MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

Introduction of MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

The MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123s are typically smaller and lighter in weight.

Visoke performanse: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Jednostavan za postavljanje i održavanje: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123)

Specification of MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

This diode is the MMSZ5256ET1. It is a Zener diode. Its job is voltage regulation. It keeps a steady voltage level in circuits. Its specific Zener voltage rating is 30 volti. This voltage is its key characteristic. It defines its behavior in reverse bias. The diode can handle power up to 500 milliwatts. This is its maximum power dissipation limit. Exceeding this limit damages the diode. The package type is SOD123. This is a small surface-mount package. It is suitable for modern electronics assembly. The SOD123 package saves space on circuit boards. The diode has two terminals. These connect it to the circuit. It operates reliably within its specifications. Engineers choose this diode for voltage reference points. They use it in power supplies. It protects sensitive components from voltage spikes. It clamps voltage surges to safe levels. It helps stabilize voltage outputs. Its small size makes it versatile. It fits into compact designs. The 30V rating is common for many applications. The 500mW power rating is standard. This diode is a fundamental component. It is widely available. Designers trust its performance. It offers precise voltage control. It is essential for reliable circuit operation. The SOD123 package ensures easy soldering. It meets industry standards. This diode is a practical solution. It addresses common voltage regulation needs.

(MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123)

Applications of MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

The MMSZ5256ET1 is a Zener diode. It helps control voltage in electronic circuits. This diode breaks down at 30 volti. Podnosi do 500 milliwatts of power. Its small SOD123 package saves space on circuit boards. Engineers often use it for voltage regulation. It keeps the voltage steady at 30 volti. If the input voltage rises above 30 volti, the diode starts conducting. This action clamps the voltage to a safe level. It protects sensitive parts downstream. Voltage regulation is key in power supplies. It ensures other chips get stable power. Without regulation, voltage spikes can damage components. The diode acts like a safety valve.

Another use is overvoltage protection. Sudden voltage surges happen. These surges can come from static electricity or other sources. The diode provides a path for the excess voltage. It shunts the surge away from delicate parts. This protects inputs and outputs on circuits. Protecting circuits prevents costly failures. It is common in data lines and power inputs. The diode’s quick response time is important here.

This diode also works well as a voltage reference. Some circuits need a precise voltage point. The 30V breakdown voltage is stable. Designers use it to set accurate thresholds. It is useful in comparator circuits. Comparators check if a signal is above or below a set point. The Zener provides that reference point reliably. Its stability matters for accuracy.

Voltage clamping is another application. Sometimes signals need limiting. The diode prevents signals from exceeding 30 volti. It clips off the tops of voltage waveforms. This shaping protects circuits and shapes signals. It finds use in communication circuits. Clipping ensures signals stay within safe levels.

Its small SOD123 package is an advantage. It fits into tight spaces on modern electronics. This is crucial for smartphones and laptops. Power handling is enough for many low-power jobs. It is not for high-power applications. The MMSZ5256ET1 is a versatile part. It solves common voltage control problems efficiently.

Profil tvrtke

PDDN Photoelectron Technology Co., doo(prodaja@pddn.com) jedno je od vodećih poduzeća u tehnologiji energetske elektronike i energetskih proizvoda, koja je u potpunosti uključena u razvoj solarnih pretvarača， transformatori, regulatori napona, razvodni ormari, tiristori， moduli， diode， grijalice, i druge elektroničke uređaje ili poluvodiče. Bit ćemo posvećeni pružanju korisnicima visoke kvalitete, učinkoviti proizvodi i pažljiva usluga.

Prihvaća plaćanje putem kreditne kartice, T/T, West Union, i Paypal. PDDN će robu slati kupcima u inozemstvo putem FedExa, DHL, morem, ili zrakom. If you want high-quality MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123, pošaljite nam upite; mi ćemo biti ovdje da vam pomognemo.

 

Načini plaćanja

L/C, T/T, Western Union, Paypal, Kreditna kartica itd.

 

otprema

Po moru, zračnim putem, ekspresno, prema zahtjevima kupaca.

 

Uvjeti skladištenja

1) Čuvati u suhom okruženju na sobnoj temperaturi.

2) Izbjegavajte vlagu i visoke temperature.

3) Upotrijebite odmah nakon otvaranja unutarnje vrećice za pakiranje.

5 FAQs of MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

What is the MMSZ5256ET1 diode? The MMSZ5256ET1 is a Zener diode. Its main job is voltage regulation. It keeps a steady voltage level in electronic circuits. This diode works well for protecting sensitive parts from too much voltage.

What voltage does the MMSZ5256ET1 regulate? This diode regulates at 30 volti. Its Zener voltage is 30V. It starts conducting current effectively once the voltage across it hits this 30V point. This makes it suitable for circuits needing that specific clamp voltage.

What is the power rating? The diode can handle up to 500 milliwatts of power. This is its maximum power dissipation. Exceeding this limit will damage the diode. Ensure your circuit keeps the power below 500mW for safe operation.

Where is this diode typically used? Use this diode for voltage clamping. Use it for voltage regulation in low-power circuits. Common applications include protecting inputs on integrated circuits. It also protects outputs from voltage spikes. You find it in power supplies and signal conditioning circuits.

How should I handle this diode? Handle the diode carefully. Observe proper polarity during installation. The cathode end is usually marked with a band. Connect this band to the more positive voltage point in your circuit. Avoid exceeding its maximum ratings for voltage, trenutni, and power. Use it within the specified temperature range for best results.

(MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123)