BZT52B10 DIODE ZENER 10V 500mW SOD-123

Overview of Diode Modules and Thyristor Modules Non-Isolated Type

Diode modules and thyristor modules are integral components in power electronics, used for rectification, switching, and regulation of electrical power. They play a crucial role in converting AC to DC, controlling motor speeds, and managing power flow in various applications. Non-isolated types of these modules mean that there is no galvanic isolation between the input and output circuits, which can lead to simpler designs but also requires careful consideration regarding safety and noise suppression.

Features of Diode Modules and Thyristor Modules Non-Isolated Type

For both diode and thyristor modules of the non-isolated type, the key feature is the direct connection between input and output without any form of isolation. This design simplifies the circuitry and reduces cost but necessitates proper grounding and shielding to prevent electrical hazards and electromagnetic interference (EMI). Additionally, non-isolated modules typically offer:

• Direct Coupling: Input and output share a common ground, simplifying installation.
• Cost-Effective: Fewer components required compared to isolated designs.
• Higher Efficiency: Less energy lost due to the absence of an isolation transformer.
• Potential Safety Concerns: Requires strict adherence to safety standards to avoid risks associated with electrical shock.

(BZT52B10 DIODE ZENER 10V 500mW SOD-123)

Specifications of BZT52B10 DIODE ZENER 10V 500mW SOD-123

The BZT52B10 is a Zener diode designed for exact voltage policy jobs. It keeps a stable 10V output throughout different circuit conditions. This component manages up to 500 milliwatts of power dissipation. Its small SOD-123 surface-mount plan conserves beneficial board room. Designers prefer this form factor for contemporary electronics where miniaturization matters.

Voltage guideline is the key feature of this diode. It runs dependably in its break down region at 10 volts. Designers use it as a referral component or voltage clamp. It secures sensitive parts from overvoltage spikes efficiently. The diode does continually in between -55 ° C and +150 ° C. This temperature strength matches automobile and industrial applications.

Key electrical specifications specify its performance. The examination present for 10V zener voltage is generally 5mA. Dynamic resistance continues to be low around 20 ohms. This makes sure minimal voltage change under lots modifications. Reverse leak existing remains listed below 100nA before break down happens. Such specs guarantee stable operation in power materials or battery administration systems.

Surface-mount assembly is simple with the SOD-123 package. The device includes moisture resistance per market criteria. Automated pick-and-place makers handle it efficiently during manufacturing. Its two-pin arrangement streamlines PCB layout design. This diode frequently shows up in portable gizmos and voltage referral modules.

Integrity screening verifies long operational life under regular problems. It withstands typical soldering temperature levels without damages. The glass-passivated silicon chip ensures steady qualities gradually. Developers trust it for cost-sensitive tasks needing trustworthy voltage control.

Applications cover voltage stabilizers and rise protectors. It secures microcontroller inputs from electrical transients. The diode also offers in sensing unit user interfaces calling for consistent referral factors. Power administration circuits gain from its regular 10V limit.

(BZT52B10 DIODE ZENER 10V 500mW SOD-123)

Applications of BZT52B10 DIODE ZENER 10V 500mW SOD-123

This Zener diode, the BZT52B10, provides a stable 10V referral voltage. It deals with approximately 500 milliwatts of power. Its little SOD-123 plan fits conveniently right into tight circuit board spaces. Developers use it widely for precise voltage control. It holds a consistent 10 volts across itself when reverse-biased appropriately. This makes it perfect for regulating voltage in many low-power circuits. You commonly see it establishing referral points for power materials. It makes sure various other parts get a secure, consistent voltage degree.

An additional essential work is securing sensitive digital components. Voltage spikes happen typically in electronics. These abrupt surges can damage components like silicon chips. Placing this Zener diode throughout the supply line assists. When the voltage leaps above 10V, the diode carries out greatly. It draws away the excess energy safely to ground. This action secures the voltage down. It quits the sensitive parts from seeing damaging overvoltage. It’s a simple guard against unanticipated power rises.

Signal clipping is an additional important usage. In some cases you require to limit an electrical signal’s maximum swing. This diode can clip signals at precisely 10 volts. Put it so it carries out when the signal attempts to exceed 10V. It pins the signal height at 10V. This shapes the waveform. It protects against distortion in later amplifier phases. It comes in handy for audio circuits or electronic signal conditioning.

Voltage moving circuits take advantage of this diode too. Combine it with other parts. It aids produce little, exact modifications in DC voltage degrees. This is useful for interfacing different logic families. It makes certain signals match the required input limits. Battery-powered gadgets rely on its security. It provides a fixed voltage referral regardless of battery drainpipe. This aids exact tracking of staying power. Its low leak current benefits effectiveness. It squanders extremely little power when sitting still. The SOD-123 dimension is a large plus for contemporary electronic devices. Phones, wearables, sensors need small parts. This diode supplies efficiency without occupying much space. It functions accurately across a great temperature array.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality BZT52B10 DIODE ZENER 10V 500mW SOD-123, please send us inquiries; we will be here to help you.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

By sea, by air, by express, as customers request.

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of BZT52B10 DIODE ZENER 10V 500mW SOD-123

What is the BZT52B10 Zener diode?
It’s a small electronic part. It controls voltage. This diode keeps a steady 10V output. It works even if the input voltage changes. It’s designed for protecting circuits. It stops voltage spikes from harming sensitive parts. It fits well on modern circuit boards.

What voltage does it regulate?
This diode regulates at 10 volts. It has a specific tolerance. The actual voltage might be slightly higher or lower. The tolerance is usually ±5%. So the voltage stays between 9.5V and 10.5V during normal operation. This precision is important for stable circuits.

How much power can it handle?
The diode handles up to 500 milliwatts (mW) of power. This is its maximum continuous power dissipation. You must not exceed this limit. Exceeding it can destroy the diode. Always check the circuit’s current. Ensure the power stays below 500mW for reliable operation.

How small is the SOD-123 package?
The SOD-123 is very small. It’s a surface-mount package. The diode is about 2.5mm to 2.7mm long. Its width is roughly 1.7mm. This tiny size saves space on the circuit board. It’s perfect for compact devices like phones or laptops.

Where is this diode typically used?
It’s used for voltage regulation. It protects circuits from overvoltage. Common uses include power supplies. It protects input stages of ICs. You find it in consumer electronics. It’s used in automotive electronics. It’s good for battery-powered devices needing stable voltage.

(BZT52B10 DIODE ZENER 10V 500mW SOD-123)