MMSZ13ET1 DIODE ZENER 13V 500MW SOD-123

Introduction of MMSZ13ET1 DIODE ZENER 13V 500MW SOD-123

The MMSZ13ET1 DIODE ZENER 13V 500MW SOD-123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ13ET1 DIODE ZENER 13V 500MW SOD-123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ13ET1 DIODE ZENER 13V 500MW SOD-123

Compact design: Because no additional isolation components are required, MMSZ13ET1 DIODE ZENER 13V 500MW SOD-123s are typically smaller and lighter in weight.

Visoke performanse: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

Visoka pouzdanost: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Jednostavan za postavljanje i održavanje: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ13ET1 DIODE ZENER 13V 500MW SOD-123)

Specification of MMSZ13ET1 DIODE ZENER 13V 500MW SOD-123

This diode is the MMSZ13ET1. It is a Zener diode. Its main job is voltage regulation. It keeps a steady 13 volti. This happens when you connect it backwards. That’s its reverse breakdown voltage. Podnosi do 500 milliwatts of power. This is its maximum power dissipation. Don’t exceed this limit. It comes in a SOD-123 package. This surface-mount package is very small. It saves space on circuit boards. The SOD-123 is popular for modern electronics. It has two terminals. Soldering it is straightforward. Engineers often use this diode type. They need stable voltage references. This diode provides that at 13 volti. It protects sensitive parts too. Voltage spikes can damage circuits. The MMSZ13ET1 clamps those spikes. It keeps the voltage at or below 13 volti. This protects other components. It’s reliable for basic regulation tasks. You’ll find it in power supplies. It works in signal conditioning circuits. Its small size is a big plus. It fits into tight spaces. Its performance is predictable. That’s important for stable circuit operation. The 500mW rating is standard. It suits many common applications. Check the datasheet for exact details. Temperature affects its voltage slightly. Know the operating temperature range. The SOD-123 package is widely available. Sourcing it is usually easy. It offers good value. This diode is a practical choice. Use it where 13V regulation is needed. It handles typical electronic demands well.

(MMSZ13ET1 DIODE ZENER 13V 500MW SOD-123)

Applications of MMSZ13ET1 DIODE ZENER 13V 500MW SOD-123

The MMSZ13ET1 is a Zener diode. Its voltage is 13 volti. Its power rating is 500 milliwatts. It comes in a small SOD-123 package. This diode controls voltage. It lets current flow backwards when a certain voltage is reached. This voltage is 13V.

One main job is voltage regulation. Circuits need stable voltage. The Zener diode helps. It keeps the voltage steady at 13V. This is important for sensitive parts. These parts might break if voltage changes. The diode prevents this. It holds the voltage line steady. You see this in power supplies. You see it feeding other circuits.

Another job is overvoltage protection. Voltage spikes happen sometimes. These spikes can damage electronics. The MMSZ13ET1 protects against this. It clamps the voltage. It stops the voltage from going too high. It keeps it at or below 13V. This protects other components. Use it on input lines. Use it on output lines. It acts like a safety net.

You can use it for voltage shifting too. Sometimes you need a specific voltage drop. The Zener diode provides this. It drops 13V across itself. This sets a voltage point. It references other parts of the circuit. This is useful in level shifting circuits. It helps match different voltage levels.

The diode also serves as a voltage reference. Some circuits need a precise voltage. They need it to compare other voltages. The 13V Zener provides a stable reference point. It is accurate enough for many uses. It is simpler than complex reference chips. It works well in basic comparator circuits. It works in some sensor circuits.

Its small size is an advantage. The SOD-123 package saves space. Modern electronics are often compact. This diode fits easily onto circuit boards. It handles the power needs of many designs. It is reliable for common tasks.

Profil tvrtke

PDDN Photoelectron Technology Co., doo(prodaja@pddn.com) jedno je od vodećih poduzeća u tehnologiji energetske elektronike i energetskih proizvoda, koja je u potpunosti uključena u razvoj solarnih pretvarača， transformatori, regulatori napona, razvodni ormari, tiristori， moduli， diode， grijalice, i druge elektroničke uređaje ili poluvodiče. Bit ćemo posvećeni pružanju korisnicima visoke kvalitete, učinkoviti proizvodi i pažljiva usluga.

Prihvaća plaćanje putem kreditne kartice, T/T, West Union, i Paypal. PDDN će robu slati kupcima u inozemstvo putem FedExa, DHL, morem, ili zrakom. If you want high-quality MMSZ13ET1 DIODE ZENER 13V 500MW SOD-123, pošaljite nam upite; mi ćemo biti ovdje da vam pomognemo.

 

Načini plaćanja

L/C, T/T, Western Union, Paypal, Kreditna kartica itd.

 

otprema

Po moru, zračnim putem, ekspresno, prema zahtjevima kupaca.

 

Uvjeti skladištenja

1) Čuvati u suhom okruženju na sobnoj temperaturi.

2) Izbjegavajte vlagu i visoke temperature.

3) Upotrijebite odmah nakon otvaranja unutarnje vrećice za pakiranje.

5 FAQs of MMSZ13ET1 DIODE ZENER 13V 500MW SOD-123

What is the MMSZ13ET1 diode?
The MMSZ13ET1 is a Zener diode. It regulates voltage in electronic circuits. It ensures voltage stays steady at a specific level.

What voltage does the MMSZ13ET1 regulate?
This diode maintains a voltage of 13 volti. Its Zener voltage is 13V. It starts conducting significantly at this voltage to clamp it.

How much power can the MMSZ13ET1 handle?
The diode can manage up to 500 milliwatts of power. This is its maximum power dissipation. Exceeding this limit can damage the diode.

What package is the MMSZ13ET1 in?
It comes in the SOD-123 surface mount package. This is a small plastic case. It has two terminals for soldering onto circuit boards.

Where is the MMSZ13ET1 typically used?
You find it in voltage regulation tasks. Common uses include protecting sensitive components from overvoltage. It stabilizes voltage levels in power supplies. It also provides reference voltages.

(MMSZ13ET1 DIODE ZENER 13V 500MW SOD-123)