MMSZ5246B-7 DIODE ZENER 16V 500MW SOD123

Introduction of MMSZ5246B-7 DIODE ZENER 16V 500MW SOD123

The MMSZ5246B-7 DIODE ZENER 16V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ5246B-7 DIODE ZENER 16V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ5246B-7 DIODE ZENER 16V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ5246B-7 DIODE ZENER 16V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ5246B-7 DIODE ZENER 16V 500MW SOD123)

Specification of MMSZ5246B-7 DIODE ZENER 16V 500MW SOD123

The MMSZ5246B-7 is a Zener diode. Zener diodes are special. They control voltage in circuits. This specific diode has a 16-volt rating. That means it works best at 16 volts. It can handle power up to 500 milliwatts. That’s its maximum power dissipation. This diode is small. It comes in an SOD123 surface-mount package. This package saves space on circuit boards. It’s designed for modern electronics. Assembly is easy with automated tools. This diode regulates voltage effectively. It keeps the voltage steady at about 16 volts. Even if the input voltage changes, the output stays near 16 volts. It protects sensitive parts from voltage spikes. This is crucial in many devices. The diode performs well over a temperature range. It works from -55°C to +150°C. This makes it reliable in different environments. Engineers often use it in power supplies. It helps stabilize the output voltage. It’s also common in voltage reference circuits. Precision matters there. You might find it protecting inputs on microcontrollers. It stops high voltage from damaging chips. Automotive electronics use components like this. Reliability is key in cars. The SOD123 package is standard. Many manufacturers make parts for this footprint. Replacing or sourcing is straightforward. The MMSZ5246B-7 offers good performance. It balances cost and functionality well. It’s a solid choice for 16-volt regulation needs. Consider it for your next design needing stable voltage.

(MMSZ5246B-7 DIODE ZENER 16V 500MW SOD123)

Applications of MMSZ5246B-7 DIODE ZENER 16V 500MW SOD123

The MMSZ5246B-7 diode is a Zener diode. Its voltage is 16V. Its power rating is 500 milliwatts. It comes in a small SOD123 package. This diode is useful for many circuit jobs. One main job is voltage regulation. It keeps the voltage steady at 16V. This is good when you need a stable voltage. It protects sensitive parts. It stops voltage from going too high. You see this in power supplies. You see it in battery chargers too.

Another job is protecting circuits. Voltage spikes happen sometimes. These spikes can break electronic parts. The MMSZ5246B-7 helps here. It limits the voltage spike. It clamps the voltage to 16V. This saves other components. It is often used with inputs and outputs. You might find it on signal lines. It protects against static electricity.

It works well as a voltage reference. Circuits need a known voltage. This diode provides that. It gives a solid 16V reference. This is important for accuracy. You use it in measuring circuits. You use it in control systems. It helps circuits make good decisions.

The diode is also good for clipping signals. Sometimes signals go above a safe level. This diode cuts off the top part. It clips the signal at 16V. This shapes the waveform. It prevents distortion. It is common in audio circuits. It is common in data lines too.

Its small SOD123 size is a big plus. It fits easily onto circuit boards. It saves space. This matters in compact devices. Think about phones or small gadgets. Space is always tight. This diode doesn’t take much room. It is reliable for its size. It handles the 500mW power well.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ5246B-7 DIODE ZENER 16V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ5246B-7 DIODE ZENER 16V 500MW SOD123

What voltage does the MMSZ5246B-7 regulate at?
This diode has a nominal Zener voltage of 16 volts. It keeps this voltage steady when operating in its reverse breakdown region.

How much power can this Zener diode handle?
The MMSZ5246B-7 is rated for a maximum power dissipation of 500 milliwatts. You must stay below this limit to avoid damaging the diode.

Where is this 16V Zener diode typically used?
People often use it in circuits needing voltage regulation. It works well for protecting sensitive components from overvoltage. It sets reference voltages too.

Why does it work backwards?
Zener diodes are designed to operate under reverse bias. They exploit the Zener breakdown effect. This lets them conduct current in reverse to clamp the voltage at 16V.

What size is the SOD123 package?
The SOD123 is a small surface-mount package. It saves space on circuit boards. You solder it directly onto the PCB pads. Its small size suits compact electronic designs.

(MMSZ5246B-7 DIODE ZENER 16V 500MW SOD123)