MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

Introduction of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

The MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123)

Specification of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

The MMSZ4692ET1 is a Zener diode. It provides stable voltage guideline. Its primary job is maintaining a consistent 6.8 volts. This takes place when it runs in reverse malfunction. Consider it as a pressure safety valve for electrical power.

This certain diode manages a maximum power dissipation of 500 milliwatts. This ranking is very important. It tells you how much power the diode can securely manage. Exceeding this limitation threats damaging the part. Keep its power use listed below 500mW.

The ranked Zener voltage is 6.8 V. There is a resistance. The actual voltage might be in between 6.46 V and 7.14 V. This is a ± 5% tolerance. Expect this variant under examination problems. The examination current is usually 5mA.

Leakage current is low. At voltages listed below 6.8 V, really little reverse existing flows. The maximum leak is 5 microamps at 4V. This is good for efficiency. Less power is wasted when the diode is off.

The diode can be found in a SOD123 surface-mount package. This is extremely little. It conserves room on circuit card. The package is made for automated setting up. It prevails for modern electronics manufacturing.

The tool manages a broad temperature level variety. It works from -65 ° C to +150 ° C. This matches lots of environments. The Zener voltage adjustments slightly with temperature. The temperature coefficient is around +3 mV/ ° C for this voltage. This indicates the voltage enhances a little as it obtains hotter.

Common usages involve safeguarding circuits. It clamps voltage spikes. It maintains power supply outcomes. It supplies a reference voltage. You usually find it protecting sensitive inputs like CMOS logic gates. It stops voltage from going too expensive. It is also used in fundamental power regulation circuits. The 6.8 V degree is useful for lots of low-voltage digital systems.

(MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123)

Applications of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

This MMSZ4692ET1 diode is a Zener kind. It provides a stable 6.8 volts. Designers pick this diode for voltage law. It maintains voltages stable in lots of circuits. Power materials require this security. Battery-powered tools need it too. It manages 500 milliwatts of power. This power rating fits typical electronic devices. It protects sensitive components. It quits voltage spikes from causing damages. Inputs on microcontrollers are susceptible. Sensor inputs can be delicate. This diode shields them. It clamps the voltage safely. It prevents signals from going too high. It prevents signals from going also low. It acts like a voltage reference. Circuits compare voltages against it. Analog-to-digital converters require accurate recommendations. This diode offers a reliable 6.8 V point. Its little SOD123 plan conserves room. Circuit card are commonly crowded. This little dimension fits quickly. Surface-mount assembly is typical. It functions well for portable gadgets. Automotive electronics utilize components such as this. Industrial controls need reputable components. Consumer electronic devices gain from its dimension. It takes care of modest power degrees properly. Designers trust its steady break down voltage. It starts conducting dependably at 6.8 V backwards. This predictable habits is essential. It makes sure consistent circuit procedure. It supplies an easy service for guideline. It gives an inexpensive option for security. It supplies a specific referral voltage. The MMSZ4692ET1 is a functional component.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

What does the MMSZ4692ET1 Zener diode do?
It keeps a steady voltage. It makes sure 6.8 volts stays constant in a circuit. This protects parts from voltage spikes. It acts like a pressure relief valve for electricity.

How precise is the 6.8V rating?
It’s not perfectly exact. The actual voltage changes slightly. It depends on the current flowing through it. It also changes with temperature. Expect it between about 6.46 volts and 7.14 volts typically.

What does the 500mW power rating mean?
This is its maximum power limit. You cannot exceed 500 milliwatts. Calculate power by multiplying voltage drop across it by the current through it. Keep this number below 500mW always.

How do I connect it? Correct polarity matters?
Yes, polarity is critical. Connect it backwards compared to a normal diode. Look for the cathode stripe on the SOD123 package body. Point this stripe towards the higher voltage point in your circuit.

Does heat affect this diode?
Yes, heat matters a lot. Power dissipation creates heat. Too much heat damages the diode. The 500mW rating assumes proper cooling. Ensure the ambient temperature stays within the specified range. Provide enough airflow if needed.

(MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123)