MMSZ5264BT3 DIODE ZENER 60V 500MW SOD123

Introduction of MMSZ5264BT3 DIODE ZENER 60V 500MW SOD123

The MMSZ5264BT3 DIODE ZENER 60V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ5264BT3 DIODE ZENER 60V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of MMSZ5264BT3 DIODE ZENER 60V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ5264BT3 DIODE ZENER 60V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ5264BT3 DIODE ZENER 60V 500MW SOD123)

Specification of MMSZ5264BT3 DIODE ZENER 60V 500MW SOD123

This diode is the MMSZ5264BT3. It’s a Zener diode. Zener diodes control voltage in circuits. They keep voltage steady. This specific diode handles 60 volts. Its Zener voltage is 60V. We measure voltage at the test current. The test current is 5mA.

The diode comes in a SOD123 package. This package is small. It’s handy for saving space on circuit boards. The SOD123 is a surface-mount device (SMD). It fits automated assembly lines well.

Power handling matters. This diode manages 500 milliwatts (500mW) total power. Don’t exceed this limit. Power dissipation depends on temperature. Higher temperatures lower the safe power level. Check the datasheet graph.

Voltage tolerance is important. The actual Zener voltage might differ slightly. It can be plus or minus 5% from the 60V target. We test every diode. We guarantee it meets this specification.

Leakage current is very low. This diode blocks reverse current effectively. Leakage stays below 100 nanoamperes (100nA) at lower voltages. This efficiency helps save power.

It handles reasonable surge currents. Brief spikes won’t damage it. The maximum junction temperature is 150 degrees Celsius. Keep it cooler than this. Storage temperature range is wider. It stores safely from -65°C to +175°C.

This diode suits voltage regulation tasks. Use it for voltage reference points. It protects sensitive components from overvoltage. Its small size fits many modern electronic designs.

We ensure consistent performance. Quality control is strict. Reliability meets industry standards.

(MMSZ5264BT3 DIODE ZENER 60V 500MW SOD123)

Applications of MMSZ5264BT3 DIODE ZENER 60V 500MW SOD123

The MMSZ5264BT3 is a Zener diode. It handles 60 volts. It manages 500 milliwatts of power. This diode comes in a SOD123 package. This package is very small. It fits well on modern circuit boards. Its main job is voltage regulation. It keeps voltages steady. This is important for sensitive electronics. Circuits need stable power. This diode provides that stability.

It protects circuits from voltage spikes. Surges happen unexpectedly. Power lines can have noise. This diode clamps those high voltages. It diverts extra voltage safely to ground. This prevents damage to other parts. Devices last longer this way. It acts like a safety valve for electricity.

This diode sets reference voltages. Many circuits need a known voltage level. Sensors and analog circuits rely on accurate references. The 60V rating offers a precise point. Designers choose this value for specific needs. It ensures circuits operate correctly.

It also works as a clamp. Signals sometimes swing too high. This diode limits the maximum voltage. It clips the top of the signal waveform. This protects input pins on chips. Digital logic can be sensitive. Clamping prevents false signals or damage.

The small SOD123 size is a big plus. Modern electronics are compact. Space on the board is limited. This diode takes up very little room. It fits densely packed designs. Its power rating is good for its size. Five hundred milliwatts is sufficient for many protection and regulation tasks. Designers value its reliability.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ5264BT3 DIODE ZENER 60V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ5264BT3 DIODE ZENER 60V 500MW SOD123

MMSZ5264BT3 DIODE ZENER 60V 500MW SOD123: Frequently Asked Questions

What does this diode do?
This diode protects circuits from voltage spikes. It acts like a pressure relief valve for electricity. Apply reverse voltage across it. It blocks the current flow normally. The voltage reaches 60V. The diode “breaks down” then. It starts conducting heavily. This action clamps the voltage near 60V. It protects sensitive parts downstream.

Why pick 60V?
Choose 60V because your circuit needs protection at that specific voltage level. Maybe your components tolerate up to 60V safely. You need the clamping voltage just above your normal operating voltage. This ensures the diode stays off during regular operation. It activates only during dangerous over-voltage events.

What does 500mW mean?
500mW is the diode’s power rating. It shows the maximum power the diode can safely handle continuously. Power equals voltage times current (P = V I). The diode clamps at 60V. The current flowing through it must stay low. Calculate the max safe current: I = P / V = 0.5W / 60V ≈ 8.3mA. Exceeding 500mW risks destroying the diode.

Does temperature affect it?
Yes, temperature changes the Zener voltage. The voltage specification (60V) is typically given at 25°C (room temperature). The voltage shifts slightly if the diode gets hotter or colder. Check the datasheet graphs. They show the exact voltage change over temperature for this specific part. Factor this into your design for precision applications.

Does direction matter?
Direction matters absolutely. This is a Zener diode. It requires correct polarity to function as intended. Connect the cathode (marked with a band) to the positive voltage side you want to clamp. Connect the anode to ground (or lower voltage). Reverse biasing it activates the Zener breakdown effect. Connecting it forward just acts like a normal diode.

(MMSZ5264BT3 DIODE ZENER 60V 500MW SOD123)