MMSZ8V2T1 DIODE ZENER 8.2V 500MW SOD-123

Introduction of MMSZ8V2T1 DIODE ZENER 8.2V 500MW SOD-123

The MMSZ8V2T1 DIODE ZENER 8.2V 500MW SOD-123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ8V2T1 DIODE ZENER 8.2V 500MW SOD-123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ8V2T1 DIODE ZENER 8.2V 500MW SOD-123

Compact design: Because no additional isolation components are required, MMSZ8V2T1 DIODE ZENER 8.2V 500MW SOD-123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ8V2T1 DIODE ZENER 8.2V 500MW SOD-123)

Specification of MMSZ8V2T1 DIODE ZENER 8.2V 500MW SOD-123

The MMSZ8V2T1 is a Zener diode. It gives a stable reference voltage. This specific part is designed for 8.2 volts. It handles up to 500 milliwatts of power. This power rating is crucial. It tells you how much energy the diode can safely manage before getting too hot. The SOD-123 package is very small. It saves space on your circuit board. This makes it good for compact devices.

Zener diodes work in reverse bias. They breakdown at a precise voltage. This creates a stable voltage reference. You use them for voltage regulation. They protect circuits from voltage spikes. They also set voltage levels in various designs. The MMSZ8V2T1 offers this 8.2V reference.

The tolerance is important. It tells you how close the actual voltage is to 8.2V. A common tolerance is ±5%. This means the voltage could be between 7.79V and 8.61V. Check the datasheet for the exact tolerance. The temperature coefficient matters too. It shows how much the voltage changes with temperature. A low coefficient is better for stability.

This diode handles a maximum current. The current depends on the power. At 500mW and 8.2V, the max current is roughly 61mA. Do not exceed this current. Exceeding it can destroy the diode. The SOD-123 package has two leads. It is easy to solder onto PCBs. Its small size is a big advantage in modern electronics.

(MMSZ8V2T1 DIODE ZENER 8.2V 500MW SOD-123)

Applications of MMSZ8V2T1 DIODE ZENER 8.2V 500MW SOD-123

The MMSZ8V2T1 is a common Zener diode. Its main job is voltage regulation. It keeps voltage steady at 8.2 volts. This part handles up to 500 milliwatts of power. The small SOD-123 package saves space on circuit boards.

One key use is protecting circuits. Sensitive electronics don’t like high voltage spikes. This diode stops voltage from going above 8.2 volts. It clamps the voltage safely. This protects components like microchips. It’s often placed near inputs or outputs. It diverts extra voltage away.

Another job is providing a stable reference voltage. Some circuits need a precise voltage to compare against. The 8.2V level from this Zener serves as a good reference point. This is useful in power supplies or measurement circuits. It helps other parts work correctly.

This diode works in reverse bias mode for regulation. Forward bias acts like a normal diode. It conducts current easily one way. Reverse bias holds voltage constant at 8.2V. This characteristic is essential for its jobs. It’s reliable for these tasks.

Designers choose it for its size and rating. The SOD-123 is tiny. It fits into tight spots. The 500mW rating offers good power handling. It balances performance with space needs. It’s found in many gadgets. Phones, computers, power adapters use it. It’s a basic part for controlling voltage.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ8V2T1 DIODE ZENER 8.2V 500MW SOD-123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ8V2T1 DIODE ZENER 8.2V 500MW SOD-123

What is the MMSZ8V2T1 diode?
This diode is a Zener diode. It controls voltage in circuits. Its job is to keep a steady voltage. It does this even when the current changes. The number 8.2V tells you its voltage. It breaks down at 8.2 volts. This stops higher voltages from getting through.

What does the 500mW rating mean?
The 500mW is the power rating. It tells you how much heat the diode can handle. You must not let the diode use more power than this. Too much power makes it overheat. Overheating can break the diode. So check the current flowing through it. Make sure the power stays below 500 milliwatts.

Why use an 8.2V Zener diode?
An 8.2V Zener diode is common. It protects sensitive parts. It stops voltage spikes. It keeps voltage safe for other components. It is good for circuits needing just over 8 volts. It fits many designs. Its small size helps save space.

How do I connect this diode?
Connect the Zener diode backwards. Its cathode goes to the positive side. Its anode goes to the negative side. This is reverse bias. Normal diodes block current this way. The Zener diode breaks down at 8.2V. It starts conducting then. It limits the voltage to 8.2 volts.

What must I watch out for?
Watch the current carefully. Use a resistor in series. This resistor limits the current. It protects the diode. It stops the power from getting too high. Keep the power under 500mW. Also, connect it the right way around. Wrong connection might not work. It could let high voltage pass.

(MMSZ8V2T1 DIODE ZENER 8.2V 500MW SOD-123)