MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

Introduction of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Kaore i rite ki nga waahanga motuhake, MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Ko tenei hoahoa ka ngawari te hanganga ara iahiko, ka whakaiti i te utu, me te whakapai ake i te pai.

 

Features and Benefits of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

Hoahoa kiato: Na te mea kaore e hiahiatia etahi atu waahanga wehe, MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123s are typically smaller and lighter in weight.

Mahi teitei: Ko te iti o te ngaronga o te kaha na te mea ko nga waahanga wehe ka pai ake te pai o te hurihanga.

Utu Iti: Ka whakakorehia nga waahanga wehe utu nui, ka iti ake nga utu hangahanga.

Whakautu Tere: Ko te Diode Whakaora Tere i hangaia (FRD) ka taea te huri tere mai i te kawanatanga ki te ahua aukati, te whakaiti i nga ngaronga whakawhiti.

Te Ti'aturi Nui: Ka whakamahia nga rauemi me nga hangarau matatau hei whakarite kia mau te mahi ahakoa i roto i nga taiao kino.

He ngawari ki te whakauru me te pupuri: Ko nga atanga me nga hononga kua whakaritea hei whakangawari i te tukanga whakaurunga me te whakahaere i nga mahi a muri ake nei.

(MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123)

Specification of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ7V5ET1 is a Zener diode. It offers voltage regulation at 7.5 volts. This component takes care of up to 500 miliwatts o te mana. It makes use of the tiny SOD123 surface-mount package. This size conserves space on modern-day motherboard. The SOD123 style is common and simple to position automatically.

Its key work is keeping a secure 7.5 V recommendation voltage. It does this in reverse prejudice procedure. The voltage tolerance is limited. The nominal Zener voltage (Vz) ko 7.5 V. The real voltage gauged at the test current (Izt) of 5mA falls between 7.13 V me 7.87 V. This accuracy is essential for reliable circuits.

The diode handles an optimal reverse present (Ir) of 100 nanoamps. This reduced leak existing takes place at 4 volts reverse bias. The optimum Zener insusceptibility (Zzt) ko 20 ohms. This impedance is measured at the test current of 5mA. A reduced insusceptibility frequently indicates much better voltage law under changing tons conditions.

The optimal power dissipation (Ptot) is 500mW. This rating is vital for style. Exceeding it harms the diode. The operating temperature level variety is vast. It functions from -65 ° C ki +150 ° C. This makes it ideal for numerous settings. The diode is unidirectional. It conducts present openly in the forward instructions like a standard diode. In reverse bias, it regulates voltage once break down takes place.

Regular uses include voltage clamping. It safeguards sensitive inputs from overvoltage spikes. It functions well as a simple voltage reference. Designers utilize it for waveform shaping. It discovers functions in power supplies and signal conditioning circuits. Its small size and reliable efficiency make it popular. The MMSZ7V5ET1 offers an affordable option for 7.5 V policy requirements. Constantly inspect the datasheet for absolute maximum scores. Make sure appropriate warm dissipation in your design.

(MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123)

Applications of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ7V5ET1 is a 7.5 V Zener diode. It takes care of 500mW power. Its tiny SOD123 bundle fits limited spaces. This diode controls voltage specifically. You can utilize it in numerous circuits.

One primary work is voltage regulation. It maintains a stable 7.5 V output. Position it across a power supply. It clamps the voltage at 7.5 V. This shields delicate parts downstream. It stops voltage spikes. It prevents over-voltage damage. It’s good for protecting inputs on ICs or sensing units. It absorbs unexpected rises quickly.

It also helps signal securing. It quits signals going too expensive. It clips waveforms over 7.5 V. This is useful in audio circuits. It safeguards analog-to-digital converters. It makes sure signals remain within secure restrictions.

Another usage is offering a steady recommendation voltage. You need a known voltage point. This diode gives a set 7.5 V reference. Use it in power supplies. Utilize it in voltage monitors. It aids compare other voltages accurately.

Its little size aids in mobile gadgets. Believe phones, tablet computers, wearables. It fits on crowded circuit card. It saves room. It does not add much weight.

It defends against electrostatic discharge. ESD can fry electronics. This diode diverts the rise harmlessly. Place it near ports. Position it on information lines. It guards ports like USB.

You see it in power management circuits. It stabilizes prejudice factors. It protects low-power microcontrollers. It protects communication lines like I2C or SPI. It makes sure secure operation.

It’s dependable for basic tasks. It’s cost-effective. Its specifications are distinct. It carries out constantly. Engineers trust it for simple security. It uses a solid service without intricacy. It satisfies typical style requirements.

Kōtaha Kamupene

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) Ko tetahi o nga hinonga rangatira mo te hangarau hiko hiko me nga hua hiko, e tino whai waahi ana ki te whakawhanake i nga kaihurihuri ra， whakahurihuri, nga kaiwhakahaere ngaohiko, rūnanga tohatoha, thyristors， kōwae， ngohe， whakamahana, me etahi atu taputapu hiko, semiconductors ranei. Ka whakapau kaha matou ki te whakarato ki nga kaiwhakamahi te kounga teitei, hua pai me te ratonga whai whakaaro.

Ka whakaaehia te utu ma te kaari nama, T/T, Uniana ki te Hauauru, me te Paypal. Ka tukuna e PDDN nga taonga ki nga kaihoko ki tawahi ma te FedEx, DHL, ma te moana, ma te hau ranei. If you want high-quality MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123, tena koa tukuna mai he patai; ka noho matou ki te awhina i a koe.

 

Nga Tikanga Utu

L/C, T/T, Western Union, Paypal, Kaari nama etc.

 

Tukunga

Ma te moana, mā te hau, mā te whakapuaki, kia rite ki te tono a nga kaihoko.

 

Nga Tikanga Rokiroki

1) Rokiroki i roto i te taiao maroke i te pāmahana rūma.

2) A ape i te makuku me te pāmahana teitei.

3) Whakamahia i muri tonu i te whakatuwheratanga o te peeke takai o roto.

5 FAQs of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

What is the MMSZ7V5ET1?
This is a Zener diode. It regulates voltage. Its main job is maintaining a steady 7.5 volts across its terminals. You use it in circuits needing stable voltage.

What does it do?
The diode lets current flow backwards once voltage hits 7.5 volts. This “breakdown” keeps the voltage at 7.5V. Ka tiakina e ia nga waahanga tairongo mai i nga koikoi ngaohiko. It gives a stable reference voltage.

Key specifications?
Its voltage is 7.5 volts. Ko tana whakatauranga mana 500 miliwatt. It comes in a tiny SOD123 surface-mount package. This saves space on circuit boards. Its tolerance is usually ±5%.

Kei hea te whakamahia?
Find it protecting inputs on ICs or microcontrollers. It clamps voltage surges. It provides a simple voltage reference. It stabilizes voltage in low-power supplies. It is common in many electronic devices.

How is it different from a regular diode?
Regular diodes block reverse current. This Zener diode conducts reverse current at 7.5V. Regular diodes are for rectification. This Zener is for voltage regulation and protection.

(MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123)