MMSZ5221ET1 DIODO ZENER 2.4V 500MW SOD123

Introduction of MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

The MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Ao contrário dos módulos isolados, MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Este design simplifica a estrutura do circuito, reduz custo, e melhora a eficiência.

 

Features and Benefits of MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

Design compacto: Porque não são necessários componentes de isolamento adicionais, MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123s are typically smaller and lighter in weight.

Alto desempenho: A redução da perda de energia devido aos componentes de isolamento melhora a eficiência geral da conversão.

Baixo custo: Componentes de isolamento caros são eliminados, resultando em menores custos de fabricação.

Resposta rápida: O diodo de recuperação rápida integrado (FRD) pode mudar rapidamente de um estado ligado para um estado de bloqueio, reduzindo perdas de comutação.

Alta confiabilidade: Materiais e tecnologias avançadas são usados ​​para garantir uma operação estável mesmo em ambientes agressivos.

Fácil de instalar e manter: Interfaces e conexões padronizadas simplificam o processo de instalação e facilitam a manutenção posterior.

(MMSZ5221ET1 DIODO ZENER 2.4V 500MW SOD123)

Specification of MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

The MMSZ5221ET1 is a Zener diode. It provides a secure referral voltage. This diode is ranked for 2.4 volts. This voltage is its nominal Zener voltage. The actual voltage has a resistance. It can be plus or minus 5%. So the genuine voltage ranges between 2.28 volts and 2.52 volts. This precision is essential for accurate circuits.

The diode deals with an optimal power dissipation of 500 miliwatts. This is the power it can safely take in. You must not exceed this restriction. Surpassing it risks harming the part. The SOD123 surface install bundle houses this diode. This plan is extremely small. It conserves considerable room on circuit card. The SOD123 is prominent for modern electronic devices assembly. It is developed for effective automatic positioning.

This Zener diode is suitable for voltage regulation. It secures voltage spikes efficiently. It safeguards sensitive elements from overvoltage. You typically discover it shielding inputs on integrated circuits. It likewise supplies steady bias factors in analog circuits. The component functions well in power supplies. It maintains reduced voltage rails reliably. The MMSZ5221ET1 suits consumer electronics applications. It prevails in mobile gadgets. Industrial control systems likewise use this part.

Its operating temperature array is broad. It operates from -65 levels Celsius to +150 levels Celsius. This makes it robust for various environments. The diode features low leak current. This characteristic improves circuit efficiency. Excellent thermal performance comes from the SOD123 package. This assists manage warmth during operation. The MMSZ5221ET1 uses dependable performance. It is a common choice for 2.4 V guideline needs. Designers trust it for regular outcomes.

(MMSZ5221ET1 DIODO ZENER 2.4V 500MW SOD123)

Applications of MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

The MMSZ5221ET1 is a Zener diode. It provides a consistent 2.4 V voltage referral. This details part is available in the small SOD123 surface-mount package. Its small size fits well in modern, small electronic devices. The diode deals with as much as 500 miliwatts (mW) of power dissipation. This score is very important for its risk-free operation.

This diode works generally for voltage policy. It keeps a steady voltage throughout its terminals. When the voltage tries to exceed 2.4 V, the diode carries out heavily. This activity secures the voltage close to 2.4 V. So it shields delicate parts downstream from voltage spikes.

You discover it protecting low-voltage circuits. It’s common protecting inputs on microcontrollers or sensing units. These components typically need protection from unexpected voltage surges. O 2.4 V degree suits many low-power reasoning circuits. It secures interfaces like low-voltage serial lines.

Another vital usage is as a basic voltage reference. Circuits requiring an accurate 2.4 V factor use this diode. It offers a secure recommendation voltage. This serves in fundamental power products or sensor circuits. It supplies a low-cost method to obtain a known voltage degree.

Its SOD123 package is very popular. This makes assembly very easy using standard pick-and-place makers. The tiny impact saves important board area. Developers select it for thick circuit formats. Its efficiency is dependable for general-purpose jobs.

The diode has a tolerance of ± 5%. So the actual failure voltage varies in between 2.28 V and 2.52 V. Designers have to make up this range. Its efficiency modifications a little with temperature level. This is typical for Zener diodes. Circuits needing high precision might require extra parts.

It works for securing voltage transients. Consider occasions like electrostatic discharge (ESD). The diode promptly limits the voltage to its secure level. This avoids damages to extra costly ICs. It’s a standard foundation for circuit defense.

This diode is widely offered. It’s an affordable option for lots of styles. Its combination of 2.4 V ranking, 500mW power, and small dimension makes it flexible. It works well in battery-powered gizmos. It’s additionally found in USB peripherals and portable devices. Designers trust it for simple voltage control tasks.

perfil de companhia

PDDN Fotoelétron Technology Co., Ltda.(vendas@pddn.com) é uma das empresas líderes em tecnologia de eletrônica de potência e produtos de energia, que está totalmente envolvida no desenvolvimento de inversores solares， transformadores, reguladores de tensão, armários de distribuição, tiristores， módulos， diodos， aquecedores, e outros dispositivos eletrônicos ou semicondutores. Estaremos comprometidos em fornecer aos usuários produtos de alta qualidade, produtos eficientes e serviço atencioso.

Aceita pagamento via cartão de crédito, T/T, União Ocidental, e Paypal. PDDN enviará as mercadorias para clientes no exterior através da FedEx, DHL, por mar, ou por via aérea. If you want high-quality MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123, por favor envie-nos perguntas; estaremos aqui para ajudá-lo.

 

Métodos de pagamento

L/C, T/T, Western Union, PayPal, Cartão de crédito etc..

 

Remessa

Por mar, de avião, por expresso, como os clientes solicitam.

 

Condições de armazenamento

1) Armazenar em ambiente seco à temperatura ambiente.

2) Evite umidade e alta temperatura.

3) Use imediatamente após abrir a embalagem interna.

5 FAQs of MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

What is the MMSZ5221ET1?
It’s a Zener diode. It regulates voltage in circuits. It keeps voltage steady at a specific point. This diode is surface-mount. You find it in small electronic devices.

What voltage does it regulate?
It regulates at 2.4 volts. This is its Zener voltage. If voltage tries to go above 2.4V, the diode conducts. It clamps the voltage down to 2.4V. This protects sensitive parts.

Quanta energia ele pode suportar?
It can handle 500 miliwatts (0.5 watts). Esta é a sua dissipação máxima de potência. Don’t exceed this limit. Too much power will damage the diode. Check the current flowing through it.

What package does it use?
It comes in an SOD-123 surface mount package. This package is small. It saves space on circuit boards. You solder it directly onto the PCB. It’s common for automated assembly.

Where is this diode typically used?
It’s used for voltage regulation. It provides a stable 2.4V reference. It protects circuits from overvoltage. Common uses include protecting inputs on microcontrollers. It’s also used in power supplies.

(MMSZ5221ET1 DIODO ZENER 2.4V 500MW SOD123)