MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

Introduction of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

The MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123)

Specification of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

This diode provides steady 6.8 V voltage guideline. It’s a Zener diode. The MMSZ4692ET1 takes care of up to 500mW power dissipation. The SOD123 surface-mount plan is tiny. This dimension saves room on motherboard. Designers utilize it for voltage referral and defense. It clamps excessive voltage spikes successfully.

The voltage resistance is tight. It remains within ± 5% of 6.8 V. This accuracy is essential for sensitive circuits. Temperature level influences performance. Its voltage adjustments slightly with warm. The specified range is -65 ° C to +150 ° C. It does dependably within this variety.

The SOD123 plan determines 3.6 mm long. Its size is 1.5 mm. Height is 1.1 mm. This portable size matches contemporary electronic devices. It fits densely stuffed PCBs conveniently. Two terminals exist. The cathode end is marked plainly. Proper orientation avoids damages.

Onward voltage is reduced. It enables typical diode transmission. Current flows easily in the forward instructions. Reverse leak is marginal. Power loss stays reduced during operation. This diode functions well for standard law jobs. It safeguards inputs from overvoltage. It establishes secure predisposition points.

Handling requires treatment. Follow standard ESD safety measures. Solder profiles must match specifications. Excess heat hurts the component. Appropriate placing ensures thermal efficiency. The datasheet gives complete setting up details.

(MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123)

Applications of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

The MMSZ4692ET1 is a Zener diode. It manages voltage at 6.8 V. This specific part handles as much as 500 milliwatts of power. It comes in a little SOD123 surface-mount bundle. This saves space on circuit boards.

You utilize this diode primarily for voltage policy. It keeps the voltage consistent at 6.8 V. Circuits require steady voltage to work appropriately. This diode gives that stability. It’s useful when power supplies rise and fall. It prevents downstream components from seeing excessive voltage.

Another key task is circuit defense. Delicate components can be harmed by voltage spikes. This diode secures those spikes. It restricts the voltage to 6.8 V. This protects things like silicon chips or sensors. It imitates a security valve for electricity.

It also works as a voltage recommendation. Some circuits require a specific 6.8 V point to compare versus. This diode provides a stable referral voltage. Its secure breakdown voltage makes it reliable for this. Precision is very important right here.

The 500mW power ranking matters. It informs you the optimum power the diode can securely deal with. You have to stay below this restriction. Surpassing it can ruin the diode. Consider the present flowing through it. The SOD123 bundle prevails. It’s simple to put on boards utilizing computerized setting up. This diode functions well in battery-powered devices. It helps take care of voltage effectively. You locate it securing USB ports. It stabilizes voltage for sensing units. It gives referral factors in power supplies. Its tiny size and reliable efficiency make it prominent. Designers pick it for several small digital gadgets.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

What is the MMSZ4692ET1?
It is a Zener diode. It regulates voltage. Its job is keeping voltage steady at 6.8 volts. It comes in a small SOD123 plastic package.

What are its main features?
Its key specs are the 6.8V Zener voltage. It handles 500 milliwatts of power. The SOD123 case is very small. It has two leads. This size makes it good for tight spaces on circuit boards.

Where is this diode typically used?
It protects circuits. It stops voltage spikes from damaging sensitive parts. It provides a stable 6.8V reference point. You find it in power supplies. You find it in voltage regulators. You find it protecting inputs on various electronic devices.

How do I install it on a circuit board?
Mount it using surface mount technology (SMT). The SOD123 package sits flat on the board. Solder its two leads to the matching PCB pads. Observe the correct polarity. The cathode end has a stripe. This stripe must match the board marking. Wrong polarity prevents it from working.

How do I identify this specific part?
Look for the marking on the diode body. The SOD123 package has a small code printed on it. The code “W7” identifies the MMSZ4692ET1. Check the manufacturer’s datasheet. The datasheet confirms the marking code. It also confirms the electrical characteristics.

(MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123)