MMSZ4683-HE3-08 DIODE ZENER 3V 500MW SOD123

Introduction of MMSZ4683-HE3-08 DIODE ZENER 3V 500MW SOD123

The MMSZ4683-HE3-08 DIODE ZENER 3V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ4683-HE3-08 DIODE ZENER 3V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ4683-HE3-08 DIODE ZENER 3V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ4683-HE3-08 DIODE ZENER 3V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ4683-HE3-08 DIODE ZENER 3V 500MW SOD123)

Specification of MMSZ4683-HE3-08 DIODE ZENER 3V 500MW SOD123

This diode is the MMSZ4683-HE3-08. It is a Zener diode. Zener diodes regulate voltage. They maintain voltage consistent. This set is established for 3 volts. Its bundle kind is SOD-123. This package is tiny. It conserves area on circuit boards.

The diode manages 500 milliwatts of power. This is its optimal power dissipation. Power dissipation issues. It shows how much heat the diode can handle. Exceeding this limitation damages the component. The diode works well within a temperature level range. The array is -65 levels Celsius to +150 degrees Celsius. This covers most typical conditions.

Its Zener voltage is exactly controlled. The voltage is 3 volts. There is a tolerance. The resistance is tight. It is +/- 5%. This indicates the actual voltage stays close to 3 volts. Steady voltage is important for protection. It secures delicate electronic parts. It likewise supplies a secure recommendation voltage.

The diode has low leak current. Leakage current is little when reversed prejudiced listed below the Zener voltage. This improves efficiency. It loses much less power. The diode responds quickly to voltage changes. Its vibrant insusceptibility is reduced. This aids maintain a secure voltage.

Usual usages consist of voltage regulation. It controls voltage in power products. It secures circuits from voltage spikes. It clamps voltage rises. It establishes referral degrees. It stabilizes signals. The little SOD-123 package fits limited areas. It is suitable for contemporary electronics. Surface place innovation utilizes this bundle. Soldering it is simple.

Trick functions are its 3V Zener voltage. Its power rating is 500mW. The package is SOD-123. It offers great stability. It is trusted. It is economical for its efficiency. Designers select it for space-constrained applications requiring exact 3V policy or security.

(MMSZ4683-HE3-08 DIODE ZENER 3V 500MW SOD123)

Applications of MMSZ4683-HE3-08 DIODE ZENER 3V 500MW SOD123

This diode controls voltage. It keeps voltage stable at 3 volts. That’s its main task. Numerous circuits require secure voltage. This diode gives that security. It’s a Zener diode. Zener diodes work in a different way than routine diodes. They carry out present in reverse at a particular voltage. This voltage is the Zener voltage. Here it’s 3 volts.

This part is small. It makes use of the SOD123 bundle. This size conserves space. Tiny gadgets require small components. Phones, tablet computers, and mobile devices make use of components similar to this. It fits conveniently on crowded motherboard.

The diode manages 500 milliwatts of power. This is enough for numerous low-power work. It secures delicate parts. Circuits can get harmed by voltage spikes. This diode clamps those spikes. It stops voltage from going expensive. It shields inputs on chips. It secures results too. Voltage transients are dangerous. This diode takes in that power.

It establishes accurate voltage degrees. Circuits require reference voltages. Sensing units, analog circuits, and power products require recommendations. This diode provides a reputable 3V reference. It’s straightforward and economical.

Voltage guideline is key. Power materials occasionally require fine-tuning. This diode works well in shunt regulators. It gives a stable point. Responses circuits use it. It aids preserve constant voltage.

Portable electronic devices profit considerably. Battery voltage modifications. This diode aids maintain circuits running from batteries. It guarantees various other parts obtain consistent 3V. Signal clipping uses this diode. It limits signal swings to 3V peak-to-peak. Sound and data circuits utilize clipping. It stops distortion. Surge defense is vital. This diode absorbs unexpected power surges. It protects costly components downstream. It’s an usual remedy for ESD security.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ4683-HE3-08 DIODE ZENER 3V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ4683-HE3-08 DIODE ZENER 3V 500MW SOD123

People have questions about the MMSZ4683-HE3-08 diode. These answers cover the basics.

What is the MMSZ4683-HE3-08? It’s a Zener diode. Zener diodes control voltage. They let current flow backwards at a specific voltage. This diode is built for voltage regulation tasks.

What voltage does it regulate? This diode regulates at 3 volts. Its Zener voltage is 3V. The voltage is precise. It’s designed for circuits needing stable 3V reference points.

How much power can it handle? Its maximum power dissipation is 500 milliwatts. This is 0.5 watts. This rating matters for circuit design. Exceeding this power damages the diode. Designers must check the power in their circuit stays below 500mW.

What package is it in? It uses the SOD123 surface-mount package. This package is small. It saves space on circuit boards. The SOD123 is common for diodes. It fits automated assembly processes well.

Where is this diode used? It’s used for voltage clamping. It protects sensitive parts from voltage spikes. It provides voltage references. It stabilizes power supply outputs. You find it in consumer electronics. It appears in communication devices. It works in power management circuits needing 3V regulation.

(MMSZ4683-HE3-08 DIODE ZENER 3V 500MW SOD123)