MM3Z10VT1G Zener Diodë 10V 300mW IC Komponent elektronik Diodë

Introduction of MM3Z10VT1G Zener Diode 10V 300mW IC Electronic component Diode

The MM3Z10VT1G Zener Diode 10V 300mW IC Electronic component Diode is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Ndryshe nga modulet e izoluara, MM3Z10VT1G Zener Diode 10V 300mW IC Electronic component Diode does not use transformers or similar isolation components to separate inputs and outputs. Ky dizajn thjeshton strukturën e qarkut, ul koston, dhe përmirëson efikasitetin.

 

Features and Benefits of MM3Z10VT1G Zener Diode 10V 300mW IC Electronic component Diode

Dizajn kompakt: Sepse nuk kërkohen komponentë shtesë izolues, MM3Z10VT1G Zener Diode 10V 300mW IC Electronic component Diodes are typically smaller and lighter in weight.

Performancë e lartë: Humbja e reduktuar e energjisë për shkak të komponentëve të izolimit përmirëson efikasitetin e përgjithshëm të konvertimit.

Kosto e ulët: Përbërësit e shtrenjtë të izolimit eliminohen, duke rezultuar në kosto më të ulëta të prodhimit.

Përgjigje e Shpejtë: Dioda e integruar e rikuperimit të shpejtë (FRD) mund të kalojë shpejt nga një gjendje në gjendje bllokuese, reduktimin e humbjeve të ndërrimit.

Besueshmëri e lartë: Materialet dhe teknologjitë e avancuara përdoren për të siguruar funksionim të qëndrueshëm edhe në mjedise të vështira.

Lehtë për t'u instaluar dhe mirëmbajtur: Ndërfaqet dhe lidhjet e standardizuara thjeshtojnë procesin e instalimit dhe lehtësojnë mirëmbajtjen e mëvonshme.

(MM3Z10VT1G Zener Diodë 10V 300mW IC Komponent elektronik Diodë)

Specification of MM3Z10VT1G Zener Diode 10V 300mW IC Electronic component Diode

The MM3Z10VT1G is a Zener diode designed for voltage guideline in electronic circuits. It provides a stable 10V break down voltage, making it suitable for protecting delicate components from voltage spikes. The diode handles a power dissipation of 300mW, guaranteeing dependable performance in low-power applications. Its small SOD-323 surface-mount package saves area on circuit boards, suitable for modern electronics where miniaturization is essential.

This Zener diode runs within a temperature series of -55 ° C deri në +150 ° C, maintaining security across harsh atmospheres. The device features a sharp breakdown attribute, making it possible for accurate voltage securing. Onward voltage is ranked at 1.2 V, while reverse leakage current stays minimal under non-breakdown problems. These characteristics guarantee energy efficiency and decrease undesirable power loss.

The MM3Z10VT1G is typically made use of in voltage referral circuits, surge defense modules, and power supply stablizing. Its 10V score suits applications like voltage regulatory authorities in consumer electronics, automobile systems, and commercial controls. The diode’s tiny size permits combination into densely stuffed PCBs without jeopardizing functionality.

Production requirements abide by industry requirements, assuring consistent high quality. The part is RoHS-compliant, without harmful materials, and suitable with lead-free soldering procedures. Storage and operating problems comply with JEDEC standards, ensuring lasting reliability.

Managing the diode requires conventional electrostatic discharge safety measures to avoid damages. Appropriate soldering methods should be applied to avoid thermal anxiety. Surpassing the maximum power score or reverse voltage can deteriorate efficiency, requiring adherence to defined limitations.

The diode’s reduced impedance during break down ensures fast action to voltage fluctuations, protecting downstream components. Resistance for Zener voltage is tight, typically within ± 5%, making sure precision in guideline jobs. Dynamic resistance stays low, lessening voltage variations under changing load conditions.

Engineers value the MM3Z10VT1G for its balance of efficiency, madhësia, and expense. It is commonly available with electronics suppliers, sustained by datasheets outlining electrical qualities and application notes. Compatibility with automated assembly processes streamlines production, reducing production time and expenses.

Reliability testing includes moisture resistance, thermal cycling, and solderability checks, making sure toughness in real-world use. The diode’s construction utilizes silicon technology, supplying secure operation over extended periods.

(MM3Z10VT1G Zener Diodë 10V 300mW IC Komponent elektronik Diodë)

Applications of MM3Z10VT1G Zener Diode 10V 300mW IC Electronic component Diode

The MM3Z10VT1G Zener diode is a 10V 300mW digital part widely used in circuits needing voltage guideline. It keeps stable voltage degrees by allowing present to move backwards when a particular break down voltage is reached. This feature makes it perfect for securing sensitive elements from voltage spikes.

