MM1W24 DIODE ZENER 24V 1W SOD-123

Introduction of MM1W24 DIODE ZENER 24V 1W SOD-123

The MM1W24 DIODE ZENER 24V 1W SOD-123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MM1W24 DIODE ZENER 24V 1W SOD-123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MM1W24 DIODE ZENER 24V 1W SOD-123

Compact design: Because no additional isolation components are required, MM1W24 DIODE ZENER 24V 1W SOD-123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MM1W24 DIODE ZENER 24V 1W SOD-123)

Specification of MM1W24 DIODE ZENER 24V 1W SOD-123

This diode is a Zener type. It regulates voltage. The specific voltage is 24 volts. It handles 1 watt of power. This power rating is important. It shows how much energy the diode can safely manage. The diode comes in a SOD-123 package. This package is very small. It saves space on circuit boards. Many engineers like this small size. It fits easily into tight designs. The SOD-123 package is surface-mount. This means it mounts directly onto the board. You solder it to pads. This is common for modern electronics. The diode has good stability. Its voltage stays steady under different conditions. This is key for reliable circuits. The voltage tolerance is usually ±5%. This means the actual voltage might be slightly different. It could be 22.8 volts or 25.2 volts. The diode works well for voltage regulation. You often find it in power supplies. It helps keep output voltage constant. It is also good for voltage clamping. This protects sensitive parts from high voltage spikes. The diode has a typical leakage current. This leakage is very low when operating below its breakdown voltage. The breakdown voltage is the 24V point. The diode starts conducting significantly at this voltage. The diode handles reverse current flow at this voltage. It maintains the voltage across it. The maximum power dissipation is 1 watt. Exceeding this wattage can damage the diode. Heat builds up too much. Proper heat management is necessary. The diode works within a certain temperature range. The storage temperature range is usually wider. The operating temperature range is narrower. Always check the datasheet for exact limits. The SOD-123 package dimensions are standard. The length is about 2.7 millimeters. The width is about 1.7 millimeters. The height is about 1.0 millimeters. These dimensions help for PCB layout planning. The diode has two terminals. These are the anode and cathode. Polarity matters during installation. Installing it backward won’t work correctly. This Zener diode is a common part. It is useful for many electronic applications. Its combination of voltage, power, and size is popular. It provides reliable voltage control.

(MM1W24 DIODE ZENER 24V 1W SOD-123)

Applications of MM1W24 DIODE ZENER 24V 1W SOD-123

The MM1W24 diode is a Zener diode. It handles 24 volts and 1 watt of power. Its small SOD-123 package fits easily onto circuit boards. This diode is useful for several tasks. One main job is voltage regulation. Sometimes a circuit gets too much voltage. This diode helps fix that. When the voltage tries to go above 24 volts, the diode starts conducting heavily. It pulls the voltage down. It keeps the voltage steady at 24 volts. This protects sensitive parts. It stops them from getting damaged by high voltage. Another important use is surge protection. Electrical spikes happen. Power surges can occur. These spikes can harm electronics. The MM1W24 acts like a safety valve. It clamps the voltage spike to 24 volts. It absorbs the extra energy. This protects the whole circuit. Engineers also use this diode as a voltage reference. Some circuits need a stable voltage to compare against. The 24V Zener voltage provides that stable point. It makes sure measurements are accurate. Its 1-watt rating gives good power handling. This means it can manage more energy than lower-rated diodes. The small size is a big advantage. It saves space on crowded circuit boards. You see it used in power supplies often. It stabilizes the output voltage. It protects against input surges. It appears in automotive electronics too. Cars have variable voltages. This diode helps keep things stable. It also finds use in communication equipment. Precise voltage references are needed there. It is a reliable and common component. Its specific characteristics make it suitable for these tasks.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MM1W24 DIODE ZENER 24V 1W SOD-123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MM1W24 DIODE ZENER 24V 1W SOD-123

What is the MM1W24 diode?
The MM1W24 is a Zener diode. It regulates voltage. This diode keeps the voltage steady at 24 volts.

What does this diode do?
This diode clamps voltage. It stops voltage from going above 24 volts. It protects sensitive parts in circuits. Too much voltage can damage parts. This diode prevents that damage.

Why is the SOD-123 package important?
The SOD-123 is a small surface-mount package. It saves space on circuit boards. Many modern electronics need small parts. This size fits well. It is easy to place using machines.

What does the 1W rating mean?
The 1W rating shows its power handling. It can safely handle up to 1 watt of power. Use it within this limit. Going over 1 watt can destroy the diode. Check the circuit’s current.

Where do you use this diode?
Use it in voltage regulation circuits. It is common in power supplies. Protect inputs or outputs from surges. Stabilize reference voltages. Find it in many electronic devices.

(MM1W24 DIODE ZENER 24V 1W SOD-123)