Phase Control Thyristor Module TD162N16KOF

위상 제어 사이리스터 개요

위상 제어 사이리스터, 흔히 트라이액(triac) 또는 SCR이라고 합니다. (실리콘 제어 정류기) 특정 응용 프로그램에서, 교류파형이 전도되는 위상각을 조절하여 부하에 전달되는 전력량을 제어하는데 사용되는 반도체소자이다.. 이러한 제어 방법을 위상각 제어 또는 간단히 위상 제어라고 합니다.. 위상 제어 사이리스터는 전력의 정밀한 조절이 필요한 다양한 응용 분야에 널리 사용됩니다., 조명 조광기와 같은, 모터 속도 제어, 온도 컨트롤러, 그리고 더.

위상 제어 사이리스터의 특징

위상각 제어: AC 파형의 각 반주기 내에서 전도점 조정 가능, 부하에 전달되는 평균 전력을 정밀하게 제어할 수 있습니다..

고효율: 수행 시 최소한의 손실로 작동, 효율적인 전력 제어 제공.

양방향 전도도 (트라이액): AC 애플리케이션의 경우, 트라이액은 양방향으로 전류를 전도할 수 있습니다., AC 부하의 전파 제어에 적합합니다..

단방향 전도도 (SCR): SCR은 전류를 한 방향으로만 전도하며 일반적으로 AC 또는 DC 부하의 반파 제어에 사용됩니다..

게이트 트리거링: 게이트 단자에 작은 전류를 가하면 전도가 시작됩니다., 턴온 포인트를 쉽게 제어할 수 있습니다..

래칭 전류: 일단 트리거되면, 사이리스터는 사이리스터를 통과하는 전류가 유지 전류라고 하는 특정 수준 아래로 떨어질 때까지 계속 전도됩니다..

온도 감도: 성능은 온도 변화에 영향을 받을 수 있습니다., 설계 시 열 관리 고려 사항 필요.

전압 및 전류 정격: 다양한 애플리케이션 요구 사항에 맞게 광범위한 전압 및 전류 정격으로 제공.

소음 발생: 전자기 간섭을 일으킬 수 있음 (EMI), 민감한 응용 분야에서는 적절한 필터링 및 차폐가 필요합니다..

보호 메커니즘: 장치 및 연결된 시스템을 보호하기 위해 과전압 및 과전류 조건에 대한 보호 기능이 내장된 경우가 많습니다..

(Phase Control Thyristor Module TD162N16KOF)

Specification of Phase Control Thyristor Module TD162N16KOF

The Stage Control Thyristor Component TD162N16KOF is made for high-power AC control applications. It handles voltage approximately 1600V and current approximately 162A. The component fits systems requiring exact phase-angle control. It works in rectifiers, motor controllers, and power regulators. The thyristor structure ensures reputable switching under hefty lots.

The module features a low thermal resistance layout. Warmth spreads equally throughout the baseplate. This protects against hotspots throughout continual procedure. The isolation voltage in between terminals and baseplate is 4000V. It supports safe combination right into high-voltage arrangements. Placing usages conventional screw or stress clamp techniques. Setup stays straightforward for industrial atmospheres.

Electrical specs consist of a maximum joint temperature of 125 ℃. Entrance set off present remains listed below 200mA. This minimizes drive circuit intricacy. Turn-off time is enhanced for 50-60Hz frequencies. Rise present resistance gets to 2.5 kA for 10ms. The module withstands unexpected overloads without failure.

Building makes use of sophisticated pressure contact technology. Internal connections prevent cable bonds. This boosts mechanical security. The ceramic substrate ensures insulation and thermal conductivity. All materials meet high-temperature endurance standards. Long-term reliability is guaranteed under severe problems.

Applications cover industrial motor drives, 용접 장치, 및 UPS 시스템. It fits heater controls and lighting law. Compatibility with typical warm sinks streamlines thermal management. Individuals achieve reliable cooling without personalized services.

The TD162N16KOF meets worldwide safety and efficiency qualifications. RoHS compliance eliminates unsafe substances. Quality tests include thermal cycling and high-voltage seclusion checks. Each unit goes through extensive inspection before shipment.

This component balances power managing with small dimensions. It changes bulkier settings up in space-constrained setups. Maintenance needs are marginal due to durable design. Efficiency stays secure throughout temperature level changes.

Technical support covers circuit style and troubleshooting. Datasheets give comprehensive rankings and contours. Customized setups are offered for specific demands. The product suits both OEMs and retrofit tasks.

Safety standards suggest proper snubber circuits and overvoltage security. Appropriate gateway driving makes certain optimal changing habits. Derating contours assist prevent operation past restrictions.

