BZT52B10 DIODE ZENER 10V 500mW SOD-123

Introduction of BZT52B10 DIODE ZENER 10V 500mW SOD-123

The BZT52B10 DIODE ZENER 10V 500mW SOD-123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, BZT52B10 DIODE ZENER 10V 500mW SOD-123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of BZT52B10 DIODE ZENER 10V 500mW SOD-123

Compact design: Because no additional isolation components are required, BZT52B10 DIODE ZENER 10V 500mW SOD-123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(BZT52B10 DIODE ZENER 10V 500mW SOD-123)

Specification of BZT52B10 DIODE ZENER 10V 500mW SOD-123

The BZT52B10 is a Zener diode. It regulates voltage at 10 volts. This component handles as much as 500 milliwatts of power. Its tiny SOD-123 surface area place bundle saves board space. Developers use it extensively for voltage stablizing.

The nominal Zener voltage is 10V. This voltage is measured at the examination point. The real voltage can differ slightly. It ranges from 9.4 V to 10.6 V. This resistance is acceptable for numerous circuits. The diode keeps this voltage across its terminals when reverse-biased correctly.

Power dissipation is crucial. The maximum is 500mW. Staying below this avoids getting too hot. It makes sure reputable operation. The diode needs appropriate warmth sinking on the PCB. The leads conduct heat away. Exceeding the power limit damages the gadget.

The SOD-123 package is really small. It fits largely inhabited boards. This bundle is made for automated assembly. Soldering is straightforward. It works well with reflow and wave processes. Board design is simple.

The diode runs over a wide temperature range. It operates from -65 ° C to +150 ° C. This fits most environments. The diode takes care of short temperature spikes. Constant heat reduces life expectancy.

Leak current is low. It remains below 100 nanoamps at low reverse voltage. This lessens squandered power. Dynamic resistance is also low. This keeps the controlled voltage steady under altering lots problems. Sudden lots shifts don’t cause huge voltage swings.

This diode shields delicate components. It secures voltage spikes on signal lines. It offers a secure recommendation voltage. Power materials use it for fundamental regulation. Easy circuits take advantage of its stability. The BZT52B10 provides a reputable remedy. It stabilizes performance, dimension, and price. Engineers trust it for daily voltage control tasks.

(BZT52B10 DIODE ZENER 10V 500mW SOD-123)

Applications of BZT52B10 DIODE ZENER 10V 500mW SOD-123

The BZT52B10 Zener diode is a dependable part for several circuits. It offers a stable 10-volt recommendation. This diode works well in voltage guideline tasks. It maintains the voltage constant at 10 volts even if the input voltage changes or the tons changes. You commonly find it protecting sensitive inputs. It stops voltage spikes from harming other components. If a spike occurs, the Zener diode conducts the added current safely to ground.

This diode takes care of up to 500 milliwatts of power. Its SOD-123 plan is very tiny. This small dimension conserves space on circuit card. It benefits modern-day, portable electronics. Think smart phones, sensors, or portable gizmos needing tight voltage control in a tiny area.

The BZT52B10 is also useful as a basic voltage referral. Circuits requiring a known 10V factor can use it. It’s less expensive than complex reference chips for standard needs. Developers like its simplicity and dependability. It works in power products, audio equipment, and auto electronics. It clamps signals to safe degrees.

You can use it to set voltage levels in logic circuits. It guarantees signals do not go too high. It secures microcontroller pins from overvoltage. This diode is steady and takes care of regular operating temperature levels well. Its efficiency stays constant. Engineers choose it for its tried and tested reliability and affordable. It’s a conventional remedy for 10V guideline and security. Supply is generally easy to find from major distributors.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality BZT52B10 DIODE ZENER 10V 500mW SOD-123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of BZT52B10 DIODE ZENER 10V 500mW SOD-123

What is the BZT52B10 Zener diode used for?
This diode maintains a steady 10V voltage in circuits. It protects parts from voltage spikes. Use it in power supplies or voltage regulators.

What does the 10V and 500mW rating mean?
The 10V is the Zener voltage. It keeps voltage at 10V. The 500mW is the power limit. Exceeding this damages the diode.

What is the SOD-123 package?
SOD-123 is a tiny surface-mount package. It saves space on circuit boards. It suits automated manufacturing.

How do I connect the BZT52B10 in my circuit?
Connect it reverse-biased. Link the cathode to the positive side. The anode goes to ground. Add a resistor to limit current.

What are the key features of the BZT52B10?
It offers precise voltage control. It handles 500mW power. The small SOD-123 fits tight spaces. It’s reliable for basic protection.

(BZT52B10 DIODE ZENER 10V 500mW SOD-123)