MMSZ4682T1 DIODE ZENER 2.7V 500MW SOD123

Introduction of MMSZ4682T1 DIODE ZENER 2.7V 500MW SOD123

The MMSZ4682T1 DIODE ZENER 2.7V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ4682T1 DIODE ZENER 2.7V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of MMSZ4682T1 DIODE ZENER 2.7V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ4682T1 DIODE ZENER 2.7V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ4682T1 DIODE ZENER 2.7V 500MW SOD123)

Specification of MMSZ4682T1 DIODE ZENER 2.7V 500MW SOD123

The MMSZ4682T1 is a Zener diode designed for trustworthy voltage law. This component keeps a stable 2.7 V reverse failure voltage. It handles approximately 500 milliwatts of power dissipation. The SOD123 surface-mount bundle keeps it portable for limited areas on motherboard.

Voltage tolerance is limited at ± 5%. This makes sure regular efficiency in your layouts. It runs throughout a broad temperature range from -65 ° C to +150 ° C. This makes it suitable for requiring settings.

Reduced leak current is a vital feature. It remains below 100nA at space temperature level. This protects energy effectiveness. The dynamic insusceptibility continues to be reduced during procedure. Your circuits stay steady under differing loads.

Common uses consist of voltage securing and rise defense. It safeguards sensitive electronic devices from overvoltage spikes. You usually find it in power products and voltage referral circuits. Automotive electronics benefit from its longevity. Portable gadgets utilize it for space cost savings.

Optimum rankings are critical. The peak current is 200mA. Surpassing this might damage the diode. Constantly stay within the 500mW power limit. Thermal resistance is 240 ° C/W. Appropriate warm management avoids overheating.

This diode fits automated assembly procedures. The SOD123 bundle works with basic pick-and-place makers. Soldering follows industry guidelines. Storage problems call for dry settings below 40 ° C.

Handling preventative measures are basic. Stay clear of static discharge throughout setup. Comply with typical ESD methods. Moisture level of sensitivity is level 1. No special drying out is needed prior to use.

This part provides trustworthy efficiency without complexity. Developers choose it for precision and small impact. It integrates conveniently right into brand-new or present tasks.

(MMSZ4682T1 DIODE ZENER 2.7V 500MW SOD123)

Applications of MMSZ4682T1 DIODE ZENER 2.7V 500MW SOD123

The MMSZ4682T1 is a Zener diode. It offers a steady 2.7 V referral voltage. This diode deals with power approximately 500 milliwatts. Its tiny SOD123 plan conserves area on circuit boards. This diode works in many digital designs needing voltage control.

Power products commonly utilize this diode. It controls voltage. It maintains the outcome voltage stable. It avoids voltage spikes from damaging delicate parts. Circuits require secure voltage for dependable procedure. This diode provides that stability at 2.7 V.

Voltage law is its primary work. It clamps voltage to 2.7 V. It shields circuits from overvoltage. If voltage attempts to go above 2.7 V, the diode conducts. It shunts excess existing to ground. This protects transistors or integrated circuits downstream. This is vital in power management.

Signal clipping uses this diode too. Audio circuits limit signal heights. Digital circuits prevent signal overshoot. The diode clips signals at 2.7 V. It makes certain signals remain within safe degrees. This keeps signal honesty.

It functions as an easy voltage recommendation. Circuits compare various other voltages versus this fixed 2.7 V factor. Voltage detectors keep an eye on battery degrees. They cause informs when voltage goes down also low. The secure 2.7 V recommendation makes these detectors precise.

Its tiny size fits compact tools. Mobile gizmos require small parts. Wearable electronics require marginal area. The SOD123 plan is suitable. Its 500mW power rating is enough for these low-power applications. It takes care of common lots without overheating.

Protection circuits rely on it. It safeguards inputs on microcontrollers. It shields communication lines like USB or serial ports. Voltage transients can occur. The diode clamps these transients quickly. It prevents damages to pricey chips. This is an affordable protection technique.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ4682T1 DIODE ZENER 2.7V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ4682T1 DIODE ZENER 2.7V 500MW SOD123

What is the MMSZ4682T1 diode used for? It is a Zener diode. It regulates voltage in circuits. It protects components from voltage spikes. It maintains a stable voltage level. It works well in power supplies and voltage reference applications. What does the 2.7V rating mean? This is the Zener voltage. The diode starts conducting at 2.7 volts. It keeps the voltage steady at this level. It handles reverse bias conditions effectively. This is critical for precision circuits. What is the 500mW power rating? This is the maximum power the diode can dissipate. Exceeding this causes overheating. It might damage the diode permanently. Calculate power using voltage and current. Stay below 500 milliwatts for safety. What package does it use? It comes in a SOD123 surface-mount package. This package is small and lightweight. It fits compact circuit boards easily. Automated assembly processes handle it efficiently. It saves space in modern electronics. How do I select this diode? Confirm your circuit needs 2.7V regulation. Check the power dissipation requirements match 500mW. Ensure the SOD123 size suits your PCB layout. Compare specifications like tolerance and temperature coefficient. Verify availability for your production needs.

(MMSZ4682T1 DIODE ZENER 2.7V 500MW SOD123)