The diode matches voltage policy in power materials. It ensures linked gadgets receive a consistent 10V result even if input voltage rises and fall. This stability is essential for microcontrollers, njësitë ndijuese, and low-power ICs. The 300mW power rating balances effectiveness with compact style.

Circuit security is one more key application. The diode secures voltage surges by diverting excess existing far from crucial components. This protects against damages in automotive electronic devices, consumer gadgets, and industrial systems. Quick feedback time makes sure dependable security during unexpected voltage modifications.

The MM3Z10VT1G acts as a reference voltage source. Accuracy voltage referrals are important in analog-to-digital converters and measurement devices. The diode’s tight tolerance makes certain accurate readings in temperature level sensors or battery monitors.

Signal clamping uses the diode to limit waveform heights. Audio circuits and information transmission lines take advantage of this. It protects against overvoltage in amplifiers or communication components. The low leak present decreases energy loss during typical operation.

Surge suppression in telecom equipment depends on this diode. It safeguards ports and interfaces from electrostatic discharge or transient voltages. Its small SOD-323 package fits space-constrained styles like smart phones or IoT components.

Low-power applications consist of portable electronic devices. The diode’s 300mW rating matches gadgets focusing on power effectiveness. Solar-powered systems or wearable tech utilize it to handle voltage without draining pipes batteries.

The MM3Z10VT1G works in temperature-varying atmospheres. Secure efficiency across a large range makes certain reliability in outside or automobile settings. Robust construction resists mechanical stress and anxiety and thermal biking.

Compatibility with automated assembly processes speeds up production. Surface-mount style reduces hand-operated soldering costs. This makes the diode cost-efficient for high-volume production.

Designers pick the MM3Z10VT1G for its balance of size, pushtet, and accuracy. It deals with common obstacles in modern electronics. Consistent performance in diverse problems strengthens its function in reliable circuit layout.

Profili i Kompanisë

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) është një nga ndërmarrjet kryesore në teknologjinë elektronike të energjisë dhe produktet e energjisë, e cila është plotësisht e përfshirë në zhvillimin e inverterëve diellorë， transformatorëve, rregullatorët e tensionit, kabinete shperndarese, tiristorët， modulet， diodat， ngrohje, dhe pajisje të tjera elektronike ose gjysmëpërçues. Ne do të angazhohemi t'u ofrojmë përdoruesve cilësi të lartë, produkte efikase dhe shërbim i vëmendshëm.

Ai pranon pagesa me kartë krediti, T/T, West Union, dhe Paypal. PDDN do t'i dërgojë mallrat klientëve jashtë shtetit përmes FedEx, DHL, nga deti, ose me ajër. If you want high-quality MM3Z10VT1G Zener Diode 10V 300mW IC Electronic component Diode, ju lutemi na dërgoni pyetje; ne do të jemi këtu për t'ju ndihmuar.

 

Metodat e pagesës

L/C, T/T, Western Union, Paypal, Karta e Kreditit etj.

 

Dërgesë

Nga deti, nga ajri, me shprehje, sipas kërkesës së klientëve.

 

Kushtet e ruajtjes

1) Ruani në një mjedis të thatë në temperaturën e dhomës.

2) Shmangni lagështinë dhe temperaturën e lartë.

3) Përdoreni menjëherë pas hapjes së qeses së brendshme të paketimit.

5 FAQs of MM3Z10VT1G Zener Diode 10V 300mW IC Electronic component Diode

What does the MM3Z10VT1G Zener diode do?
The MM3Z10VT1G Zener diode controls voltage in electronic circuits. It maintains a steady 10V output when connected in reverse bias. This prevents voltage spikes from damaging sensitive components. It works by allowing current to flow backward once the voltage hits 10V.

What are the key specs of the MM3Z10VT1G?
The diode handles 10V breakdown voltage. Its power rating is 300mW. The package type is SOD-323 for surface-mount use. Temperaturat e funksionimit variojnë nga -55°C deri në 150°C. These specs make it suitable for low-power applications.

Where is the MM3Z10VT1G typically used?
It’s common in voltage regulation for small devices. Examples include voltage stabilizers in sensors or portable electronics. It protects circuits from overvoltage in surge-prone areas. It also serves as a reference voltage source in power supplies.

How is this Zener diode different from regular diodes?
Regular diodes block reverse current. The MM3Z10VT1G allows reverse current flow once voltage exceeds 10V. This makes it ideal for voltage clamping. Standard diodes focus on forward current rectification.

What precautions apply when soldering the MM3Z10VT1G?
Keep soldering temperatures below 260°C. Limit soldering time to three seconds. Excess heat damages the diode. Use proper ESD protection to avoid static discharge. Follow PCB layout guidelines for thermal management.

(MM3Z10VT1G Zener Diodë 10V 300mW IC Komponent elektronik Diodë)