SCR Thyristor Module R0809LS16A Phase Control Thyristor

Overview of Phase Control Thyristor

A phase control thyristor, often referred to as a triac or SCR (Silicon Controlled Rectifier) in certain applications, is a semiconductor device used for controlling the amount of power delivered to a load by adjusting the phase angle at which the AC waveform is allowed to conduct. This method of control is known as phase angle control or simply phase control. Phase control thyristors are widely used in various applications that require precise regulation of electrical power, such as lighting dimmers, motor speed controls, temperature controllers, and more.

Features of Phase Control Thyristor

Phase Angle Control: Allows adjustment of the conduction point within each half-cycle of the AC waveform, enabling precise control over the average power delivered to the load.

High Efficiency: Operates with minimal losses when conducting, providing efficient power control.

Bidirectional Conductivity (Triacs): For AC applications, triacs can conduct current in both directions, making them suitable for full-wave control of AC loads.

Unidirectional Conductivity (SCRs): SCRs conduct current in one direction only and are typically used for half-wave control of AC or DC loads.

Gate Triggering: Conduction begins when a small current is applied to the gate terminal, allowing for easy control of the turn-on point.

Latching Current: Once triggered, the thyristor continues to conduct until the current through it falls below a certain level called the holding current.

Temperature Sensitivity: Performance can be affected by temperature changes, requiring thermal management considerations in design.

Voltage and Current Ratings: Available in a wide range of voltage and current ratings to suit different application needs.

Noise Generation: Can generate electromagnetic interference (EMI), necessitating proper filtering and shielding in sensitive applications.

Protection Mechanisms: Often include built-in protection against overvoltage and overcurrent conditions to safeguard the device and connected systems.

(SCR Thyristor Module R0809LS16A Phase Control Thyristor)

Specification of SCR Thyristor Module R0809LS16A Phase Control Thyristor

The SCR Thyristor Component R0809LS16A takes care of high-power air conditioning switching. It regulates electrical power circulation properly. This module integrates 2 silicon-controlled rectifiers (SCRs). They link in an inverse-parallel setup. This setup manages present flow in both instructions.

The module manages considerable voltage. Its repeated optimal off-state voltage gets to 800 volts. This suits requiring industrial atmospheres. It handles substantial present as well. The average on-state current ranking is 80 amps. This makes it strong for heavy loads.

Stage control is its main work. It exactly handles when power activates during each air conditioner cycle. This manages the ordinary power supplied to a tons. Believe motor speed law or heating element control. Its gateway trigger current is reduced. This simplifies driving it with control circuits.

Heat administration is important. The component places straight onto a heatsink. This dissipates warmth created during procedure. Appropriate installing ensures steady efficiency. It stops overheating failures. The thermal resistance junction-to-case is low. This assists heat relocate away from the silicon chips quickly.

The R0809LS16A makes use of a common cathode setup. Both SCRs share a cathode connection. This simplifies electrical wiring in circuits. It uses a common component bundle. This ensures compatibility with typical heatsinks and installing equipment.

Its applications are wide. You find it in commercial electric motor controllers. It works in temperature level law systems. Lighting dimmers use similar modules. It fits well in a/c power switches and solid-state relays. This module offers reputable switching for phase-controlled tons.

(SCR Thyristor Module R0809LS16A Phase Control Thyristor)

Applications of SCR Thyristor Module R0809LS16A Phase Control Thyristor

The SCR thyristor component R0809LS16A manages high electric power. It manages power circulation precisely utilizing stage angle control. This technique changes the factor power turns on throughout the a/c voltage cycle. The component deals with high currents and voltages dependably. It obstructs voltage up to 1600 volts. It performs average existing approximately 80 amperes. This makes it strong for challenging commercial work.

The R0809LS16A fits several applications requiring variable power. It works well controlling electric motors. It changes motor speed efficiently in fans, pumps, and conveyor systems. Factories use this for much better process control and conserving power. It controls power in industrial heaters. Heating systems, ovens, and drying out systems require steady temperature level. This component delivers exact heat levels. Lighting systems take advantage of its lowering capacity. It changes illumination in big venues or streetlights precisely.

Power products utilize this thyristor component. It controls outcome voltage in rectifiers and converters. Battery chargers require stable charging currents. This module offers that control. Soft beginners for electric motors protect against sudden jolts. They minimize stress and anxiety on machinery at start-up. The R0809LS16A enables this mild begin. Uninterruptible power materials (UPS) handle power circulation during failures. This component helps change power sources swiftly.

The module is built difficult. Its protected instance gives electrical safety and security. Installing it straight on heatsinks is straightforward. This design keeps it amazing under hefty lots. It connects conveniently with screw terminals. Dependability is type in commercial settings. The R0809LS16A offers trustworthy performance with time. It withstands requiring electrical problems. Upkeep needs are reduced. This module is a practical option for power control.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality SCR Thyristor Module R0809LS16A Phase Control Thyristor, please send us inquiries; we will be here to help you.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

By sea, by air, by express, as customers request.

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of SCR Thyristor Module R0809LS16A Phase Control Thyristor

What is the R0809LS16A?
The R0809LS16A is a SCR thyristor module. It controls AC power flow. It uses phase control. This means it switches power on at specific points within the AC wave cycle. It manages high currents effectively. It is built for reliability.

Where is it typically used?
This module powers industrial equipment. It controls electric motors. It manages heating elements. It adjusts lighting levels. It operates in power supplies. You find it in machines needing precise AC power adjustment. Factories use it often.

What are its main electrical specs?
The module handles 800V peak repetitive voltage. It manages 800V peak non-repetitive voltage. Its average current rating is 80A. It can handle much higher surge currents briefly. These specs suit demanding industrial jobs. They ensure stable operation under load.

Does it need cooling?
Yes, cooling is essential. Mount it on a heatsink. Use thermal grease. The heatsink must be big enough. Airflow must be sufficient. Good cooling prevents overheating. Overheating damages the module. Always check its temperature in use.

How do I connect it?
The module has screw terminals. Connect your AC power lines here. Connect your control signals here too. Follow the wiring diagram exactly. Use the right wire size. Tighten connections securely. Loose connections cause problems. Double-check polarity.

(SCR Thyristor Module R0809LS16A Phase Control Thyristor)