R-6 정류기 다이오드 20A10 20A 1000V 다이오드

정류기 다이오드 개요

정류 다이오드는 주로 교류 전류를 변환하는 데 사용되는 반도체 장치입니다. (교류) 직류로 (DC). 전류가 한 방향으로 쉽게 흐르도록 하고 반대 방향으로는 전류를 차단합니다.. 이러한 단방향 특성으로 인해 전원 공급 장치의 필수 구성 요소가 됩니다., 신호 처리, 그리고 각종 전자회로. 정류기 다이오드는 광범위한 전류 및 전압을 처리할 수 있습니다., 수많은 응용 분야에 다용도로 사용 가능.

정류 다이오드의 특징

단방향 전도도: 한 방향으로만 전류 흐름을 촉진합니다., 역전류를 효과적으로 차단.
고전류 처리: 상당한 순방향 전류를 전달하도록 설계됨, 고전력 애플리케이션에 적합.
피크 역전압 (PIV): 파손 없이 높은 역전압을 견딜 수 있음.
낮은 순방향 전압 강하: 열로 인한 에너지 손실 최소화, 효율성 향상.
빠른 복구 시간: 전도 상태에서 비전도 상태로 빠르게 전환, 고주파 애플리케이션에 유리함.
열 안정성: 넓은 온도 범위에서 성능 유지, 다양한 조건에서 신뢰성 보장.
컴팩트한 사이즈: 소형 폼 팩터로 컴팩트한 전자 설계에 통합이 용이함.
비용 효율적: AC-DC 변환 요구 사항에 맞는 경제적인 솔루션 제공.
다양한 패키지: 다양한 장착 요구 사항에 맞게 다양한 포장 옵션으로 제공.

(R-6 정류기 다이오드 20A10 20A 1000V 다이오드)

Specification of R-6 Rectifier Diode 20A10 20A 1000V Diode

The R-6 Rectifier Diode, model 20A10, is built for changing AC power into DC power. This diode handles heavy electrical loads well. Its main job is ensuring current flows only one way in a circuit. This prevents reverse current damage.

This diode handles a big average forward current. 그것은 관리한다 20 지속적으로 앰프. This makes it suitable for power supplies, 배터리 충전기, and industrial equipment needing steady DC power. It handles high current reliably.

The voltage rating is equally important. This diode blocks reverse voltage up to 1000 볼트. It protects circuits from high voltage spikes in the opposite direction. This high blocking voltage is crucial for safety and reliability in many mains-powered devices.

Physically, the R-6 package is common. You’ll see a sturdy, 검은색, cylindrical metal case. It has two axial leads for easy through-hole mounting on circuit boards. The metal case helps pull heat away from the internal silicon junction. Good heat dissipation is vital for handling the 20A current safely.

장착은 간단합니다. Bend the leads carefully. Insert them into the correct holes on your PCB. Solder the leads securely. Ensure the diode’s polarity matches your circuit diagram. The cathode end is usually marked with a stripe or band. Installing it backwards will cause failure.

Heat management matters. At full load, this diode gets hot. Provide adequate airflow around it. A heatsink is often necessary for continuous 20A operation. Check the datasheet for specific thermal requirements. Proper cooling extends the diode’s lifespan significantly. Overheating damages the component.

Its rugged design suits demanding environments. The R-6 diode tolerates electrical stress well. It offers dependable performance in power conversion tasks. This diode is a practical, cost-effective solution for high-current rectification needs. Engineers trust it for its proven specifications.

(R-6 정류기 다이오드 20A10 20A 1000V 다이오드)

Applications of R-6 Rectifier Diode 20A10 20A 1000V Diode

This R-6 Rectifier Diode, the 20A10 model, tackles one core job: turning AC power into smooth DC power. It handles big currents, 최대 20 앰프를 지속적으로. It also blocks high reverse voltages, rated for 1000 볼트. This makes it a solid choice for demanding power circuits.

You find this diode often inside power supplies. It converts the incoming AC voltage from the wall outlet into the DC voltage electronics need. Its ability to manage 20 amps means it works well in supplies for larger devices or equipment. These supplies power things like industrial controls or hefty audio amplifiers.

Industrial settings rely on this diode too. It’s common in battery chargers for cars, trucks, or forklifts. These chargers need diodes that manage high current without failing. Welding machines also use it. The diode helps control the heavy current flow essential for welding arcs.

Automotive systems benefit from this component. It acts in the alternator’s rectifier assembly. The alternator makes AC power. The diode changes this AC into DC to charge the car battery and run the electrical systems. Its 1000V rating protects against voltage spikes common in cars.

Renewable energy uses it. Solar panel wiring often includes these diodes. They prevent reverse current flow. This stops batteries from draining back through the panels at night. They also handle the high current generated by solar arrays.

Its high reverse voltage blocking (1000다섯) is crucial. This protects circuits from damage if voltage suddenly spikes backwards. This surge protection is vital for reliability. The diode’s robust construction handles heat well under load. This ensures long life even in tough conditions. It provides dependable rectification where power levels are significant.

회사 프로필

PDDN 광전자 기술 유한 회사, 주식회사(sales@pddn.com) 전력 전자 기술 및 전력 제품 분야의 선도적인 기업 중 하나입니다., 태양광 인버터 개발에 전적으로 참여하고 있습니다.， 변압기, 전압 조정기, 배포 캐비닛, 사이리스터， 모듈， 다이오드， 히터, 및 기타 전자 장치 또는 반도체. 우리는 사용자에게 고품질을 제공하기 위해 최선을 다할 것입니다, 효율적인 제품과 사려 깊은 서비스.

신용카드 결제가 가능합니다., 티/티, 웨스트유니언, 그리고 페이팔. PDDN은 FedEx를 통해 해외 고객에게 상품을 배송합니다., DHL, 바다로, 아니면 비행기로. If you want high-quality R-6 Rectifier Diode 20A10 20A 1000V Diode, 문의사항을 보내주세요; 우리는 당신을 돕기 위해 여기 있을 것입니다.

결제 방법

신용장, 티/티, 웨스턴 유니언, 페이팔, 신용카드 등.

선적

바다로, 비행기로, 급행으로, 고객의 요청에 따라.

보관 조건

1) 실온의 건조한 환경에 보관하세요..

2) 습기와 고온을 피하십시오.

3) 내부 포장백 개봉 후 즉시 사용.

5 FAQs of R-6 Rectifier Diode 20A10 20A 1000V Diode

What is this diode used for?
This diode changes AC power to DC power. It handles heavy currents in power supplies. You see it in battery chargers, welders, industrial gear. It makes sure electricity flows one way only.

What are its main specs?
처리합니다 20 Amps average current. 차단한다 1000 Volts peak reverse voltage. The package is R-6. This is a standard stud mount type. It connects easily to heatsinks.

Where should I use it?
Pick it for circuits needing strong DC. Think power supplies over 500W. Use it in motor drives, big battery chargers, 용접 장비. It works where high current and voltage exist. Always attach it to a heatsink.

Can it replace other diodes?
예, if specs match. Check the current rating first. Confirm the voltage rating is enough. The R-6 package fits common mounts. Verify the replacement handles your circuit’s peak current. Never use a weaker diode.

Any important limits?
Never exceed 1000V reverse voltage. Doing this destroys the diode. Keep its temperature below 150°C. Use thermal paste on the stud mount. A good heatsink is essential. Ensure connections are tight. Loose connections cause overheating.

(R-6 정류기 다이오드 20A10 20A 1000V 다이오드)