KDZVTR10B DIODE ZENER 10.6V 1W PMDU

Introduction of KDZVTR10B DIODE ZENER 10.6V 1W PMDU

The KDZVTR10B DIODE ZENER 10.6V 1W PMDU is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, KDZVTR10B DIODE ZENER 10.6V 1W PMDU does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of KDZVTR10B DIODE ZENER 10.6V 1W PMDU

Compact design: Because no additional isolation components are required, KDZVTR10B DIODE ZENER 10.6V 1W PMDUs are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(KDZVTR10B DIODE ZENER 10.6V 1W PMDU)

Specification of KDZVTR10B DIODE ZENER 10.6V 1W PMDU

This KDZVTR10B is a Zener diode. It handles 1 watt of power. Its key job is voltage regulation. It keeps voltage steady at 10.6 volts. This specific voltage is its Zener voltage. It’s designed to work in reverse bias mode. That means it conducts current backwards when voltage hits 10.6V. This action clamps the voltage. It prevents the voltage from going higher. This protects other parts in the circuit.

The diode comes in a PMDU package. This is a surface-mount package. It has a small size. This saves space on circuit boards. The compact design is good for modern electronics. It allows for dense component placement. This diode is reliable for regulating voltage. Engineers use it for precise voltage references. It also protects against voltage spikes. You find it in power supplies often. It stabilizes output voltages there.

It helps safeguard sensitive components. Voltage surges can damage parts. This diode prevents that damage. It acts like a pressure valve for electricity. When voltage gets too high, it turns on. It then absorbs the excess energy. This keeps the voltage at a safe level. The 1W rating shows its power dissipation limit. It can handle a fair amount of energy. This makes it suitable for many applications. Circuit designers choose it for stability. It provides consistent performance. Its characteristics are well-defined. This predictability is important.

Handling is straightforward. Follow standard soldering practices. Avoid excessive heat during assembly. Observe polarity during installation. The cathode end is marked. Connecting it backwards won’t work correctly. Check the datasheet for exact details. The specifications are clear. It performs reliably under normal conditions. This diode is a solid choice for voltage control needs.

(KDZVTR10B DIODE ZENER 10.6V 1W PMDU)

Applications of KDZVTR10B DIODE ZENER 10.6V 1W PMDU

The KDZVTR10B is a Zener diode. It handles 10.6 volts and 1 watt of power. Its PMDU package is small. This diode controls voltage well. It’s useful in many electronic jobs.

One big job is keeping voltage steady. Circuits need stable power. This diode helps here. If the voltage tries to go too high, the diode steps in. It pulls extra voltage away. This keeps the voltage at 10.6 volts. It protects sensitive parts like microchips. Power supplies use this feature. Voltage regulators need it too.

Another job is stopping voltage spikes. Electrical noise happens. Surges can damage parts. This diode protects circuits. It acts fast. When a spike hits, the diode turns on quickly. It gives the extra voltage a safe path to the ground. This saves other parts. You see this in power lines. You see it in input stages of devices. It stops damage from sudden jumps in power.

It also gives a fixed voltage point. Some circuits need a precise voltage to compare against. This diode provides a solid 10.6 volt reference. Sensors and measurement tools need this. It helps circuits make accurate decisions. It keeps things working right.

It can clamp signals too. Sometimes signals need limiting. They should not go above a certain level. This diode stops signals going past 10.6 volts. It clips the top off the signal. This is good for audio circuits. It is good for protecting inputs. It keeps signals within safe bounds.

This diode is reliable. Its small size fits many boards. It works for power control. It works for protection. It works for reference points.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality KDZVTR10B DIODE ZENER 10.6V 1W PMDU, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of KDZVTR10B DIODE ZENER 10.6V 1W PMDU

What is the KDZVTR10B diode used for?
The KDZVTR10B diode keeps voltage steady. It is a Zener diode. It holds the voltage at 10.6 volts. It protects other parts in your circuit from too much voltage. Put it in reverse bias. It stops voltage from going higher than 10.6 volts.

What are the main specifications of the KDZVTR10B?
This diode has a Zener voltage of 10.6 volts. It is rated for 1 watt of power. That means it can handle 1 watt of heat. It comes in a PMDU package. This is a common surface-mount type. The PMDU package is small. It is easy to use on circuit boards.

Where can I use the KDZVTR10B diode?
Use this diode in power supplies. It helps make a stable voltage. Use it as a voltage reference. Other circuits can compare to this steady 10.6V. Use it for protecting sensitive electronics. It clamps high voltage spikes. It is good for many electronic devices.

How is a Zener diode different from a regular diode?
A regular diode blocks current one way. It lets current flow forward easily. A Zener diode works differently. It blocks current forward like a normal diode. But it also works backwards. When the voltage hits 10.6V backwards, it starts to conduct. This keeps the voltage at 10.6V.

What should I watch for when using the KDZVTR10B?
Watch the power dissipation. Do not exceed 1 watt. Too much power makes it too hot. It can break. Watch the current. The current must be right for the voltage drop. Calculate the current limit. Remember the power rating depends on temperature. Keep it cool enough.

(KDZVTR10B DIODE ZENER 10.6V 1W PMDU)