25A 1000V Diode Bridge Rectifier KBU2510

Alaldi dioodide ülevaade

Alaldi dioodid on pooljuhtseadmed, mida kasutatakse peamiselt vahelduvvoolu muundamiseks (AC) alalisvooluks (DC). Need võimaldavad voolu hõlpsat voolamist ühes suunas, blokeerides selle vastupidises suunas. See ühesuunaline omadus muudab need toiteallikate olulisteks komponentideks, signaali töötlemine, ja mitmesugused elektroonilised vooluringid. Alaldi dioodid suudavad toime tulla mitmesuguste voolude ja pingetega, muutes need mitmekülgseks paljude rakenduste jaoks.

Alaldi dioodide omadused

Ühesuunaline juhtivus: Hõlbustab voolu liikumist ainult ühes suunas, blokeerib tõhusalt pöördvoolu.
Kõrge voolu käsitsemine: Kavandatud oluliste voolude edasikandmiseks, sobib suure võimsusega rakendustele.
Maksimaalne pöördpinge (PIV): Talub kõrgeid pöördpingeid ilma purunemata.
Madal edasimineku pingelangus: Minimeerib energiakadu soojusena, tõhususe parandamine.
Kiire taastumisaeg: Liigub kiiresti juhtivast olekust mittejuhtivasse olekusse, kasulik kõrgsageduslike rakenduste jaoks.
Termiline stabiilsus: Säilitab jõudluse laias temperatuurivahemikus, töökindluse tagamine erinevates tingimustes.
Kompaktne suurus: Väike vormitegur hõlbustab integreerimist kompaktsetesse elektroonilistesse kujundustesse.
Tasuv: Pakub säästlikku lahendust vahelduvvoolu-alalisvoolu muundamiseks.
Erinevad paketid: Saadaval mitmes pakendis, mis vastavad erinevatele paigaldusnõuetele.

(25A 1000V Diode Bridge Rectifier KBU2510)

Specification of 25A 1000V Diode Bridge Rectifier KBU2510

The KBU2510 is a high-performance 25A 1000V single-phase bridge rectifier created for transforming alternating current (A/C) to route existing (DC) in various power supply applications. Encapsulated in a compact, insulated KBU plastic plan, this rectifier incorporates 4 high-efficiency diodes in a full-wave bridge setup, making certain trusted and efficient rectification. The tool is built to deal with high voltage and current needs, making it perfect for industrial, äri, and customer electronics.

With an optimal average ahead rectified present of 25A, the KBU2510 supports continuous procedure under hefty lots. It includes a peak repeated reverse voltage (VRRM) of 1000V, providing durable defense against voltage spikes and surges popular environments. The non-repetitive peak ahead surge present (IFSM) gets to 350A, guaranteeing durability throughout short-duration overloads. Each diode leg has a reduced onward voltage decline of around 1.0 V kl 12.5 A, lessening power loss and improving thermal effectiveness.

The rectifier runs throughout a broad temperature array, alates -55 ° C kuni +150 °C, ensuring stability in severe conditions. Its shielded plastic case includes a pre-installed warm sink hole (M5 screw dimension) for protected mounting and effective warm dissipation, essential for maintaining performance in high-temperature applications. The KBU2510’s terminals are developed for easy through-hole installing on printed circuit card (PCBd) or straight connection to external wiring, providing versatility in layout.

Compliant with RoHS and get to environmental standards, this rectifier is free from harmful compounds, aligning with international security laws. Applications consist of AC/DC converters, mootori ajamid, akulaadijad, keevitustööriistad, and commercial power products. Its rugged building, integrated with high seclusion voltage (2500V RMS), ensures durability and security in circuits exposed to high voltage transients.

Secret specifications include an optimal reverse leakage current of 10µA at 1000V, junction-to-case thermal resistance of 1.5 ° C/W, and a storage temperature series of -55 ° C kuni +150 °C. The KBU2510’s mix of high present capacity, pinge vastupidavus, and thermal efficiency makes it a trustworthy selection for designers looking for a long lasting, high-efficiency correction option.

(25A 1000V Diode Bridge Rectifier KBU2510)

Applications of 25A 1000V Diode Bridge Rectifier KBU2510

The 25A 1000V Diode Bridge Rectifier KBU2510 is a robust, high-performance component developed to transform alternating existing (KONDITSEER) marsruuti kohal (DC) in a variety of commercial, tööstuslik, and consumer applications. With an optimal average onward present ranking of 25A and a height repetitive reverse voltage of 1000V, this rectifier is developed to handle requiring electric atmospheres while guaranteeing efficiency, usaldusväärsus, and sturdiness. Selle kompaktne, single-phase bridge arrangement simplifies circuit design and installation, making it ideal for systems requiring secure DC power.

