DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

Introduction of DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

The DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Kontrèman ak modil izole, DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923 does not use transformers or similar isolation components to separate inputs and outputs. Konsepsyon sa a senplifye estrikti sikwi a, diminye pri, ak amelyore efikasite.

 

Features and Benefits of DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

Konsepsyon kontra enfòmèl ant: Paske pa gen okenn eleman izolasyon adisyonèl ki nesesè, DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923s are typically smaller and lighter in weight.

Segondè pèfòmans: Redwi pèt enèji akòz konpozan izolasyon amelyore efikasite konvèsyon an jeneral.

Pri ki ba: Konpozan izolasyon chè yo elimine, sa ki lakòz pi ba pri fabrikasyon.

Repons rapid: Dyòd rekiperasyon rapid entegre (FRD) ka byen vit chanje soti nan yon eta sou nan yon eta bloke, diminye pèt pou chanje.

Segondè fyab: Materyèl avanse ak teknoloji yo itilize pou asire operasyon ki estab menm nan anviwònman difisil.

Fasil pou enstale epi kenbe: Koòdone estanda ak koneksyon senplifye pwosesis enstalasyon an epi fasilite antretyen pita.

(DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923)

Specification of DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

This diode is the DZ9F13S92-7. Li se yon dyod Zener. Travay prensipal li se règleman vòltaj. It keeps the voltage steady at 13 vòlt. Sa a se vòltaj Zener li yo. Li okipe jiska 200 miliwatt pouvwa. This is its power dissipation rating. You cannot exceed this limit. The diode comes in a SOD923 package. Pake sa a piti anpil. Li ekonomize espas sou tablo sikwi. It is a surface-mount device. It gets soldered directly onto the PCB.

The diode controls voltage in reverse bias. It lets current flow backwards once voltage hits 13V. It clamps the voltage to this level. It protects sensitive parts. Li anpeche Spikes vòltaj. Li estabilize ekipman pou pouvwa. Designers use it for precise voltage references. It works well in low-power circuits. It fits portable gadgets. It suits battery-operated devices. Its small size is key for miniaturization.

Check the voltage tolerance. It is not exactly 13.000 volts every time. There is a small variation. This is normal for Zener diodes. Consider the power dissipation. 200mW is the absolute maximum. Run it below this for reliability. Heat affects performance. Keep it cool. The SOD923 package has two terminals. Soldering needs care. Use proper techniques. Follow the manufacturer’s data sheet. It has all the details. It shows the current-voltage curve. It lists thermal characteristics.

Pick this diode for 13V regulation needs. Use it where space is tight. It works in voltage clamps. It works in shunt regulators. It protects inputs from overvoltage. It is a common component. It is reliable for its job. Its specs meet many design requirements. Ensure your circuit current stays safe. Stay within the power limit. The diode does its job well under these conditions. It is a standard choice for 13V applications.

(DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923)

Applications of DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

This Zener diode, the DZ9F13S92-7, gives a stable 13 vòlt. Li okipe 200 miliwatt pouvwa. It’s small, using the SOD923 package. This makes it good for tight circuit boards.

Travay prensipal li se règleman vòltaj. Circuits often need steady voltages. The power supply might change. This diode keeps the voltage steady at 13 vòlt. It acts like a pressure release. It shunts extra voltage away. This protects sensitive parts.

It works well as a voltage reference. Some circuits need a known voltage point. This diode provides that 13V reference. It’s reliable for this job. It helps measure other voltages accurately.

Protecting circuits is another key use. Voltage spikes happen. They can damage electronics. This diode helps prevent that. If the voltage jumps above 13 vòlt, the diode conducts. It pulls the voltage down. This shields other components.

It’s used for signal clamping too. Sometimes signals need limiting. The diode stops signals from going too high. It clips them at 13 vòlt. This is common in communication circuits.

The small SOD923 size saves space. Modern electronics are compact. This diode fits easily. It’s suitable for phones, tablets, and other gadgets. Li travay byen nan aparèy ki mache ak pil. Its low power needs help conserve energy. Engineers pick it for portable electronics. Li ofri pèfòmans serye. It handles common voltage tasks efficiently.

Konpayi Profile

PDDN Photoelectron Teknoloji Co., Ltd.(sales@pddn.com) se youn nan antrepwiz dirijan yo nan teknoloji elektwonik pouvwa ak pwodwi pouvwa, ki se konplètman patisipe nan devlope varyateur solè， transfòmatè, regilatè vòltaj, kabinèt distribisyon, tiristor， modil yo， dyod， aparèy chofaj, ak lòt aparèy elektwonik oswa semi-conducteurs. Nou pral pran angajman pou bay itilizatè yo bon jan kalite, pwodwi efikas ak sèvis atansyon.

Li aksepte peman atravè kat kredi, T/T, West Union, ak Paypal. PDDN pral voye machandiz yo bay kliyan lòt bò dlo atravè FedEx, DHL, pa lanmè, oswa pa lè. If you want high-quality DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923, tanpri voye nou kesyon; nou pral la pou ede w.

 

Metòd Peman

L/C, T/T, Western Union, Paypal, Kat kredi elatriye.

 

chajman

Pa lanmè, pa lè, pa eksprime, jan kliyan mande.

 

Kondisyon Depo

1) Sere nan yon anviwònman sèk nan tanperati chanm.

2) Evite tanperati imid ak wo.

3) Sèvi ak imedyatman apre ouvèti sak anbalaj anndan an.

5 FAQs of DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923

What voltage does the DZ9F13S92-7 Zener diode regulate?
The DZ9F13S92-7 diode regulates voltage at 13 vòlt. This means it keeps a steady 13V across its terminals when operated correctly in reverse bias. You use it where you need a stable 13V reference point or protection level.

What kind of package is the DZ9F13S92-7 diode in?
This diode uses the SOD923 surface-mount package. SOD923 is very small. It is suitable for tight spaces on circuit boards. Its small size makes it good for compact electronic devices.

How much power can the DZ9F13S92-7 Zener diode handle?
The DZ9F13S92-7 has a power rating of 200 miliwatt (200mw). This is the maximum power it can safely dissipate. You must ensure the actual power in your circuit stays below this limit. Depase li ka domaje dyod la.

Where can I use the DZ9F13S92-7 Zener diode?
You often use this diode for voltage regulation. It provides a stable 13V output in simple power supplies. Another common use is voltage clamping. It protects sensitive components from voltage spikes by limiting the voltage to 13V. It also works well as a voltage reference signal.

What are the key specifications for the DZ9F13S92-7?
The key specs are its Zener voltage of 13V and its power dissipation of 200mW. It uses the SOD923 surface-mount package. Its small size and specific voltage make it useful in many electronic circuits needing 13V stability or protection.

(DZ9F13S92-7 DIODE ZENER 13V 200MW SOD923)