MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO

Introduction of MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO

The MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. A differenza dei moduli isolati, MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO does not use transformers or similar isolation components to separate inputs and outputs. Questo design semplifica la struttura del circuito, riduce i costi, e migliora l'efficienza.

 

Features and Benefits of MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO

Design compatto: Perché non sono necessari componenti di isolamento aggiuntivi, MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SOs are typically smaller and lighter in weight.

Prestazioni elevate: La ridotta perdita di energia dovuta ai componenti di isolamento migliora l'efficienza complessiva di conversione.

Basso costo: Vengono eliminati i costosi componenti di isolamento, con conseguente riduzione dei costi di produzione.

Risposta rapida: Il diodo a recupero rapido integrato (FRD) può passare rapidamente da uno stato attivo a uno stato di blocco, riducendo le perdite di commutazione.

Alta affidabilità: Materiali e tecnologie avanzati vengono utilizzati per garantire un funzionamento stabile anche in ambienti difficili.

Facile da installare e mantenere: Interfacce e connessioni standardizzate semplificano il processo di installazione e facilitano la manutenzione successiva.

(MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO)

Specification of MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO

The MMSZ5238ET1 is a Zener diode. Regola la tensione nei circuiti. This diode maintains a steady voltage level. It protects sensitive components from overvoltage. Engineers use it for voltage reference tasks too. It is designed for surface-mount assembly. The SO package is compact. This saves space on circuit boards. The device is small and efficient.

Its key specification is the Zener voltage. This voltage is 8.7 volt. The voltage is tightly controlled. This ensures reliable performance. The tolerance is acceptable for most uses. La potenza nominale è 500 milliwatt. This tells you the maximum power it can handle. Exceeding this limit damages the diode. Keep the power dissipation below 500mW.

The diode is a two-pin component. The pins are clearly marked. This simplifies circuit design and soldering. It fits standard SO footprint layouts. Manufacturers use it in many applications. Funziona bene negli alimentatori. It stabilizes output voltages effectively. It protects input stages in circuits. It prevents damage from voltage spikes. It is common in consumer electronics. You find it in telecom equipment too. Automotive systems utilize its stability.

Handling requires care. Follow standard ESD precautions. Observe the polarity during installation. Connect the cathode correctly. Mounting follows standard reflow profiles. Controlla la scheda tecnica per i dettagli esatti. Temperature affects performance slightly. The voltage changes with temperature. This change is predictable. Designers account for it. The diode operates reliably within its ratings. It is a dependable choice for 8.7V regulation.

(MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO)

Applications of MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO

The MMSZ5238ET1 diode is a Zener diode. Funziona a 8.7 volt. Gestisce 500 milliwatt di potenza. The diode comes in a small SO package. This package has two pins. Engineers use this diode often. It helps control voltage in circuits. This is voltage regulation.

One main job is keeping a steady voltage. Circuits need stable power. This diode provides that stability. It acts like a pressure valve. It lets extra voltage flow away. This stops the voltage from getting too high. Sensitive parts stay safe. Voltage spikes can damage electronics. This diode protects against those spikes.

Another use is signal clamping. Signals sometimes go outside safe levels. The diode clips these signals. It stops them from exceeding the set voltage. This protects input pins on chips. The diode can also set reference voltages. Some circuits need a precise voltage point. The 8.7V Zener provides a reliable reference.

Its small size is a big advantage. The SO package saves space. It fits easily onto circuit boards. Designers use it in portable gadgets. Telefoni, compresse, and small sensors often need it. Power supplies for microcontrollers use it too. It ensures the processor gets clean power.

The diode handles moderate power. The 500mW rating is sufficient for many tasks. It works well in low-power designs. Battery-operated devices benefit from its efficiency. Engineers trust its predictable behavior. The breakdown voltage is stable. It performs reliably under normal conditions. This makes circuit design simpler. You know what the diode will do.

Profilo Aziendale

PDDN Photoelectron Technology Co., Ltd.(vendite@pddn.com) è una delle aziende leader nella tecnologia dell'elettronica di potenza e nei prodotti energetici, che è pienamente coinvolta nello sviluppo di inverter solari， trasformatori, regolatori di tensione, armadi di distribuzione, tiristori， moduli， diodi， riscaldatori, e altri dispositivi elettronici o semiconduttori. Ci impegneremo a fornire agli utenti prodotti di alta qualità, prodotti efficienti e servizio premuroso.

Accetta il pagamento tramite Carta di Credito, T/T, Unione occidentale, e Paypal. PDDN spedirà la merce ai clienti all'estero tramite FedEx, DHL, via mare, o per via aerea. If you want high-quality MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO, vi preghiamo di inviarci richieste; saremo qui per aiutarti.

 

Metodi di pagamento

L/C, T/T, Unione occidentale, PayPal, Carta di credito ecc.

 

Spedizione

Via mare, per via aerea, per espresso, come richiedono i clienti.

 

Condizioni di conservazione

1) Conservare in un ambiente asciutto a temperatura ambiente.

2) Evitare l'umidità e le alte temperature.

3) Utilizzare immediatamente dopo aver aperto la confezione interna.

5 FAQs of MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO

What is the MMSZ5238ET1 diode used for?
The MMSZ5238ET1 is an 8.7V Zener diode. Regola la tensione nei circuiti. You use it to keep a voltage point stable at 8.7 volt. It protects sensitive parts from voltage spikes. It works by allowing current to flow backwards when voltage exceeds 8.7V.

Where do you typically find this diode?
This diode fits well in small electronic devices. Funziona negli alimentatori. It protects inputs and outputs on circuit boards. You see it in battery-powered gadgets. It is common in voltage reference circuits. Its small size makes it good for tight spaces.

What is the specific voltage for this Zener?
The MMSZ5238ET1 has a Zener voltage of 8.7 volt. This is its breakdown voltage. The voltage is set during manufacturing. It ensures regulation at this level. It is the key specification for this part.

Why pick this specific Zener diode model?
This model is small. It uses a SOD-123 surface mount package. Gestisce fino a 500 milliwatt di potenza. It is reliable for common 8.7V needs. It is easy to solder onto boards. It offers good performance for its size.

How do you use this diode correctly?
Connect the diode properly. The cathode (marked band) goes to the higher voltage. The anode connects to ground or lower voltage. You need a resistor in series. This resistor limits the current. Controlla la scheda tecnica per i limiti esatti. Make sure the voltage stays near 8.7V.

(MMSZ5238ET1 DIODE ZENER 8.7V 500MW 2PIN SO)