A key application of the KBU2510 is in power supply systems for commercial equipment, consisting of motor drives, automation systems, and machinery control panels. Its high existing and voltage scores guarantee seamless procedure in durable settings, such as welding makers, akulaadijad, ja katkematu toitematerjalid (UPS). The rectifier’s ability to withstand rise currents and short-term voltages makes it suitable for usage in AC/DC converters, where constant performance under load variations is critical.

In renewable resource systems, the KBU2510 is usually integrated into solar inverters and wind generator controllers to correct AC generated by generators or grid-tie inverters. It guarantees effective power conversion while decreasing power loss, adding to the overall efficiency of eco-friendly energy remedies. Lisaks, the rectifier is widely used in vehicle charging systems, such as EV chargers and generator correction circuits, where high voltage tolerance and thermal stability are essential.

The KBU2510’s tough building and construction, featuring a thermally efficient metal real estate, permits it to operate reliably in high-temperature environments, such as commercial heaters, heating and cooling systems, and power distribution units. Its compact style conserves room in PCB formats, making it a favored choice for customer electronics like LED motorists, home devices, and audio amplifiers.

Designers value the KBU2510 for its reduced onward voltage decrease and high rise present ability, which reduce power waste and improve system long life. With qualifications for security and performance compliance, this diode bridge rectifier is a flexible, cost-effective remedy for applications requiring high-power rectification, pikaealisus, and thermal durability. Whether in industrial automation, taastuvenergia, or automotive systems, the KBU2510 delivers reputable performance under tough problems.

Ettevõtte profiil

Luoyang Datang Energy Tech Co.Ltd(sales@pddn.com) on üks juhtivaid jõuelektroonika tehnoloogia ja energiatoodete ettevõtteid, mis on täielikult kaasatud päikeseenergia inverterite väljatöötamisse， trafod, pinge regulaatorid, jaotuskapid, türistorid， moodulid， dioodid， küttekehad, ja muud elektroonilised seadmed või pooljuhid. Oleme pühendunud kasutajatele kvaliteetse pakkumise pakkumisele, tõhusad tooted ja tähelepanelik teenindus.

See aktsepteerib makseid krediitkaardiga, T/T, West Union, ja Paypal. PDDN saadab kaubad FedExi kaudu välismaistele klientidele, DHL, meritsi, või õhuga. If you want high-quality 25A 1000V Diode Bridge Rectifier KBU2510, palun saatke meile päringud; me oleme siin, et teid aidata.

Makseviisid

L/C, T/T, Western Union, Paypal, Krediitkaart jne.

Saadetis

Merega, õhuga, ekspressi teel, vastavalt klientide soovile.

Säilitamistingimused

1) Hoida kuivas keskkonnas toatemperatuuril.

2) Vältige niisket ja kõrget temperatuuri.

3) Kasutage kohe pärast sisemise pakkekoti avamist.

5 FAQs of 25A 1000V Diode Bridge Rectifier KBU2510

The KBU2510 is a 25A 1000V diode bridge rectifier designed to convert alternating current (AC) alalisvoolule (DC) suure võimsusega rakendustes. It is commonly used in power supplies, mootori ajamid, tööstusseadmed, and appliances requiring efficient AC-to-DC conversion. Selle vastupidav konstruktsioon tagab töökindluse nõudlikes keskkondades, making it suitable for machinery, keevitusseadmed, and battery chargers where stable DC output is critical.

The KBU2510 has a maximum average forward current rating of 25A and a peak repetitive reverse voltage of 1000V. It can handle surge currents up to 350A for short durations, such as during power-up or transient overloads. Exceeding these ratings may cause permanent damage, so ensure the operating conditions stay within specified limits to maintain performance and longevity.

Jah, a heat sink is recommended when operating the KBU2510 near its maximum current rating or in high-temperature environments. While the rectifier can operate within a temperature range of -55°C to +150°C, prolonged use without proper thermal management may lead to overheating, reduced efficiency, or failure. Adequate heat dissipation ensures optimal performance, especially in continuous high-load applications.

Install the KBU2510 by securely mounting it to a heat sink using the threaded stud or bracket. Connect the AC input terminals to the alternating voltage source and the DC output terminals to the load, ensuring correct polarity. Use insulated tools and follow safety protocols to avoid short circuits. Verify all connections are tight and the rectifier is placed in a well-ventilated area.

The KBU2510 can replace similar bridge rectifiers if their electrical specifications and physical dimensions match. Confirm the replacement model’s current rating, pinge nimiväärtus, pin configuration, and package size (KBU series standard). Always cross-reference datasheets to ensure compatibility, as incorrect substitutions may lead to circuit failure or safety hazards.

(25A 1000V Diode Bridge Rectifier KBU2510)