(Phase Control Thyristor Module TD162N16KOF)

Applications of Phase Control Thyristor Module TD162N16KOF

The Stage Control Thyristor Module TD162N16KOF takes care of high-power applications. It manages air conditioning power by changing voltage and current timing. This component matches commercial systems requiring exact control. It works with voltages as much as 1600V and currents approximately 162A. Its layout guarantees stable performance in difficult settings.

Industrial motor drives utilize this module for speed control. Machines like conveyor belts or pumps require variable rates. The module adjusts power input to match demand. This lowers energy waste. It likewise avoids electric motor damage from sudden begins.

Illumination systems take advantage of this thyristor module. Huge locations or streetlights call for flexible brightness. The module smoothly alters power degrees. This stays clear of flickering. It extends light life by decreasing anxiety throughout modifications.

Heater count on this module for temperature level control. Furnaces or stoves need steady warm levels. The component adjusts power to heating elements. This keeps temperatures accurate. It stops overheating. Power usage stays reliable.

Power supplies utilize the TD162N16KOF for voltage stabilization. Devices like commercial chargers or converters needs stable power. The component corrects voltage variations. This secures tools from damage. Result continues to be regular under load adjustments.

Renewable resource systems integrate this component for grid monitoring. Solar or wind configurations face variable power generation. The component changes stage angles to sync with the grid. It makes certain smooth energy transfer. Rises or drops in supply are minimized.

Soft starters for heavy machinery depend upon this module. Motors in compressors or crushers require progressive acceleration. The module ramps up power gradually. Mechanical tension decreases. Upkeep costs decrease. Downtime is reduced.

The TD162N16KOF provides dependability in high-stress setups. Its sturdy build resists heat and electric sound. Links stay protected under resonance. This component suits manufacturing facilities, power plants, or facilities jobs. It fulfills rigorous safety requirements. Functional risks are reduced.

회사 프로필

PDDN 광전자 기술 유한 회사, 주식회사(sales@pddn.com) 전력 전자 기술 및 전력 제품 분야의 선도적인 기업 중 하나입니다., 태양광 인버터 개발에 전적으로 참여하고 있습니다.， 변압기, 전압 조정기, 배포 캐비닛, 사이리스터， 모듈， 다이오드， 히터, 및 기타 전자 장치 또는 반도체. 우리는 사용자에게 고품질을 제공하기 위해 최선을 다할 것입니다, 효율적인 제품과 사려 깊은 서비스.

신용카드 결제가 가능합니다., 티/티, 웨스트유니언, 그리고 페이팔. PDDN은 FedEx를 통해 해외 고객에게 상품을 배송합니다., DHL, 바다로, 아니면 비행기로. If you want high-quality Phase Control Thyristor Module TD162N16KOF, 문의사항을 보내주세요; 우리는 당신을 돕기 위해 여기 있을 것입니다.

결제 방법

신용장, 티/티, 웨스턴 유니언, 페이팔, 신용카드 등.

선적

바다로, 비행기로, 급행으로, 고객의 요청에 따라.

보관 조건

1) 실온의 건조한 환경에 보관하세요..

2) 습기와 고온을 피하십시오.

3) 내부 포장백 개봉 후 즉시 사용.

5 FAQs of Phase Control Thyristor Module TD162N16KOF

What is the Phase Control Thyristor Module TD162N16KOF used for?
The TD162N16KOF controls power in AC systems. It manages phase angles to adjust voltage or current levels. Common applications include motor speed regulation, industrial heating systems, and lighting control. It handles high-power loads efficiently.

What are the voltage and current ratings of the TD162N16KOF?
The module supports a maximum repetitive off-state voltage of 1600V. It handles an average forward current of 162A. These ratings make it suitable for heavy-duty industrial equipment. Always check system requirements before installation.

How do I install the TD162N16KOF correctly?
Mount the module on a heat sink using thermal grease. Secure connections with proper torque to avoid overheating. Ensure wiring matches the terminal labels. Test the system at low power first. Follow the manufacturer’s guidelines for safety.

What protection features does the TD162N16KOF offer?
The module includes overvoltage and surge protection. It resists voltage spikes up to specified limits. Pair it with external fuses or circuit breakers for added safety. Regular maintenance helps prevent unexpected failures.

Why choose the TD162N16KOF over other thyristor modules?
It combines high reliability with low thermal resistance. The design ensures stable performance under extreme conditions. It reduces energy loss compared to older models. The module is widely compatible with industrial control systems.

(Phase Control Thyristor Module TD162N16KOF)