MMSZ9V1ET1 DIODE ZENER 9.1V 500MW SOD123

Introduction of MMSZ9V1ET1 DIODE ZENER 9.1V 500MW SOD123

The MMSZ9V1ET1 DIODE ZENER 9.1V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ9V1ET1 DIODE ZENER 9.1V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of MMSZ9V1ET1 DIODE ZENER 9.1V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ9V1ET1 DIODE ZENER 9.1V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ9V1ET1 DIODE ZENER 9.1V 500MW SOD123)

Specification of MMSZ9V1ET1 DIODE ZENER 9.1V 500MW SOD123

The MMSZ9V1ET1 is a Zener diode. Its job is voltage regulation. It keeps a steady voltage across itself in a circuit. This voltage is precisely 9.1 volts. This specific voltage is its key characteristic. You select it when you need exactly 9.1 volts.

It handles up to 500 milliwatts of power. This power rating is important. It tells you how much energy the diode can safely manage without failing. Exceeding this limit risks damaging the component. Always consider the circuit’s power requirements.

The diode comes in a SOD123 surface-mount package. This package is very small. It saves space on printed circuit boards (PCBs). Its compact size makes it ideal for modern electronics where space is limited. The SOD123 package is common and easy for machines to place during manufacturing.

This diode uses silicon technology. Silicon devices are reliable. They perform well over a range of temperatures. This particular diode operates reliably from -65°C to +150°C. This wide temperature range suits many different environments and applications.

The MMSZ9V1ET1 offers good voltage stability. Its performance is consistent. It features low leakage current. This means very little unwanted current flows when it shouldn’t. This helps conserve power. It also has a sharp breakdown characteristic. This means it starts regulating voltage very close to its nominal 9.1V rating.

You find Zener diodes like this one in many circuits. They protect sensitive components from voltage spikes. They provide stable reference voltages for power supplies. They clamp signals to safe levels. They are essential building blocks for reliable electronic designs. This diode is a solid choice for 9.1V regulation tasks needing a small, efficient part. It fits well in power management circuits, voltage references, and signal conditioning.

(MMSZ9V1ET1 DIODE ZENER 9.1V 500MW SOD123)

Applications of MMSZ9V1ET1 DIODE ZENER 9.1V 500MW SOD123

This diode is a 9.1-volt Zener diode. It handles up to 500 milliwatts of power. Its small SOD123 package fits easily on circuit boards. Its main job is controlling voltage. You use it to keep a steady 9.1 volts in a circuit. It does this even if the input voltage changes or the load varies. This stable voltage protects sensitive parts downstream.

Another key use is protecting circuits from too much voltage. Connect it across the power supply lines. Normally, it acts like an open circuit. If the voltage spikes above 9.1 volts, the diode conducts. It shorts the excess voltage safely to ground. This stops the higher voltage from damaging other components. Think of it like a pressure relief valve for electricity.

You also find this diode creating fixed voltage points. Circuits need stable reference voltages for accurate measurements. This Zener provides a reliable 9.1V reference. Its stable voltage under different conditions makes it good for this. Designers use it in power supplies, sensor interfaces, or analog circuits needing a known voltage level.

It works well for clamping signals too. Sometimes you need signals to stay within a specific range. Placing this Zener diode can limit a signal’s maximum voltage. It prevents the signal from going higher than 9.1 volts plus its own small forward voltage drop. This protects input pins on microcontrollers or other ICs.

Its small size and reliable performance are big advantages. You’ll often see it protecting communication lines like RS-232 or USB data lines. It guards against unexpected static discharge or voltage surges. It provides simple, effective protection right where it’s needed. Designers value its predictable breakdown voltage and compact footprint. It solves common voltage regulation and protection problems efficiently.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ9V1ET1 DIODE ZENER 9.1V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ9V1ET1 DIODE ZENER 9.1V 500MW SOD123

What is the MMSZ9V1ET1 diode used for?
This diode protects circuits from voltage spikes. It keeps voltage stable at 9.1 volts. It clamps voltage surges safely to ground. It shields sensitive electronic parts from damage.

What voltage does this Zener diode regulate?
It regulates voltage at 9.1 volts. This is its rated breakdown voltage. The actual voltage might be slightly different. Check the datasheet for exact tolerance values. It’s designed for 9.1V regulation.

How much power can this diode handle?
It handles up to 500 milliwatts of power. This is its maximum power dissipation limit. Exceeding this can destroy the diode. Consider heat and operating conditions for reliability. Stay below 500mW.

What package is this Zener diode in?
It uses the SOD123 surface mount package. This is a small, common package size. It fits easily on circuit boards. The SOD123 is standard for many diodes. Its size is suitable for automated assembly.

Where is this diode commonly used?
Use it for voltage regulation in power supplies. It protects inputs and outputs from overvoltage. It stabilizes reference voltages. It’s good for consumer electronics and industrial controls. Use it anywhere 9.1V clamping is needed.

(MMSZ9V1ET1 DIODE ZENER 9.1V 500MW SOD123)