MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO

Introduction of MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO

The MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO

Compact design: Because no additional isolation components are required, MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SOs are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO)

Specification of MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO

The MMSZ5238ET1 is a Zener diode. It regulates voltage in circuits. This diode maintains a steady voltage level. It protects sensitive components from overvoltage. Engineers use it for voltage reference tasks too. It is designed for surface-mount assembly. The SO package is compact. This saves space on circuit boards. The device is small and efficient.

Its key specification is the Zener voltage. This voltage is 8.7 volts. The voltage is tightly controlled. This ensures reliable performance. The tolerance is acceptable for most uses. The power rating is 500 milliwatts. This tells you the maximum power it can handle. Exceeding this limit damages the diode. Keep the power dissipation below 500mW.

The diode is a two-pin component. The pins are clearly marked. This simplifies circuit design and soldering. It fits standard SO footprint layouts. Manufacturers use it in many applications. It works well in power supplies. It stabilizes output voltages effectively. It protects input stages in circuits. It prevents damage from voltage spikes. It is common in consumer electronics. You find it in telecom equipment too. Automotive systems utilize its stability.

Handling requires care. Follow standard ESD precautions. Observe the polarity during installation. Connect the cathode correctly. Mounting follows standard reflow profiles. Check the datasheet for exact details. Temperature affects performance slightly. The voltage changes with temperature. This change is predictable. Designers account for it. The diode operates reliably within its ratings. It is a dependable choice for 8.7V regulation.

(MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO)

Applications of MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO

The MMSZ5238ET1 diode is a Zener diode. It works at 8.7 volts. It handles 500 milliwatts of power. The diode comes in a small SO package. This package has two pins. Engineers use this diode often. It helps control voltage in circuits. This is voltage regulation.

One main job is keeping a steady voltage. Circuits need stable power. This diode provides that stability. It acts like a pressure valve. It lets extra voltage flow away. This stops the voltage from getting too high. Sensitive parts stay safe. Voltage spikes can damage electronics. This diode protects against those spikes.

Another use is signal clamping. Signals sometimes go outside safe levels. The diode clips these signals. It stops them from exceeding the set voltage. This protects input pins on chips. The diode can also set reference voltages. Some circuits need a precise voltage point. The 8.7V Zener provides a reliable reference.

Its small size is a big advantage. The SO package saves space. It fits easily onto circuit boards. Designers use it in portable gadgets. Phones, tablets, and small sensors often need it. Power supplies for microcontrollers use it too. It ensures the processor gets clean power.

The diode handles moderate power. The 500mW rating is sufficient for many tasks. It works well in low-power designs. Battery-operated devices benefit from its efficiency. Engineers trust its predictable behavior. The breakdown voltage is stable. It performs reliably under normal conditions. This makes circuit design simpler. You know what the diode will do.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO

What is the MMSZ5238ET1 diode used for?
The MMSZ5238ET1 is an 8.7V Zener diode. It regulates voltage in circuits. You use it to keep a voltage point stable at 8.7 volts. It protects sensitive parts from voltage spikes. It works by allowing current to flow backwards when voltage exceeds 8.7V.

Where do you typically find this diode?
This diode fits well in small electronic devices. It works in power supplies. It protects inputs and outputs on circuit boards. You see it in battery-powered gadgets. It is common in voltage reference circuits. Its small size makes it good for tight spaces.

What is the specific voltage for this Zener?
The MMSZ5238ET1 has a Zener voltage of 8.7 volts. This is its breakdown voltage. The voltage is set during manufacturing. It ensures regulation at this level. It is the key specification for this part.

Why pick this specific Zener diode model?
This model is small. It uses a SOD-123 surface mount package. It handles up to 500 milliwatts of power. It is reliable for common 8.7V needs. It is easy to solder onto boards. It offers good performance for its size.

How do you use this diode correctly?
Connect the diode properly. The cathode (marked band) goes to the higher voltage. The anode connects to ground or lower voltage. You need a resistor in series. This resistor limits the current. Check the datasheet for exact limits. Make sure the voltage stays near 8.7V.

(MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO)