DFLZ10-7 DIODE ZENER 10V 1W POWERDI123

Introduction of DFLZ10-7 DIODE ZENER 10V 1W POWERDI123

The DFLZ10-7 DIODE ZENER 10V 1W POWERDI123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, DFLZ10-7 DIODE ZENER 10V 1W POWERDI123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of DFLZ10-7 DIODE ZENER 10V 1W POWERDI123

Compact design: Because no additional isolation components are required, DFLZ10-7 DIODE ZENER 10V 1W POWERDI123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(DFLZ10-7 DIODE ZENER 10V 1W POWERDI123)

Specification of DFLZ10-7 DIODE ZENER 10V 1W POWERDI123

The DFLZ10-7 Zener diode delivers stable voltage guideline for electronic circuits. It runs at a nominal zener voltage of 10V with a tolerance of ± 5%. This guarantees accurate control in applications calling for constant recommendation voltages. The tool handles a power dissipation of 1W, making it suitable for medium-power situations. Its portable PowerDI123 surface-mount plan conserves space on PCBs. The small form aspect fits modern electronic devices where miniaturization is critical.

This diode keeps dependable efficiency under reverse bias problems. It clamps voltage spikes properly, protecting sensitive components from rises. The zener voltage stays steady throughout a broad temperature range from -55 ° C to +150 ° C. Engineers trust fund it for constant behavior in severe settings. Reduced leakage present improves effectiveness in low-power settings.

The DFLZ10-7 is perfect for voltage stabilization in power products, voltage references, and signal conditioning circuits. It functions well in consumer electronics, automobile systems, and industrial controls. The PowerDI123 plan supports automated setting up processes, minimizing manufacturing prices. Its lead-free construction follow global ecological criteria.

Thermal monitoring is streamlined via the bundle’s reliable warm dissipation. This stops getting too hot during prolonged procedure. The diode’s robust construction stands up to mechanical tension and resonance. Electric attributes continue to be steady over long-term usage.

Key specs include an optimal reverse leak current of 5µA at 7.6 V. The vibrant insusceptibility is 10Ω at the small zener voltage. Storage temperature level ranges match operational restrictions for simple handling. Moisture sensitivity degree (MSL) is rated at Level 1, guaranteeing dependability in damp problems.

Developers choose the DFLZ10-7 for its equilibrium of efficiency and cost. It changes bulkier components without jeopardizing functionality. Compatibility with common reflow soldering methods quicken manufacturing. The diode’s datasheet provides detailed application guidelines.

Regular usages consist of overvoltage security in USB ports, voltage clamping in sensing unit interfaces, and policy in battery-powered gadgets. Its adaptability supports both analog and electronic circuits. The part is offered in tape-and-reel product packaging for high-volume orders.

(DFLZ10-7 DIODE ZENER 10V 1W POWERDI123)

Applications of DFLZ10-7 DIODE ZENER 10V 1W POWERDI123

The DFLZ10-7 Zener diode provides secure voltage regulation in electronic circuits. This diode operates at 10V with a 1W power ranking. Its portable POWERDI123 package suits space-sensitive layouts. Designers utilize it extensively for voltage stabilization. It maintains a steady 10V output also when input voltages vary. This makes it suitable for protecting sensitive parts.

The diode manages surge security successfully. It secures voltage spikes throughout power rises. This protects against damages to connected gadgets. Power products frequently integrate this diode for safety and security. Circuits exposed to unexpected voltage modifications benefit from its quick response.

Circuit protection is another essential application. The diode works in reverse prejudice mode. Excess current flows via it as opposed to crucial parts. This guards microcontrollers or sensing units from overloads. Reverse polarity security is also achievable. Putting the diode throughout the power supply reroutes reverse currents.

Mobile electronics rely on the diode’s tiny dimension. The POWERDI123 package fits easily into tight layouts. Instruments like wearables or portable devices use it for voltage control. Its low profile makes certain very little influence on item layout.

Thermal performance matters in high-power circumstances. The diode’s 1W ranking allows handling moderate currents. Its construction dissipates warm effectively. This reduces overheating dangers during long term use.

Voltage resistance is vital for accuracy. The DFLZ10-7 keeps a ± 5% resistance under regular conditions. This precision ensures constant efficiency across temperature levels. Secure operation between -55 ° C and 150 ° C fits rough environments.

Silicon-based building and construction boosts reliability. The diode uses low leak current. This lessens power loss in standby modes. Rapid changing speeds boost response to transient voltages.

Automotive systems make use of the diode for voltage stabilization. It safeguards onboard electronics from alternator surges. Commercial equipment utilizes it for electric motor control circuits. The diode’s tough design endures resonances and temperature changes.

Setup requires correct polarity alignment. Reverse links disable its safety functions. Warmth management remains essential at maximum lots. Sufficient PCB spacing or heatsinks enhance performance.

Compatibility with automated setting up processes speeds up production. The diode’s conventional bundle deals with pick-and-place machines. This reduces manufacturing time for high-volume tasks.

Technical requirements match market requirements. RoHS conformity ensures ecological safety. Lasting accessibility sustains item lifecycle preparation. Equipping the diode simplifies repairs or upgrades.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality DFLZ10-7 DIODE ZENER 10V 1W POWERDI123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of DFLZ10-7 DIODE ZENER 10V 1W POWERDI123

What is the DFLZ10-7 diode?
The DFLZ10-7 is a Zener diode designed for voltage regulation. It provides a stable 10V reverse breakdown voltage. The device handles up to 1W power dissipation. It comes in a compact PowerDI123 surface-mount package. This makes it suitable for space-constrained applications.

How does the Zener voltage work?
The Zener voltage is 10V. When reverse-biased, it maintains this voltage across its terminals. This occurs even if input voltage or load current changes. It protects circuits from overvoltage. It ensures stable operation by clamping voltage spikes.

What is the maximum power it can handle?
The diode supports 1W power dissipation. Exceeding this limit risks damage. Power equals voltage multiplied by current. At 10V, the maximum safe current is 100mA. Proper heat management is necessary. Higher ambient temperatures reduce its capacity.

Why use the PowerDI123 package?
The PowerDI123 package is small. It saves board space in modern electronics. It offers better thermal performance than older packages. The design improves heat dissipation. This supports higher reliability in tight layouts. Surface-mount assembly speeds up production.

Where is this diode commonly used?
It is used in voltage regulation tasks. Examples include power supplies, voltage references, surge protectors. It stabilizes voltages in automotive electronics, industrial controls. It protects sensitive components from voltage fluctuations. It serves as a low-cost solution for precise voltage control.

How to ensure proper operation?
Connect it in reverse bias. Use a current-limiting resistor in series. Calculate resistor value based on input voltage. Ensure power dissipation stays below 1W. Check operating temperature stays within datasheet limits. Test circuits under expected load conditions.

(DFLZ10-7 DIODE ZENER 10V 1W POWERDI123)