MMSZ7V5ET1 ダイオード ツェナー 7.5V 500MW SOD123

Introduction of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. 独立したモジュールとは異なります, MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. この設計により回路構造が簡素化されます, コストを削減する, 効率が向上します.

 

Features and Benefits of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

コンパクトな設計: 追加の絶縁コンポーネントが必要ないため, MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123s are typically smaller and lighter in weight.

高性能: 絶縁コンポーネントによるエネルギー損失の削減により、全体的な変換効率が向上します.

低コスト: 高価な絶縁コンポーネントは不要, 製造コストの削減につながります.

素早い応答: 内蔵ファストリカバリダイオード (FRD) オン状態からブロッキング状態に素早く切り替えることができます, スイッチング損失の低減.

高い信頼性: 過酷な環境下でも安定した動作を実現する先進の素材と技術を採用.

設置とメンテナンスが簡単: 標準化されたインターフェースと接続により、設置プロセスが簡素化され、後のメンテナンスが容易になります。.

(MMSZ7V5ET1 ダイオード ツェナー 7.5V 500MW SOD123)

Specification of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

MMSZ7V5ET1はツェナーダイオードです. It offers voltage regulation at 7.5 ボルト. This component takes care of up to 500 ミリワットの電力. It makes use of the tiny SOD123 surface-mount package. This size conserves space on modern-day motherboard. The SOD123 style is common and simple to position automatically.

Its key work is keeping a secure 7.5 V推奨電圧. It does this in reverse prejudice procedure. The voltage tolerance is limited. The nominal Zener voltage (Vz) は 7.5 V. The real voltage gauged at the test current (イズト) of 5mA falls between 7.13 Vと 7.87 V. This accuracy is essential for reliable circuits.

The diode handles an optimal reverse present (Ir) の 100 nanoamps. This reduced leak existing takes place at 4 volts reverse bias. The optimum Zener insusceptibility (Zzt) は 20 オーム. This impedance is measured at the test current of 5mA. A reduced insusceptibility frequently indicates much better voltage law under changing tons conditions.

The optimal power dissipation (Ptot) is 500mW. This rating is vital for style. Exceeding it harms the diode. The operating temperature level variety is vast. It functions from -65 ℃～ +150 ℃. This makes it ideal for numerous settings. The diode is unidirectional. It conducts present openly in the forward instructions like a standard diode. In reverse bias, it regulates voltage once break down takes place.

Regular uses include voltage clamping. It safeguards sensitive inputs from overvoltage spikes. It functions well as a simple voltage reference. Designers utilize it for waveform shaping. It discovers functions in power supplies and signal conditioning circuits. Its small size and reliable efficiency make it popular. The MMSZ7V5ET1 offers an affordable option for 7.5 V policy requirements. Constantly inspect the datasheet for absolute maximum scores. Make sure appropriate warm dissipation in your design.

(MMSZ7V5ET1 ダイオード ツェナー 7.5V 500MW SOD123)

MMSZ7V5ET1 ダイオード ツェナー 7.5V 500MW SOD123 のアプリケーション

The MMSZ7V5ET1 is a 7.5 V Zener diode. It takes care of 500mW power. Its tiny SOD123 bundle fits limited spaces. This diode controls voltage specifically. You can utilize it in numerous circuits.

One primary work is voltage regulation. It maintains a stable 7.5 V output. Position it across a power supply. It clamps the voltage at 7.5 V. This shields delicate parts downstream. 電圧スパイクを停止します. It prevents over-voltage damage. It’s good for protecting inputs on ICs or sensing units. It absorbs unexpected rises quickly.

It also helps signal securing. It quits signals going too expensive. It clips waveforms over 7.5 V. This is useful in audio circuits. It safeguards analog-to-digital converters. It makes sure signals remain within secure restrictions.

Another usage is offering a steady recommendation voltage. You need a known voltage point. This diode gives a set 7.5 V reference. 電源に使用します. Utilize it in voltage monitors. It aids compare other voltages accurately.

Its little size aids in mobile gadgets. Believe phones, タブレットコンピュータ, ウェアラブル. It fits on crowded circuit card. It saves room. It does not add much weight.

It defends against electrostatic discharge. ESD can fry electronics. This diode diverts the rise harmlessly. Place it near ports. Position it on information lines. It guards ports like USB.

You see it in power management circuits. It stabilizes prejudice factors. It protects low-power microcontrollers. It protects communication lines like I2C or SPI. It makes sure secure operation.

It’s dependable for basic tasks. It’s cost-effective. Its specifications are distinct. It carries out constantly. Engineers trust it for simple security. It uses a solid service without intricacy. It satisfies typical style requirements.

会社概要

PDDN フォトエレクトロン テクノロジー株式会社, 株式会社(sales@pddn.com) パワーエレクトロニクス技術とパワー製品の大手企業の1つです, 太陽光発電インバーターの開発に全面的に取り組んでいます， 変圧器, 電圧レギュレータ, 配電盤, サイリスタ， モジュール， ダイオード， ヒーター, およびその他の電子デバイスまたは半導体. ユーザーに高品質なサービスを提供することに尽力していきます, 効率的な製品と思いやりのあるサービス.

クレジットカードによる支払いを受け付けます, T/T, ウェストユニオン, とペイパル. PDDN は FedEx を通じて海外の顧客に商品を発送します。, DHL, 海によって, または空路で. 高品質をお求めの場合は MMSZ7V5ET1 ダイオードツェナー 7.5V 500MW SOD123, お問い合わせをお送りください; 私たちはあなたを助けるためにここにいます.

 

支払い方法

信用状, T/T, ウエスタンユニオン, ペイパル, クレジットカードなど.

 

出荷

海沿い, 飛行機で, 速達で, 顧客の要求に応じて.

 

保管条件

1) 室温の乾燥した環境に保管してください.

2) 湿気や高温を避けてください.

3) 内包装袋開封後はすぐにご使用ください.

5 MMSZ7V5ET1 ダイオード ツェナー 7.5V 500MW SOD123 の FAQ

MMSZ7V5ET1とは?
これはツェナーダイオードです. 電圧を調整します. Its main job is maintaining a steady 7.5 volts across its terminals. You use it in circuits needing stable voltage.

What does it do?
The diode lets current flow backwards once voltage hits 7.5 ボルト. これ “breakdown” keeps the voltage at 7.5V. It protects sensitive parts from voltage spikes. It gives a stable reference voltage.

Key specifications?
Its voltage is 7.5 ボルト. その電力定格は、 500 ミリワット. It comes in a tiny SOD123 surface-mount package. This saves space on circuit boards. Its tolerance is usually ±5%.

Where is it used?
Find it protecting inputs on ICs or microcontrollers. It clamps voltage surges. It provides a simple voltage reference. It stabilizes voltage in low-power supplies. It is common in many electronic devices.

How is it different from a regular diode?
Regular diodes block reverse current. This Zener diode conducts reverse current at 7.5V. Regular diodes are for rectification. This Zener is for voltage regulation and protection.

(MMSZ7V5ET1 ダイオード ツェナー 7.5V 500MW SOD123)