MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Introduction of MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123

The MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123

(MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123)

Specification of MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123

The MMSZ5246BT3 is a Zener diode. It regulates voltage. This part provides a stable 16-volt reference. Its nominal Zener voltage is 16V. You measure this voltage at the test point. The test current is 5mA. The voltage tolerance is tight. It is ±5%. This means the actual voltage stays between 15.2V and 16.8V. This accuracy is important for stable circuits.

It handles significant power. The maximum power dissipation is 500 milliwatts. This power rating is for continuous operation. The SOD123 surface-mount package houses the diode. This package is very small. It saves valuable board space. The SOD123 is common. It is easy to use in automated assembly processes. Two leads connect the diode to the circuit board.

The MMSZ5246BT3 works in reverse breakdown mode. Normal diodes block reverse current. This Zener diode conducts reverse current at its specified voltage. This action clamps the voltage across it. It prevents voltage spikes from damaging sensitive components. It protects circuits from overvoltage events. It is ideal for voltage regulation tasks. Use it to set a fixed voltage level. It works well in power supplies. It stabilizes voltage references. It protects input pins on ICs.

Its small size is a major advantage. The SOD123 package fits densely packed designs. The 500mW rating offers good protection capability. It handles typical surges. The 16V rating suits many common digital circuits. These circuits often use 12V or 15V supplies. This diode provides reliable overvoltage protection for them. It is a cost-effective solution. It is readily available. Designers trust this component for basic regulation. It ensures stable operation. It guards against unexpected voltage increases.

MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123

(MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123)

Applications of MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123

This MMSZ5246BT3 Zener diode handles 16 volts. It manages 500 milliwatts of power. Its small SOD123 package fits tight spaces easily. This diode is vital for steady voltage in many circuits.

It excels at keeping voltage stable at 16 volts. If voltage climbs too high, the Zener diode activates. It pulls extra current down to ground. This action clamps the voltage firmly at 16 volts. Circuits need this stable reference point. It protects sensitive parts from voltage changes. Power supplies use it often for this job. It ensures other components get only the voltage they need.

This diode also guards against sudden voltage spikes. Surges happen often. They come from power glitches or static electricity. The MMSZ5246BT3 reacts very fast. It stops these spikes before they harm transistors or ICs. Place it near the input of a circuit. It protects the whole system. USB ports and chargers benefit from this protection. Sensor inputs need it too.

Its small SOD123 size is a big plus. Modern electronics are incredibly compact. This tiny diode fits easily onto crowded circuit boards. Designers save valuable space. It works reliably in battery-powered gadgets. Its low cost makes it a practical choice for many projects.

You find it in voltage regulators for microcontrollers. It provides a stable 16V point for feedback circuits. Power management units use it for overvoltage protection. Automotive electronics rely on it for surge suppression. Signal lines use it to block noise. It’s a fundamental part for reliable circuit design needing precise 16V control.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters, transformers, voltage regulators, distribution cabinets, thyristors, modules, diodes, heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123

What does this diode do?
This diode keeps voltage steady at 16 volts. It lets current flow backwards when voltage hits 16V. This protects sensitive parts in your circuit.

How exact is the 16V rating?
The voltage isn’t perfect 16V every time. It can be a little higher or lower. Check the datasheet for the exact range. It’s usually pretty close.

Where do people use this diode?
Use it for voltage regulation. It sets a stable reference point. It also protects circuits from voltage spikes. Common spots are power supplies and protecting input pins.

What does the 500mW rating mean?
This number tells you the most power it can handle safely. 500mW equals half a watt. Exceeding this burns out the diode. Always check your circuit’s power.

Can I use a different Zener diode?
Maybe. The voltage must match your need. The power rating must be high enough. The SOD123 package size matters for fitting on your board. Check the specs first.

MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123

(MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123)

REQUEST A QUOTE

REQUEST A QUOTE