MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

Introduction of MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

The MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123)

Specification of MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

This diode is the MMSZ5256ET1. It is a Zener diode. Its job is voltage regulation. It keeps voltages steady in circuits. The nominal Zener voltage is 30 volts. This voltage is measured at a specific test point. The test current is 5 milliamps. The voltage tolerance is tight. It is plus or minus 5%. This means the actual voltage can be between 28.5 volts and 31.5 volts. This precision is important for stable circuits.

The diode handles power well. Its power dissipation rating is 500 milliwatts. This rating applies at 25 degrees Celsius. The diode can manage this heat. It uses a SOD123 surface mount package. This package is small. It saves space on circuit boards. Mounting it is straightforward for manufacturers.

Temperature changes affect performance. The Zener voltage shifts slightly with temperature. The temperature coefficient is typically 0.07% per degree Celsius. This value is low. It indicates good stability over normal operating temperatures. The diode works reliably within a temperature range. This range is from minus 65 degrees Celsius to plus 150 degrees Celsius. Storage temperatures are the same.

The diode handles reverse current effectively. The maximum reverse leakage current is low. It is 0.1 microamps at 20 volts. This low leakage is good. It prevents wasted power. The diode is designed for surface mounting. It suits automated assembly processes. It is used often in voltage reference circuits. It is also used in overvoltage protection circuits. It helps clamp voltages safely. It protects sensitive components downstream. The MMSZ5256ET1 offers reliable performance. It provides a stable 30-volt reference.

(MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123)

Applications of MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

This diode regulates voltage. It keeps voltage steady at 30 volts. Engineers call this a Zener voltage. This diode handles 500 milliwatts of power. Its small SOD123 package fits easily on circuit boards.

The main job is voltage regulation. Circuits need stable voltage. Power supplies can vary. This diode fixes that. Connect it across the power supply output. When voltage tries to go above 30 volts, the diode activates. It clamps the voltage down. The voltage stays at 30 volts. This protects sensitive parts downstream.

This diode also protects circuits. Voltage spikes happen. These spikes can damage electronics. Place this diode at the input. A sudden surge hits the circuit. The diode conducts instantly. It shorts the spike to ground. This saves other components. It acts like a safety valve for electricity.

It serves as a voltage reference. Some circuits need a precise voltage level. This diode provides a stable 30 volt point. Other parts compare against this reference. Voltage regulators use this. Measurement circuits use it too. It gives a reliable starting point.

This diode clamps signals. Signals can swing too high. Place this diode from the signal line to ground. The signal exceeds 30 volts. The diode turns on. It limits the peak voltage. This prevents damage to input pins. It keeps signals within safe bounds.

Its small size helps. The SOD123 package is compact. It saves space on crowded boards. This is good for modern electronics. Phones, computers, power adapters use parts like this. The 500mW rating offers decent power handling. It works well for many common tasks.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

What is the MMSZ5256ET1 diode? It is a Zener diode. Its job is to keep a voltage steady at 30 volts. It handles up to 500 milliwatts of power. The diode comes in a small SOD123 package. This size makes it good for tight spaces on circuit boards.

Why use a 30V Zener diode? You use it to clamp voltage. You use it to provide a stable reference voltage. Circuits need steady voltages to work right. This diode gives you that 30V point. It protects parts from voltage spikes too.

What does 500mW power rating mean? This tells you the maximum power the diode can safely handle. Power is voltage times current. You must not exceed this 500mW limit. Going over can damage the diode. Always check the current flowing through it.

What is the SOD123 package? SOD123 is a standard surface-mount diode case. It is small and rectangular. It has two leads for soldering onto a circuit board. This size saves space. It is common for diodes like this Zener.

Where is this diode typically used? You find it in power supplies. You find it in voltage regulator circuits. It protects sensitive components from overvoltage. It sets voltage levels in electronic devices. It is useful anywhere you need a fixed 30V reference.

(MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123)