MM5Z24VT1 DIODE ZENER 100MW 24V SOD523

Introduction of MM5Z24VT1 DIODE ZENER 100MW 24V SOD523

The MM5Z24VT1 DIODE ZENER 100MW 24V SOD523 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MM5Z24VT1 DIODE ZENER 100MW 24V SOD523 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MM5Z24VT1 DIODE ZENER 100MW 24V SOD523

Compact design: Because no additional isolation components are required, MM5Z24VT1 DIODE ZENER 100MW 24V SOD523s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MM5Z24VT1 DIODE ZENER 100MW 24V SOD523)

Specification of MM5Z24VT1 DIODE ZENER 100MW 24V SOD523

This MM5Z24VT1 diode is a Zener diode. Its main job is voltage regulation. It keeps a steady voltage across itself when reverse-biased. The target voltage here is 24 volts. This is its nominal Zener voltage, or Vz. The actual voltage might be slightly different. It typically falls between 22.8 volts and 25.2 volts. This variation is normal for these components.

The diode handles a continuous power dissipation of 100 milliwatts. This power rating is crucial. Exceeding it can damage the diode. It comes in a very small SOD523 surface-mount package. This tiny size makes it perfect for modern electronics. It saves valuable space on circuit boards. You’ll find it used in portable gadgets and other compact devices.

Electrical characteristics matter. The reverse leakage current, Ir, is very low. It’s typically just 0.1 microamps at 19 volts. This means almost no wasted current before it starts regulating. The maximum dynamic impedance, Zzt, is 90 ohms at the test current. A lower impedance generally means better voltage control. The test current, Izt, is 5 milliamps. This is the current where the specified Zener voltage is measured.

Its thermal resistance is 800°C/W. This number tells you how well heat escapes from the junction. A lower number is better for heat flow. The diode works fine in temperatures from -55°C to +150°C. This covers most normal operating conditions. It stores safely between -55°C and +150°C.

People use this diode in many circuits. It protects sensitive inputs from voltage spikes. It sets reference voltages accurately. It regulates voltage in low-power supplies. It clamps signals to safe levels. Its small size and reliable performance make it a popular choice. It works well in battery-powered devices. It is common in sensors, communication modules, and control circuits.

(MM5Z24VT1 DIODE ZENER 100MW 24V SOD523)

Applications of MM5Z24VT1 DIODE ZENER 100MW 24V SOD523

The MM5Z24VT1 is a Zener diode. It provides a stable 24V reference voltage. This voltage regulation happens in reverse bias mode. The diode handles up to 100 milliwatts of power. Its small SOD523 package saves board space. This size suits modern electronics well.

Engineers use this diode often for voltage regulation. It keeps a steady 24V output even if the input voltage changes slightly. This stability is important. It protects sensitive circuits downstream. Power supplies and sensor circuits benefit from this.

Voltage clamping is another key job. The MM5Z24VT1 clamps voltage spikes to 24V. This prevents damage. Surge protection circuits rely on this clamping action. It shields microcontrollers and other ICs from unexpected high voltage events. Signal lines use it for protection too.

The diode also serves as a simple voltage reference. Circuits needing a precise 24V point use it. This is cheaper than complex reference ICs. It works well in basic comparator circuits or setting thresholds. Accuracy is good enough for many designs.

Its tiny SOD523 package is a major advantage. This surface-mount device fits densely packed PCBs. Automated assembly handles it easily. The small size reduces parasitic effects. High-frequency applications appreciate this.

Remember the 100mW power limit. This restricts the maximum current it can handle. Calculate the current carefully. Use a series resistor to limit current. Exceeding the power rating destroys the diode. Thermal management is less critical but still needed for reliability. Choose the right resistor value based on your supply voltage.

This diode works in battery-powered devices. Its low leakage current helps save power. Reverse leakage is minimal. This preserves battery life. Portable gadgets and IoT sensors often use components like this.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MM5Z24VT1 DIODE ZENER 100MW 24V SOD523, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MM5Z24VT1 DIODE ZENER 100MW 24V SOD523

The MM5Z24VT1 is a Zener diode. It handles 100 milliwatts of power. Its voltage rating is 24 volts. The package type is SOD523. This diode controls voltage in circuits.

What does this diode do? It maintains a steady 24V output. It protects sensitive parts from voltage spikes. Think of it as a safety valve for electricity.

What are its main specs? Power dissipation is 100mW. Zener voltage is 24V. The SOD523 package is tiny. This saves space on circuit boards.

Where is it typically used? You find it in portable gadgets. Examples include smartphones and tablets. It also works in power adapters. Voltage regulators need it too.

Why choose this diode? Its small size fits compact designs. It uses very little power. Performance stays reliable under stress. It’s affordable for bulk projects.

How should you store it? Keep it in anti-static bags. Avoid moisture. Handle it with grounded tools. Static electricity can damage it.

This diode suits automated assembly. It withstands soldering heat well. Follow the datasheet for exact mounting steps.

(MM5Z24VT1 DIODE ZENER 100MW 24V SOD523)