiting. The diode stops signals from going too high. It clips them at 13 volt. This is common in communication circuits.

The small SOD923 size saves space. Modern electronics are compact. This diode fits easily. It’s suitable for phones, tablets, and other gadgets. It works well in battery-powered devices. Its low power needs help conserve energy. Engineers pick it for portable electronics. Ieu nawiskeun kinerja dipercaya. It handles common voltage tasks efficiently.

Profil Perusahaan

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) mangrupikeun salah sahiji perusahaan anu unggul dina téknologi éléktronika listrik sareng produk listrik, nu pinuh aub dina ngembangkeun inverters surya， trafo, régulator tegangan, cabinets distribution, thyristors， modul， dioda， pamanas, jeung alat éléktronik lianna atawa semikonduktor. Kami bakal komitmen pikeun nyayogikeun pangguna anu kualitas luhur, produk efisien sarta jasa considerate.

Éta nampi pamayaran ngalangkungan Kartu Kredit, T/T, Uni Kulon, jeung Paypal. PDDN bakal ngintunkeun barang ka konsumén di luar negeri ngaliwatan FedEx, DHL, ku laut, atawa ku hawa. If you want high-quality DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923, mangga ngirim kami inquiries; kami bakal di dieu pikeun mantuan Anjeun.

 

Métode pamayaran

L/C, T/T, persatuan urang Barat, Paypal, Kartu kiridit jsb.

 

Pangiriman

Ku laut, ku hawa, ku express, sakumaha pamundut konsumén.

 

Kaayaan Panyimpenan

1) Nyimpen dina lingkungan garing dina suhu kamar.

2) Hindarkeun beueus sareng suhu luhur.

3) Anggo langsung saatos muka kantong packing jero.

5 FAQs of DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

What voltage does the DZ9F13S92-7 Zener diode regulate?
The DZ9F13S92-7 diode regulates voltage at 13 volt. This means it keeps a steady 13V across its terminals when operated correctly in reverse bias. You use it where you need a stable 13V reference point or protection level.

What kind of package is the DZ9F13S92-7 diode in?
This diode uses the SOD923 surface-mount package. SOD923 is very small. It is suitable for tight spaces on circuit boards. Its small size makes it good for compact electronic devices.

How much power can the DZ9F13S92-7 Zener diode handle?
The DZ9F13S92-7 has a power rating of 200 milliwatts (200mW). This is the maximum power it can safely dissipate. You must ensure the actual power in your circuit stays below this limit. Kalolobaan eta bisa ngaruksak dioda.

Where can I use the DZ9F13S92-7 Zener diode?
You often use this diode for voltage regulation. It provides a stable 13V output in simple power supplies. Another common use is voltage clamping. It protects sensitive components from voltage spikes by limiting the voltage to 13V. It also works well as a voltage reference signal.

What are the key specifications for the DZ9F13S92-7?
The key specs are its Zener voltage of 13V and its power dissipation of 200mW. It uses the SOD923 surface-mount package. Its small size and specific voltage make it useful in many electronic circuits needing 13V stability or protection.

(DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923)