MM5Z24VT1 DIODE ZENER 100MW 24V SOD523

Introduction of MM5Z24VT1 DIODE ZENER 100MW 24V SOD523

The MM5Z24VT1 DIODE ZENER 100MW 24V SOD523 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. 분리된 모듈과 달리, MM5Z24VT1 DIODE ZENER 100MW 24V SOD523 does not use transformers or similar isolation components to separate inputs and outputs. 이 디자인은 회로 구조를 단순화합니다., 비용 절감, 효율성을 향상시킵니다..

 

Features and Benefits of MM5Z24VT1 DIODE ZENER 100MW 24V SOD523

컴팩트한 디자인: 추가 절연 구성 요소가 필요하지 않기 때문에, MM5Z24VT1 DIODE ZENER 100MW 24V SOD523s are typically smaller and lighter in weight.

고성능: 절연 부품으로 인한 에너지 손실 감소로 전반적인 변환 효율이 향상됩니다..

저렴한 비용: 값비싼 절연 부품이 제거됩니다., 결과적으로 제조 비용이 절감됩니다..

빠른 응답: 내장형 고속 복구 다이오드 (FRD) 온 상태에서 차단 상태로 빠르게 전환 가능, 스위칭 손실 감소.

높은 신뢰성: 열악한 환경에서도 안정적인 작동을 보장하기 위해 고급 소재와 기술이 사용됩니다..

설치 및 유지 관리가 쉽습니다.: 표준화된 인터페이스와 연결은 설치 과정을 단순화하고 추후 유지 관리를 용이하게 합니다..

(MM5Z24VT1 DIODE ZENER 100MW 24V SOD523)

Specification of MM5Z24VT1 DIODE ZENER 100MW 24V SOD523

This MM5Z24VT1 diode is a Zener diode. 주요 업무는 전압 조정입니다.. It keeps a steady voltage across itself when reverse-biased. The target voltage here is 24 볼트. This is its nominal Zener voltage, or Vz. The actual voltage might be slightly different. It typically falls between 22.8 볼트와 25.2 볼트. This variation is normal for these components.

The diode handles a continuous power dissipation of 100 밀리와트. This power rating is crucial. Exceeding it can damage the diode. It comes in a very small SOD523 surface-mount package. This tiny size makes it perfect for modern electronics. 회로 기판의 귀중한 공간을 절약합니다.. You’ll find it used in portable gadgets and other compact devices.

Electrical characteristics matter. The reverse leakage current, Ir, is very low. It’s typically just 0.1 microamps at 19 볼트. This means almost no wasted current before it starts regulating. The maximum dynamic impedance, Zzt, ~이다 90 ohms at the test current. A lower impedance generally means better voltage control. The test current, Izt, ~이다 5 밀리암페어. This is the current where the specified Zener voltage is measured.

Its thermal resistance is 800°C/W. This number tells you how well heat escapes from the junction. A lower number is better for heat flow. The diode works fine in temperatures from -55°C to +150°C. This covers most normal operating conditions. It stores safely between -55°C and +150°C.

People use this diode in many circuits. It protects sensitive inputs from voltage spikes. It sets reference voltages accurately. It regulates voltage in low-power supplies. It clamps signals to safe levels. Its small size and reliable performance make it a popular choice. It works well in battery-powered devices. It is common in sensors, communication modules, and control circuits.

(MM5Z24VT1 DIODE ZENER 100MW 24V SOD523)

Applications of MM5Z24VT1 DIODE ZENER 100MW 24V SOD523

The MM5Z24VT1 is a Zener diode. It provides a stable 24V reference voltage. This voltage regulation happens in reverse bias mode. The diode handles up to 100 밀리와트의 전력. Its small SOD523 package saves board space. This size suits modern electronics well.

Engineers use this diode often for voltage regulation. It keeps a steady 24V output even if the input voltage changes slightly. This stability is important. It protects sensitive circuits downstream. Power supplies and sensor circuits benefit from this.

Voltage clamping is another key job. The MM5Z24VT1 clamps voltage spikes to 24V. 이렇게 하면 손상을 방지할 수 있습니다.. Surge protection circuits rely on this clamping action. It shields microcontrollers and other ICs from unexpected high voltage events. Signal lines use it for protection too.

The diode also serves as a simple voltage reference. Circuits needing a precise 24V point use it. This is cheaper than complex reference ICs. It works well in basic comparator circuits or setting thresholds. Accuracy is good enough for many designs.

Its tiny SOD523 package is a major advantage. This surface-mount device fits densely packed PCBs. Automated assembly handles it easily. The small size reduces parasitic effects. High-frequency applications appreciate this.

Remember the 100mW power limit. This restricts the maximum current it can handle. Calculate the current carefully. Use a series resistor to limit current. Exceeding the power rating destroys the diode. Thermal management is less critical but still needed for reliability. Choose the right resistor value based on your supply voltage.

This diode works in battery-powered devices. Its low leakage current helps save power. Reverse leakage is minimal. This preserves battery life. Portable gadgets and IoT sensors often use components like this.

회사 프로필

PDDN 광전자 기술 유한 회사, 주식회사(sales@pddn.com) 전력 전자 기술 및 전력 제품 분야의 선도적인 기업 중 하나입니다., 태양광 인버터 개발에 전적으로 참여하고 있습니다.， 변압기, 전압 조정기, 배포 캐비닛, 사이리스터， 모듈， 다이오드， 히터, 및 기타 전자 장치 또는 반도체. 우리는 사용자에게 고품질을 제공하기 위해 최선을 다할 것입니다, 효율적인 제품과 사려 깊은 서비스.

신용카드 결제가 가능합니다., 티/티, 웨스트유니언, 그리고 페이팔. PDDN은 FedEx를 통해 해외 고객에게 상품을 배송합니다., DHL, 바다로, 아니면 비행기로. If you want high-quality MM5Z24VT1 DIODE ZENER 100MW 24V SOD523, 문의사항을 보내주세요; 우리는 당신을 돕기 위해 여기 있을 것입니다.

 

결제 방법

신용장, 티/티, 웨스턴 유니언, 페이팔, 신용카드 등.

 

선적

바다로, 비행기로, 급행으로, 고객의 요청에 따라.

 

보관 조건

1) 실온의 건조한 환경에 보관하세요..

2) 습기와 고온을 피하십시오.

3) 내부 포장백 개봉 후 즉시 사용.

5 FAQs of MM5Z24VT1 DIODE ZENER 100MW 24V SOD523

The MM5Z24VT1 is a Zener diode. 처리합니다 100 밀리와트의 전력. Its voltage rating is 24 볼트. The package type is SOD523. This diode controls voltage in circuits.

What does this diode do? It maintains a steady 24V output. It protects sensitive parts from voltage spikes. Think of it as a safety valve for electricity.

What are its main specs? Power dissipation is 100mW. Zener voltage is 24V. The SOD523 package is tiny. 이는 회로 기판의 공간을 절약합니다..

일반적으로 어디에 사용됩니까?? You find it in portable gadgets. Examples include smartphones and tablets. It also works in power adapters. Voltage regulators need it too.

Why choose this diode? Its small size fits compact designs. It uses very little power. Performance stays reliable under stress. It’s affordable for bulk projects.

How should you store it? Keep it in anti-static bags. Avoid moisture. Handle it with grounded tools. Static electricity can damage it.

This diode suits automated assembly. It withstands soldering heat well. Follow the datasheet for exact mounting steps.

(MM5Z24VT1 DIODE ZENER 100MW 24V SOD523)