MMSZ5231BT3 DIODE ZENER 5.1V 500MW SOD123

Introduction of MMSZ5231BT3 DIODE ZENER 5.1V 500MW SOD123

The MMSZ5231BT3 DIODE ZENER 5.1V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ5231BT3 DIODE ZENER 5.1V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of MMSZ5231BT3 DIODE ZENER 5.1V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ5231BT3 DIODE ZENER 5.1V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ5231BT3 DIODE ZENER 5.1V 500MW SOD123)

Specification of MMSZ5231BT3 DIODE ZENER 5.1V 500MW SOD123

Right here’s the product description for the MMSZ5231BT3 Zener diode:

The MMSZ5231BT3 is a Zener diode. It gives stable voltage law. Its essential work is maintaining a consistent 5.1 volts across its terminals. This happens even if the current flowing with it alters. It’s made for securing circuits. It likewise establishes accurate voltage reference points. You need this stability in many electronic styles.

Its nominal Zener voltage is 5.1 V. The actual voltage can vary a little. Expect a tolerance of ± 5%. This suggests the voltage might be in between 4.845 V and 5.355 V. It deals with as much as 500 milliwatts (500mW) of power dissipation. That’s enough power for normal defense jobs. It takes care of usual signal degrees well.

The diode is available in the SOD123 surface-mount plan. This is an extremely tiny plastic case. It conserves significant area on your circuit board. The compact dimension is optimal for modern-day electronic devices. Functions fantastic in tight areas. 2 steel terminals protrude for soldering. This package is simple for devices to place quickly throughout manufacturing.

Its optimal reverse leak current is reduced. This is important. It loses less power when obstructing voltage. The diode executes reliably over a basic temperature range. This range covers most running problems. It handles temperatures from -65 ° C to +150 ° C. You can trust its procedure in different settings.

This Zener diode suits power supply protection circuits well. It secures sensitive inputs efficiently. It’s additionally helpful for securing voltage spikes. Use it wherever you require a strong 5.1 V recommendation. Its SOD123 package makes it a preferred choice. Designers usually choose it for space-limited jobs. Bear in mind to stay within its power and current limits. This ensures lengthy life and reliable efficiency. Appropriate heatsinking aids take care of temperature level.

(MMSZ5231BT3 DIODE ZENER 5.1V 500MW SOD123)

Applications of MMSZ5231BT3 DIODE ZENER 5.1V 500MW SOD123

This MMSZ5231BT3 diode offers a steady 5.1 V referral. It’s a Zener diode in a small SOD123 package ranked for 500mW power dissipation. You find it useful in many digital circuits requiring voltage control.

Its main task is voltage guideline. Position it across a power supply line. It holds the voltage stable at 5.1 V. This safeguards delicate parts downstream. It protects against voltage from going expensive. If the input voltage increases above 5.1 V, the diode performs heavily. It secures the voltage successfully. This activity protects components like microcontrollers or sensing units. These parts frequently get damaged by overvoltage.

One more crucial use is securing input/output pins. Connect it between a signal line and ground. It quits voltage spikes. Transient voltage occasions can hurt circuits. This diode takes in that excess energy rapidly. It safeguards your user interface circuits. This is common in communication lines or sensor inputs.

It works well in basic power materials. Use it with a resistor to develop a standard regulated 5.1 V output. This benefits low-power applications. Bear in mind the 500mW limitation. It manages just modest current degrees.

You likewise see it in voltage reference circuits. Its secure 5.1 V break down is predictable. This offers a recognized voltage point. Utilize it for setting limits in comparators. Use it for adjusting basic meters.

The little SOD123 bundle saves space on motherboard. This is important for contemporary, portable tools. Bear in mind heat. Running it near its 500mW maximum creates warmth. Make sure proper board format for warmth dissipation.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ5231BT3 DIODE ZENER 5.1V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ5231BT3 DIODE ZENER 5.1V 500MW SOD123

What’s the MMSZ5231BT3 diode?
This is a Zener diode. Its main job is voltage regulation. It keeps a steady voltage in circuits. This specific part is a 5.1V Zener diode. It handles up to 500mW power. It comes in a tiny SOD123 surface-mount package. It’s common for protecting circuits from voltage spikes.

What voltage does it regulate at?
It regulates at 5.1 volts. This is its Zener voltage. Apply a reverse voltage higher than 5.1V. The diode conducts. It maintains approximately 5.1V across its terminals. This voltage stays stable over a range of currents. It’s ideal for 5V reference points.

How much power can it handle?
This diode can dissipate 500 milliwatts maximum. Never exceed this power limit. Exceeding 500mW causes overheating. Overheating leads to permanent damage. Calculate power: multiply the reverse current by the voltage drop. Keep the result below 500mW. Consider derating for high temperatures.

What package is it in?
It uses the SOD123 surface-mount package. SOD123 is a small plastic case. It has two leads. The package size is very compact. This saves space on circuit boards. SOD123 is standard. It’s easy for automated assembly machines.

Where is this diode typically used?
Use it for voltage regulation in low-power circuits. Protect sensitive components from overvoltage. It works well as a simple voltage reference. Common applications include voltage clamps. Use it in basic voltage regulator circuits. It fits power supplies and signal lines needing 5.1V protection.

(MMSZ5231BT3 DIODE ZENER 5.1V 500MW SOD123)