DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

Introduction of DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

The DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

Compact design: Because no additional isolation components are required, DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

Keandalan Tinggi: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Mudah dipasang dan dirawat: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923)

Specification of DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

This diode is the DZ9F13S92-7. It is a Zener diode. Its main job is voltage regulation. It keeps the voltage steady at 13 volt. This is its Zener voltage. Ini menangani hingga 200 milliwatts of power. This is its power dissipation rating. You cannot exceed this limit. The diode comes in a SOD923 package. This package is very small. It saves space on circuit boards. It is a surface-mount device. It gets soldered directly onto the PCB.

The diode controls voltage in reverse bias. It lets current flow backwards once voltage hits 13V. It clamps the voltage to this level. It protects sensitive parts. It prevents voltage spikes. It stabilizes power supplies. Designers use it for precise voltage references. It works well in low-power circuits. It fits portable gadgets. It suits battery-operated devices. Its small size is key for miniaturization.

Check the voltage tolerance. It is not exactly 13.000 volts every time. There is a small variation. This is normal for Zener diodes. Consider the power dissipation. 200mW is the absolute maximum. Run it below this for reliability. Heat affects performance. Keep it cool. The SOD923 package has two terminals. Soldering needs care. Use proper techniques. Follow the manufacturer’s data sheet. It has all the details. It shows the current-voltage curve. It lists thermal characteristics.

Pick this diode for 13V regulation needs. Use it where space is tight. It works in voltage clamps. It works in shunt regulators. It protects inputs from overvoltage. It is a common component. It is reliable for its job. Its specs meet many design requirements. Ensure your circuit current stays safe. Stay within the power limit. The diode does its job well under these conditions. It is a standard choice for 13V applications.

(DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923)

Applications of DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

This Zener diode, the DZ9F13S92-7, gives a stable 13 volt. It handles 200 milliwatts of power. It’s small, using the SOD923 package. This makes it good for tight circuit boards.

Its main job is voltage regulation. Circuits often need steady voltages. The power supply might change. This diode keeps the voltage steady at 13 volt. It acts like a pressure release. It shunts extra voltage away. This protects sensitive parts.

It works well as a voltage reference. Some circuits need a known voltage point. This diode provides that 13V reference. It’s reliable for this job. It helps measure other voltages accurately.

Protecting circuits is another key use. Voltage spikes happen. They can damage electronics. This diode helps prevent that. If the voltage jumps above 13 volt, the diode conducts. It pulls the voltage down. This shields other components.

It’s used for signal clamping too. Sometimes signals need limiting. The diode stops signals from going too high. It clips them at 13 volt. This is common in communication circuits.

The small SOD923 size saves space. Modern electronics are compact. This diode fits easily. It’s suitable for phones, tablets, and other gadgets. It works well in battery-powered devices. Its low power needs help conserve energy. Engineers pick it for portable electronics. It offers reliable performance. It handles common voltage tasks efficiently.

Profil Perusahaan

PDDN Fotoelektron Technology Co., Ltd.(penjualan@pddn.com) adalah salah satu perusahaan terkemuka di bidang teknologi elektronika daya dan produk daya, yang terlibat penuh dalam pengembangan inverter surya， transformator, pengatur tegangan, lemari distribusi, thyristor， modul， dioda， pemanas, dan perangkat elektronik atau semikonduktor lainnya. Kami akan berkomitmen untuk menyediakan layanan berkualitas tinggi kepada pengguna, produk yang efisien dan layanan penuh perhatian.

Ia menerima pembayaran melalui Kartu Kredit, T/T, Serikat Barat, dan Paypal. PDDN akan mengirimkan barang ke pelanggan di luar negeri melalui FedEx, DHL, melalui laut, atau melalui udara. If you want high-quality DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923, silakan kirimkan pertanyaan kepada kami; kami akan berada di sini untuk membantu Anda.

 

Metode Pembayaran

L/C, T/T, Serikat Barat, Paypal, Kartu Kredit dll.

 

Pengiriman

Melalui laut, melalui udara, dengan mengungkapkan, sebagai permintaan pelanggan.

 

Kondisi Penyimpanan

1) Simpan di lingkungan kering pada suhu kamar.

2) Hindari lembab dan suhu tinggi.

3) Gunakan segera setelah membuka kantong kemasan bagian dalam.

5 FAQs of DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

What voltage does the DZ9F13S92-7 Zener diode regulate?
The DZ9F13S92-7 diode regulates voltage at 13 volt. This means it keeps a steady 13V across its terminals when operated correctly in reverse bias. You use it where you need a stable 13V reference point or protection level.

What kind of package is the DZ9F13S92-7 diode in?
This diode uses the SOD923 surface-mount package. SOD923 is very small. It is suitable for tight spaces on circuit boards. Its small size makes it good for compact electronic devices.

How much power can the DZ9F13S92-7 Zener diode handle?
The DZ9F13S92-7 has a power rating of 200 milliwatts (200mW). This is the maximum power it can safely dissipate. You must ensure the actual power in your circuit stays below this limit. Exceeding it can damage the diode.

Where can I use the DZ9F13S92-7 Zener diode?
You often use this diode for voltage regulation. It provides a stable 13V output in simple power supplies. Another common use is voltage clamping. It protects sensitive components from voltage spikes by limiting the voltage to 13V. It also works well as a voltage reference signal.

What are the key specifications for the DZ9F13S92-7?
The key specs are its Zener voltage of 13V and its power dissipation of 200mW. It uses the SOD923 surface-mount package. Its small size and specific voltage make it useful in many electronic circuits needing 13V stability or protection.

(DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923)