MMSZ4695T1 DIODE ZENER 8.7V 500MW SOD123

Introduction of MMSZ4695T1 DIODE ZENER 8.7V 500MW SOD123

The MMSZ4695T1 DIODE ZENER 8.7V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ4695T1 DIODE ZENER 8.7V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ4695T1 DIODE ZENER 8.7V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ4695T1 DIODE ZENER 8.7V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ4695T1 DIODE ZENER 8.7V 500MW SOD123)

Specification of MMSZ4695T1 DIODE ZENER 8.7V 500MW SOD123

The MMSZ4695T1 is a Zener diode. It manages voltage. This diode maintains a constant 8.7 volts across its terminals. This voltage is its nominal Zener voltage. The actual voltage may be slightly various. The resistance is plus or minus 5%. So the voltage variety is 8.265 V to 9.135 V. This is very important for precise circuits.

It handles approximately 500 milliwatts of power. This is its maximum power dissipation. You need to not exceed this limitation. Surpassing it can harm the diode. Proper warmth management is necessary. The diode is available in a SOD123 surface install bundle. This package is extremely small. It conserves area on circuit card. It is simple for automatic setting up. The small dimension makes it helpful for modern-day electronic devices.

This diode serves for voltage policy. It protects delicate parts from voltage spikes. It supplies a steady referral voltage. It clamps voltage levels in circuits. You see it in power supplies. It is made use of in communication gadgets. You locate it in automobile electronics. It operates in consumer gizmos. It is trustworthy for lots of applications.

Secret specifications matter for style. The reverse leak current is reduced. It is usually 100 nanoamps at 6 volts. This suggests little squandered power when off. The thermal resistance is 340 levels Celsius per watt. This demonstrates how well heat gets away. The optimum operating temperature level is 150 degrees Celsius. The diode works well within regular limitations. The forward voltage has to do with 1 volt at 200 milliamps. This is standard for silicon diodes.

Handling requirements care. Follow basic ESD preventative measures. Avoid fixed power. Use correct soldering profiles. This ensures lengthy life and integrity. The MMSZ4695T1 is an usual choice. It provides excellent performance for its size.

(MMSZ4695T1 DIODE ZENER 8.7V 500MW SOD123)

Applications of MMSZ4695T1 DIODE ZENER 8.7V 500MW SOD123

The MMSZ4695T1 is a Zener diode. It has a specific break down voltage of 8.7 volts. This diode takes care of up to 500 milliwatts of power. It comes in a little SOD123 surface-mount plan. This size makes it helpful for contemporary electronics where room is tight. This component is essential for controlling voltage in circuits.

One major task is voltage policy. The MMSZ4695T1 keeps a stable 8.7 volts across itself when reverse-biased. This happens even if the input voltage modifications. This is key in power products. It shields delicate parts downstream from seeing excessive voltage. It gives a secure recommendation factor.

An additional critical use is overvoltage defense. Voltages can spike all of a sudden in circuits. These spikes can damage elements. This diode works as a security valve. When voltage surpasses 8.7 volts, the diode conducts heavily. It shunts the excess existing far from the secured element. This clamps the voltage to a much safer degree near 8.7 V.

Voltage securing is a related feature. Often signals require restricting. The MMSZ4695T1 can secure signals to avoid them from exceeding 8.7 volts. This secures inputs on chips. It makes sure signals stay within secure operating limitations. It’s common in information lines and communication interfaces.

This diode is also beneficial for creating a fixed voltage reference. Its stable 8.7 V malfunction supplies a known factor. Circuits compare various other voltages against this referral. This is required for accurate measurements. It’s used in analog-to-digital converters and sensor circuits.

The SOD123 plan is very easy to make use of on circuit card. Its tiny impact saves room. Its style permits effective soldering in computerized assembly. This makes it cost-effective for mass production. Developers like its dependability and efficiency in constricted spaces.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ4695T1 DIODE ZENER 8.7V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ4695T1 DIODE ZENER 8.7V 500MW SOD123

What is the MMSZ4695T1 diode? It is a Zener diode. Its main job is voltage regulation. It keeps a steady voltage in circuits. It does this by allowing current to flow backwards at a specific voltage level.

What is its voltage rating? This diode is set for 8.7 volts. That means it starts conducting significantly in reverse at 8.7V. It clamps the voltage across it to roughly this value. This protects sensitive parts downstream from voltage spikes.

How much power can it handle? The diode is rated for 500 milliwatts. This is its maximum power dissipation. You must not exceed this limit. Exceeding it can damage the diode. Consider the actual current and voltage drop in your circuit. Ensure the power stays under 500mW.

What package is it in? It uses the SOD123 surface-mount package. This is a very small plastic case. It has two leads. The small size saves space on circuit boards. It is designed for automated assembly processes.

Where is this diode typically used? You find it in many common electronic devices. It protects input/output lines. It stabilizes low voltage supplies. It provides a reference voltage. It is common in power management circuits. It is also used in signal conditioning. Its small size makes it good for portable gadgets. Think phones, tablets, sensors. It handles basic voltage regulation tasks reliably.

(MMSZ4695T1 DIODE ZENER 8.7V 500MW SOD123)