532nm 50mW Fat Beam Green Laser Diode Module TTL 12V light show

Introduction to Thyristor Diode Modules

Thyristor diode modules, often simply referred to as thyristors, are a type of semiconductor device used primarily for controlling and switching electrical power in various applications. They act as controlled switches, allowing current to flow when triggered by a small gate signal. Once turned on, they remain conducting until the current through them falls below a certain threshold or the direction of the current is reversed.

A thyristor module typically consists of multiple thyristors packaged together to handle higher currents or voltages than a single component could manage. These modules can be found in a variety of configurations, including SCR (Silicon Controlled Rectifier), TRIAC, and GTO (Gate Turn-Off) thyristors, each designed for specific types of power control tasks.

Features and Advantages of Thyristor Diode Modules

1. High Power Handling Capacity:
   Thyristor modules are capable of handling high levels of power, making them suitable for industrial applications that require robust and reliable power management solutions.

2. Efficient Power Control:
   Thyristors offer precise control over the power delivered to a load. By controlling the timing of the gate pulse, it’s possible to adjust the amount of power being transferred, which is particularly useful in AC power control applications such as dimming lights or speed control of motors.

3. Low Conduction Losses:
   When fully on, thyristors have low forward voltage drops, resulting in minimal power losses during conduction. This efficiency contributes to lower operating temperatures and improved energy efficiency.

4. Rugged Construction:
   Designed for harsh environments, thyristor modules feature durable packaging that can withstand mechanical stress, temperature fluctuations, and other environmental factors typical in industrial settings.

5. Compact Design:
   Despite their ability to handle significant power, modern thyristor modules are compact, enabling space-saving designs in equipment where size and weight are critical considerations.

6. Cost-Effective Solution:
   Thyristor modules provide an economical way to implement powerful switching and control functions compared to alternative technologies that might not be as efficient or may cost more per unit of power handled.

7. Simple Triggering Mechanism:
   Thyristors require only a small gate current to turn on, which simplifies the design of control circuits. The triggering mechanism can be easily integrated into existing systems with minimal additional components.

8. Wide Range of Applications:
   From motor control and power supplies to welding machines and traction systems, thyristor modules find application across a broad spectrum of industries due to their versatile characteristics.

9. Overcurrent Protection:
   Many thyristor modules come equipped with built-in protection features against overcurrent conditions, safeguarding both the device itself and connected loads from potential damage.

10. Fast Switching Speeds:
    Advanced thyristor modules can switch states rapidly, which is beneficial in applications requiring quick response times or frequent switching cycles without compromising performance.

(532nm 50mW Fat Beam Green Laser Diode Module TTL 12V light show)

Specification of 532nm 50mW Fat Beam Green Laser Diode Module TTL 12V light show

Below’s the specification web content for the 532nm 50mW Fat Light Beam Green Laser Diode Module TTL 12V light program:

This laser component generates an intense green beam of light at 532 nanometers wavelength. Its outcome power is a strong 50 milliwatts. You obtain a distinct “fat light beam” account. This thick beam of light develops very visible lines and effects. It looks great in light shows and visual screens.

The component operates on 12 volts DC power. This voltage is common and easy to provide. It features TTL (Transistor-Transistor Logic) modulation capacity. TTL allows you manage the laser light beam instantly. You can turn it fully on or fully off extremely quickly. This is vital for producing vibrant light show patterns. Link the TTL signal cord to your controller. Utilize the modulation input for exact brightness switching.

The thumbs-up is extremely extreme and pure. 532nm green is very visible to the human eye. It appears much brighter than various other colors at the same power. This makes it excellent for audience influence. The light beam divergence is enhanced for the fat light beam result. It maintains great exposure over range.

This component is built for trustworthy performance. It creates a steady beam of light output. The layout focuses on consistent procedure. It takes care of typical light show demands well. You need ample cooling. Make certain correct warm sinking throughout expanded use. Follow standard laser security techniques. Always wear appropriate safety eyewear for 532nm eco-friendly lasers. Never ever point the beam of light at people, pets, or aircraft.

This unit appropriates for varied applications. It works well in laser projectors. It benefits phase lighting effects. It fits clinical positioning jobs requiring clear green lines. Its combination of fat beam of light, intense thumbs-up, and TTL control uses flexibility. You obtain specialist results without intricate setup.

(532nm 50mW Fat Beam Green Laser Diode Module TTL 12V light show)

Applications of 532nm 50mW Fat Beam Green Laser Diode Module TTL 12V light show

This 532nm green laser module emits a bright, visible beam at 50mW power. Its fat beam account is essential. This creates a thicker, much more obvious line of light in the air. It works on 12V DC power. TTL control is integrated. This lets you transform the laser light beam on and off very quick using a basic electrical signal. You attach a control signal to the TTL input. This makes the beam of light react promptly. This component is constructed for aesthetic effect in light shows.

It works terrific for phase performances. The extreme thumbs-up cuts through various other phase illumination. It draws the audience’s eye. You can predict sharp lines, shapes, or patterns onto stage aspects. Its quick TTL response stays on top of songs beats. This develops vibrant results timed completely to the noise. DJs and VJs use it in clubs. The fat beam makes certain the laser graphics are bold and clear. It adds power to the dancing floor setting. You see sweeping lines and geometric forms moving with the songs.

Art installments profit too. Artists use this laser to attract lines precede. You produce temporary light sculptures. The pure environment-friendly color is vibrant. The fat beam makes these lines significant. It works well in fog or haze. This makes the beam of light itself the artwork. Planetariums and science facilities use comparable components. They simulate celebrity areas or demonstrate light homes. The bright green beam is superb for instructional displays. Its visibility helps explain concepts plainly.

The TTL attribute is crucial. It allows easy connection to DMX controllers or sound-activated systems. This automates the laser impacts. You program complex series. The laser switches on and off exactly when needed. This component is dependable. It supplies regular outcome for specialist shows. Its 12V power is common. This streamlines arrangement with other tools. The fat beam of light warranties your laser results are seen.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality 532nm 50mW Fat Beam Green Laser Diode Module TTL 12V light show, please send us inquiries; we will be here to help you.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

By sea, by air, by express, as customers request.

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of 532nm 50mW Fat Beam Green Laser Diode Module TTL 12V light show

What power does this laser module need?
This module runs on 12 volts DC. Check your power supply matches this exactly. Using the wrong voltage can break it. Connect the red wire to positive. Connect the black wire to negative.

What’s special about the beam?
It makes a 532 nanometer bright green light. The beam is wider than many lasers. This “fat beam” creates clear, bold lines perfect for light shows. The power is 50 milliwatts. This is strong enough for good visibility.

How does the TTL control work?
TTL means simple on/off control. Send a high signal (around 5V) to the control wire. The laser turns on. Send a low signal (0V). The laser turns off. This lets you pulse the laser quickly for effects. It works with DMX controllers or sound triggers.

Is this laser safe?
This laser is Class 3B. It is not safe for eyes. Never look into the beam. Never point it at people, animals, or vehicles. Use proper laser safety goggles rated for 532nm green light. Follow all local laser safety rules for public shows. Get permits if needed.

How do I install and cool this module?
Mount the module securely. Use the holes provided. This laser needs cooling. Attach a heat sink to the metal body. Active cooling like a small fan helps a lot during long use. Good cooling stops the laser from overheating. Overheating damages the diode.

(532nm 50mW Fat Beam Green Laser Diode Module TTL 12V light show)