MMSZ8V2ET1 ДИОД стабилитрон 8,2В 500МВт SOD123

Introduction of MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123

The MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. В отличие от изолированных модулей, MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Такая конструкция упрощает структуру схемы., снижает стоимость, и повышает эффективность.

 

Features and Benefits of MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123

Компактный дизайн: Поскольку не требуются дополнительные изоляционные компоненты., MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123s are typically smaller and lighter in weight.

Высокая производительность: Снижение потерь энергии благодаря изолирующим компонентам повышает общую эффективность преобразования..

Бюджетный: Дорогие изолирующие компоненты исключены., что приводит к снижению производственных затрат.

Быстрый ответ: Встроенный диод быстрого восстановления. (ФРД) может быстро переключаться из включенного состояния в состояние блокировки, снижение коммутационных потерь.

Высокая надежность: Используются передовые материалы и технологии для обеспечения стабильной работы даже в суровых условиях..

Простота установки и обслуживания: Стандартизированные интерфейсы и соединения упрощают процесс установки и облегчают последующее обслуживание..

(MMSZ8V2ET1 ДИОД стабилитрон 8,2В 500МВт SOD123)

Specification of MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123

The MMSZ8V2ET1 is a Zener diode. Its major job is voltage guideline. It gives a secure 8.2 вольты. This steady voltage is its nominal Zener voltage. You can count on it for this. The tolerance is plus or minus 5%. So the real voltage might be in between 7.79 volts and 8.61 вольты. This accuracy is important for many circuits.

It takes care of approximately 500 милливатт мощности. This is its optimal power dissipation. This ranking tells you how much energy it can securely soak up. Don’t surpass this restriction. Otherwise, the diode might overheat. Damages is likely.

The diode is available in a SOD123 surface-mount package. This package is extremely usual. It is little. The dimension is good for saving room on motherboard. You can place several components close together. This is useful in contemporary electronic devices.

The tool functions well for basic voltage policy jobs. It protects circuits from voltage spikes. It secures voltage rises. It offers a steady reference voltage. You see it in power materials frequently. It also aids protect delicate inputs. It protects against overvoltage damage. Battery-powered tools utilize it. Consumer electronic devices use it as well.

The optimal reverse leakage current is 5 microamps. This is determined at 6.2 вольты. Leakage is really reduced. This is efficient. The diode carries out dependably. Its ahead voltage has to do with 1 volt. This is typical for silicon diodes. It carries out existing when onward biased.

Taking care of surface-mount components requires treatment. Usage proper soldering techniques. Comply with the recommended temperature level account. This avoids damage. Check the datasheet for exact mounting information. Take note of polarity. The cathode end is noted. Mount it appropriately.

(MMSZ8V2ET1 ДИОД стабилитрон 8,2В 500МВт SOD123)

Applications of MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123

This MMSZ8V2ET1 diode is a Zener diode. It manages voltage at 8.2 вольты. It deals with up to 500 милливатт мощности. Its little SOD123 plan fits limited rooms. Lots of circuits need secure voltage. This Zener diode provides that. It quits voltage from going expensive. It safeguards sensitive components.

Power products commonly use this diode. It keeps the output voltage steady at 8.2 В. This benefits powering various other chips. Many chips require tidy, trusted power. This diode assists give them that. Circuits with altering lots benefit. Voltage stays constant.

It protects against voltage spikes. Abrupt voltage rises occur. They can damage transistors or ICs. Area this Zener diode across the high-voltage line. It secures any type of spike over 8.2 В. It shunts excess present to ground. This conserves expensive parts. Inputs and outcomes often need this protection.

It acts as a voltage referral. Some circuits need a known voltage factor. This diode offers a stable 8.2 V recommendation. It’s less expensive than a few other recommendation parts. It works well for fundamental demands. Battery chargers occasionally utilize it. It aids set the charging voltage level. Sensing unit circuits may use it also. It ensures precise readings.

Its 8.2 V rating works. Lots of typical logic chips utilize 5V or 3.3 В. An 8.2 V Zener supplies great defense headroom. It turns on prior to damages occurs. The SOD123 dimension is easy to put on motherboard. Это экономит место. It handles adequate power for several tiny work. This diode is an usual choice. Developers choose it for integrity and expense. It solves basic voltage troubles.

Профиль компании

Компания PDDN Photoelectron Technology Co., ООО(sales@pddn.com) является одним из ведущих предприятий в области силовой электроники и силовой продукции., которая полностью участвует в разработке солнечных инверторов， трансформаторы, регуляторы напряжения, распределительные шкафы, тиристоры， модули， диоды， обогреватели, и другие электронные устройства или полупроводники. Мы будем стремиться предоставлять пользователям высококачественные, эффективные продукты и внимательное обслуживание.

Он принимает оплату через кредитную карту, Т/Т, Вест Юнион, и PayPal. PDDN будет отправлять товары клиентам за границу через FedEx., ДХЛ, по морю, или по воздуху. If you want high-quality MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123, пожалуйста, пришлите нам запросы; мы будем здесь, чтобы помочь вам.

 

Способы оплаты

аккредитив, Т/Т, Western Union, ПайПал, Кредитная карта и т. д..

 

Отгрузка

По морю, по воздуху, экспресс, по запросу клиентов.

 

Условия хранения

1) Хранить в сухом месте при комнатной температуре..

2) Избегайте сырости и высоких температур.

3) Использовать сразу после открытия внутреннего упаковочного пакета..

5 FAQs of MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123

What is the MMSZ8V2ET1 diode for?
This diode regulates voltage. It keeps a steady 8.2 volts across its terminals. Circuits need this for stable power. It protects sensitive parts from voltage spikes.

Is the voltage exactly 8.2 вольты?
The voltage is close to 8.2 вольты. It is not perfectly exact. The actual voltage changes slightly with temperature. It changes slightly with current too. The datasheet shows the tolerance range. Check the datasheet for precise values.

How much power can it handle?
This diode handles 500 milliwatts maximum. Exceeding this power damages the diode. Calculate the power using voltage and current. Power equals voltage times current. Keep power under 500mW always. Use a heat sink if needed.

What does SOD123 mean?
SOD123 is the package size. It is very small. The diode fits tight spaces on circuit boards. It is suitable for surface mount soldering. This is common in modern electronics manufacturing.

Can I use a different Zener diode?
You can use another 8.2V Zener diode. The replacement must match key specs. The voltage must be 8.2V. The power rating must be 500mW or higher. The package must be SOD123 or compatible. Always verify the datasheet first.

(MMSZ8V2ET1 ДИОД стабилитрон 8,2В 500МВт SOD123)