DZ9F12S92-7 DIODE ZENER 12V 200MW SOD923

Introduction of DZ9F12S92-7 DIODE ZENER 12V 200MW SOD923

The DZ9F12S92-7 DIODE ZENER 12V 200MW SOD923 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, DZ9F12S92-7 DIODE ZENER 12V 200MW SOD923 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of DZ9F12S92-7 DIODE ZENER 12V 200MW SOD923

Compact design: Because no additional isolation components are required, DZ9F12S92-7 DIODE ZENER 12V 200MW SOD923s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(DZ9F12S92-7 DIODE ZENER 12V 200MW SOD923)

Specification of DZ9F12S92-7 DIODE ZENER 12V 200MW SOD923

This diode is the DZ9F12S92-7. It’s a Zener diode. Zener diodes control voltage. This one is set for 12 volts. That’s its Zener voltage. It handles 200 milliwatts of power. This power rating is important. The diode shouldn’t exceed it. The package type is SOD923. This is an extremely small surface-mount package. It saves space on circuit boards. Two terminals connect it. You solder it directly to the board. This diode regulates voltage. It keeps the voltage steady at 12V. It does this in reverse bias. Forward bias acts like a normal diode. It protects circuits from voltage spikes. It provides a stable reference voltage. You find it in power supplies. It’s common in voltage regulators. Precise voltage control is needed there. It works in battery-powered devices. Small size is crucial there. The tight voltage tolerance matters. Circuits rely on accurate voltage. This diode offers that precision. The SOD923 package is fragile. Handle it carefully during assembly. Use proper soldering techniques. Avoid applying too much heat. Check the manufacturer’s datasheet. Confirm exact specifications before using it. The datasheet has all details. It lists maximum ratings clearly. It shows the voltage tolerance range. This diode suits many applications. It fits where space is limited. It works where 12V regulation is required. It manages power dissipation well. The 200mW rating is sufficient for many tasks. Choose this part for its size. Pick it for its voltage accuracy.

(DZ9F12S92-7 DIODE ZENER 12V 200MW SOD923)

Applications of DZ9F12S92-7 DIODE ZENER 12V 200MW SOD923

The DZ9F12S92-7 is a Zener diode. It regulates voltage at 12 volts. This diode handles up to 200 milliwatts of power. It comes in a very small SOD923 package. Engineers use it for specific jobs.

Its main job is voltage regulation. It keeps a steady 12V output. It does this even if the input voltage changes. This is good for protecting sensitive parts. Circuits need stable voltage to work right. This diode provides that stability.

It also protects against voltage spikes. Sudden high voltage can break electronics. This diode acts like a safety valve. If voltage jumps above 12V, the diode turns on. It pulls the voltage back down. This shields other parts from damage.

This diode serves as a voltage reference too. Some circuits need a precise 12V point to compare against. The Zener voltage gives a reliable reference. This is useful in measurement tools. It helps control circuits work accurately.

Its tiny size is a big advantage. The SOD923 package saves space on circuit boards. This matters for small gadgets like phones. It also works in wearable tech. Designers use it where room is tight.

It fits well into power management circuits. Battery-powered devices need efficient voltage control. This diode helps manage battery voltage. It ensures downstream parts get clean 12V power. This extends battery life.

You find it in various electronic products. It helps power sensors and microcontrollers. It protects communication lines like USB. It stabilizes voltage for display screens. Its job is always about controlling voltage.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality DZ9F12S92-7 DIODE ZENER 12V 200MW SOD923, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of DZ9F12S92-7 DIODE ZENER 12V 200MW SOD923

What is the DZ9F12S92-7?
The DZ9F12S92-7 is a Zener diode. It is a type of semiconductor diode. This specific diode is designed to regulate voltage. It provides a stable reference voltage in electronic circuits.

What does this Zener diode do?
Its main job is voltage regulation. It allows current to flow backwards once a specific voltage is reached. This voltage is its breakdown voltage. It clamps the voltage across it to a constant level. This protects other components from voltage spikes. It stabilizes the voltage in a circuit.

What is its voltage rating?
This diode has a nominal Zener voltage of 12 volts. This means it starts conducting significantly in reverse bias at around 12 volts. The voltage is precise. It is suitable for circuits needing 12V regulation. Check the datasheet for exact tolerance values.

How much power can it handle?
It has a power dissipation rating of 200 milliwatts. This is the maximum power it can safely handle without damage. Do not exceed this power limit. Exceeding it causes overheating. Overheating leads to permanent failure. Design your circuit accordingly.

What package does it use?
It comes in an SOD923 surface-mount package. This is an extremely small package. It is designed for automated assembly on circuit boards. Its tiny size saves space. This makes it ideal for compact electronic devices. You need proper soldering techniques for it.

(DZ9F12S92-7 DIODE ZENER 12V 200MW SOD923)